advertisement
▼
Scroll to page 2
of
35
• CMP BIOS
Note
CMP is a Supervisor 1 only feature.
This figure shows the ISSU process.
Figure 1: ISSU Process
Note
CMP is a Supervisor 1 only feature.
Virtualization Support
When you upgrade the Cisco NX-OS software, you upgrade the software for all virtual device contexts (VDCs) on the physical device. You cannot upgrade the Cisco NX-OS software for an individual VDC.
3
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 2 About Software Images
- 2 About In-Service Software Upgrades on Devices with Dual Supervisor Modules
- 3 Virtualization Support
- 4 Parallel Upgrade
- 4 Parallel Upgrade with I/O Modules
- 4 Parallel Upgrade with Fabric Extenders
- 4 Prerequisites for Upgrading the Cisco NX-OS Software
- 5 Cisco NX-OS Software Upgrade Guidelines
- 15 Cisco NX-OS Software Downgrade Guidelines
- 15 Upgrading a Device with Dual Supervisor Modules
- 16 Benefits of Using the install all Command
- 17 ISSU Failure Conditions
- 17 Upgrade Procedure Summary
- 18 Detailed Upgrade Procedure
- 20 Upgrading a Device with a Single Supervisor Module
- 20 Upgrade Procedure Summary
- 21 Detailed Upgrade Procedure
- 23 Performing a Traditional Upgrade or Downgrade (Chassis Reload)
- 24 Example Outputs from Cisco NX-OS Software Upgrades
- 24 Example Nondisruptive Upgrade of a Device with Dual Supervisors
- 29 Example Disruptive Upgrade of a Device with Dual Supervisors
- 31 Example Disruptive Upgrade of a Device with a Single Supervisor
- 32 Obtaining Documentation and Submitting a Service Request
- 32 Feature History for Software Upgrade and Downgrade