startup guide
We recommend that you select Never.
f) Automatically remove on: Optionally, select a date for the automatic removal of the profile from the mobile devices.
We recommend that you do not set a date.
4. Click Show next to Operating systems and select the version of the operating system the profile applies to. Select all relevant iOS versions for this profile.
The list includes the iOS versions of already enrolled devices, and a generic version iOS that covers all supported iOS versions.
5. To add password policies to the profile, click Add configuration, select Password policies and click Next.
6. On the Password policies page, configure the required password settings.
For a detailed description of the settings, click Help on the system information bar.
7. Click Apply to save your settings.
The Password policies configuration is displayed on the Edit profile page under
Configurations.
8. To add restrictions to the profile, click Add configuration again, select Restrictions and click
Next.
9. On the Restrictions page, select the required restrictions.
Some restrictions require a certain device type or iOS version. These requirements are shown to the right of each restriction.
For a detailed description of the settings, click Help on the system information bar.
10. Click Apply to save your settings.
The Restrictions configuration is displayed on the Edit profile page under Configurations.
11. On the Edit profile page, click Save to save the profile.
The profile is displayed on the Profiles and policies page and is available for transfer onto Apple iOS devices.
If required, create additional profiles for Exchange ActiveSync settings, VPN settings, Wi-Fi settings and for the installation of root and client certificates.
15.2 Create task bundles for iOS devices
1. On the menu sidebar, under CONFIGURE, click Task bundles > Apple iOS to open the Task
bundles page, and then click Create task bundle.
29
Sophos Mobile Control
2. On the Edit task bundle page, configure the following settings: a) Name: Enter a name for the task bundle. We recommend that you use the name
iOS SSP task bundle
for task bundles that are applied during enrollment through the Self Service
Portal.
b) Version: Optionally, enter a version number for the task bundle.
c) Description: Enter a description for the task bundle, for example
base SSP task bundle
.
d) Selectable for compliance actions: When you select this option, the task bundle can be loaded onto a device when the device breaks a compliance rule.
3. Click Show next to Operating systems and select the version of the operating system the task bundle applies to. Select all relevant iOS versions for this task bundle.
The list includes the iOS versions of already enrolled devices, and a generic version iOS that covers all supported iOS versions.
4. Click Create task, select Enroll and enter a name for the task. Click Apply to create the task.
The name that you enter here will be displayed on the Self Service Portal while the task is processed.
5. Click Create task again and select Install profile or assign policy. Give the task a meaningful name, for example
Install password policies profile
, and select the profile you have created (
iOS SSP profile
, if you have used the suggested name). Click Apply to create the task.
6. If you have configured profiles for Exchange ActiveSync, VPN or Wi-Fi settings, repeat the previous step for each profile.
7. If required, add further tasks to the task bundle.
Tip: You can change the installation order of the tasks by using the sort arrows on the right-hand side of the tasks list.
8. After you have added all required tasks to the task bundle, click the Save button on the Edit
task bundle page.
The task bundle is displayed on the Task bundles page and is available for transfer onto Apple iOS devices.
30
