Color Patch Properties. Esko DeskPack PowerLayout

4

DeskPack PowerLayout

Using the buttons, you can define if you want corner marks on the bounding box of the selected Attach To area, or on the corners of every one-up. This option is only available if you attached the corner mark to a Repeat Grid.

Set Symbol: allows to change the symbol used for the Gradation Strip Mark. See

Changing the

Symbol of a Standard Mark

on page 129.

Offset allows to define the offset between the corner and the corner mark. If the lock is enabled, vertical and horizontal offset are kept the same. If the lock is disabled, you can enter different values for vertical and horizontal offset.

If an offset of 0mm is used (in the image underneath on the left), the bounding box of the corner mark is placed on the outside of the selected page box. The page box is shown in red, the corner mark in black and the bounding box in blue.

In the image on the right, the default offset of -8mm is used. You can see the Corner Mark being moved 8 mm to the inside, based on the original position. Since the default symbol is

10 mm by 10mm, this default setting places the corner mark at 2 mm to the outside of the selected page box.

Color Patch Properties

Color Patch marks are created from a symbol named "ColorPatch".

114