Bearer Bars Properties. Esko DeskPack PowerLayout

DeskPack PowerLayout

4

Position: Cut Marks will be automatically attached to a currently selected PowerLayout

Standalone grid or another selected Dynamic Mark. If no grid or Dynamic Mark is selected, the

Cut Mark is attached to the Trim Box.

Color: Cut Marks are by default in "Darkest" color.

Offset: allows to define the offset for the Cut Marks. A positive offset will move the Cut Marks to the outside.

Symbol: allows to change the symbol used for the Cut Mark. See

Changing the Symbol of a

Standard Mark

on page 129,

Bearer Bars Properties

Adding a Bearer Bars mark will create two bars, one on each side, left and right (default) or top and bottom. The bars will automatically take the size (vertical or horizontal) of the "Attach" selection.

109