Step 4: Connect the Ethernet Cable. ACTi E31, E34, E33, E32

Hardware Manual

3.

Secure the clamping nut to the body.

NOTE:

Make sure the clamping nut is tight to avoid possible water leak.

Step 4: Connect the Ethernet Cable

1.

Connect the Ethernet cable to the Ethernet port inside the camera.

2.

When done, close the back cover by tightening the three (3) screws.

NOTE:

Make sure the rubber ring on the cover is secured and the screws are completely tightened to avoid possible water leak.

18 www.acti.com