![](http://s2.manualzz.com/store/data/044588114_1-36223dacc22f7dd8c34bb67e14d2501a-128x128.png)
advertisement
![Ubee DVW32CB | Manualzz Ubee DVW32CB | Manualzz](http://s2.manualzz.com/store/data/044588114_1-36223dacc22f7dd8c34bb67e14d2501a-360x466.png)
8 Understanding the Parental Control Menu
Parental Controls allow you to control Internet access for users on the DVW32CB network. Parental Controls provides the following features:
Define user/password access.
Block specific Web sites and Web sites based on keywords.
Define the times users are allowed to access the Internet.
View a local log to view Internet activity.
Topics
See the following topics:
Using the Parental Control User Setup Option on page 66
Using the Basic Option on page 68
Using the ToD Filter Option on page 69
Using the Local Log Option on page 70
To access the parental control menu:
1. Access the Web interface. Refer to Accessing the Web User Interface Locally on page
14 .
2. Click the Parental Control link from the top of the screen.
8.1
Using the Parental Control User Setup Option
The User Setup option allows you to configure which user accounts can or cannot connect to your wireless or wired network, and the parameters of each connection.
To configure user accounts:
1. Click the Parental Control link from the top of the screen.
2. The User Setup screen is displayed. The User Setup fields are explained following the screen example.
Note: To enable Parental Control, refer to
Using the Basic Option on page 68
.
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • April 2017
66
Ubee Interactive
Label
Add User
Remove User
Enable
Password
Re-Enter Password
Trusted User
Content Rule
White List Access Only
Time Access Rule
Session Duration
Description
Defines user accounts.
To select an existing user, choose the user from the User Settings drop-down menu.
To add a new user, add the user name and click Add. Note that the user name cannot contain any spaces.
To activate the user, check Enable.
To remove a user, select the user from the drop-down menu and click Remove
User.
Defines the password for this user. It is required when this user tries to access the
Internet via the device.
Confirms the password with the re-entered password.
Each specified user may also be enabled as a “trusted user” which means that person will have access to all Internet content regardless of filters that may be set up.
This check box can be used as a simple override to grant a user full access but still having the ability to keep all of the previous settings stored and available.
Provides a drop-down list of existing content rules that define what kind of Websites the user can or cannot visit.
Selects the White List Access option. If you have created a content rule that defines a black list and white list, select the White List Access Only checkbox to force the
DVW32CB to execute the policy for the selected user.
Selects a defined time access rule to apply to the selected user.
Allows you to enter a time in minutes for the user’s session to expire. When the session expires, the user can log in again for the same session duration.
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • April 2017
67
advertisement
Related manuals
advertisement
Table of contents
- 5 1 Introduction
- 5 Understanding Safety and Regulatory Information
- 7 Understanding Connections and Applications
- 7 Requesting Support
- 8 Checking Device Package Components
- 9 Understanding the Device Panels, Connections and LEDs
- 11 Understanding Specifications, Standards, and Firmware
- 13 Understanding Default Values and Logins
- 14 Understanding the Device Label
- 16 2 Installing the DVW32CB
- 16 Setting Up and Connecting the DVW32CB
- 18 Connecting Devices to the Network
- 20 Troubleshooting the Installation
- 22 3 Using the Web User Interface
- 22 Accessing the Web User Interface Locally
- 24 Logging Out of the Web User Interface
- 26 4 Understanding the Status Menu
- 26 Using the Software Option
- 28 Using the Connection Option
- 30 Using the Account Option
- 31 Using the Diagnostics Option
- 34 Using the Client List Option
- 35 Using the User Default Option
- 36 5 Understanding the Basic Menu
- 36 Using the Setup Option
- 38 Using the DHCP Option
- 40 Using the DHCPv6 Option
- 42 Using the LAN IPv6 Option
- 43 Using the DDNS Option
- 44 Using the Static Lease Option
- 45 Using the Backup Option
- 48 Using the Time Option
- 50 6 Understanding the Advanced Menu
- 50 Using the Options Option
- 53 Using the IP Filtering Option
- 54 Using the MAC Filtering Option
- 55 Using the Port Filtering Option
- 56 Using the Forwarding Option
- 61 Using the Port Triggers Option
- 63 Using the Pass Through Option
- 64 Using the DMZ Host Option
- 66 7 Understanding the Firewall Menu
- 66 Using the Basic Option
- 67 Using the Local Log Option
- 68 Using the Remote Log Option
- 70 8 Understanding the Parental Control Menu
- 70 Using the Parental Control User Setup Option
- 72 Using the Basic Option
- 73 Using the ToD Filter Option
- 74 Using the Local Log Option
- 76 9 Understanding the Wireless Menu
- 76 Selecting the Wireless Radio Band
- 77 Using the Wireless Radio Option
- 80 Using the Primary Network Option
- 84 Using the Access Control Option
- 86 Using the Wi-Fi Multimedia Option
- 88 Using the Bridging Option
- 89 Deploying and Troubleshooting the Wireless Network
- 95 10 Understanding the Telephony Menu
- 95 10.1 Using the Status Option
- 96 10.2 Using the DHCP Option
- 98 10.3 Using the QoS Option
- 99 10.4 Using the Provisioning Option
- 100 10.5 Using the Event Log Option
- 101 11 Understanding the Battery Menu
- 101 11.1 Using the Controller Option
- 102 11.2 Using the UPS Option
- 103 11.3 Using the Interface Delay Option
- 105 12 Understanding the MoCA Menu
- 105 12.1 Using the MoCA Software Option
- 107 13 Glossary