MULTI FUNCTION DISPLAY
NDB INFORMATION PAGE
The NDB Information Page displays the following information for a selected Non-directional beacon:
• Map of surrounding area
• NDB Identifier and Symbol
• Name
• Closest city
• General location
• Latitude/longitude (degrees/minutes or degrees/ minutes/seconds), MGRS or UTM/UPS
• Magnetic Variation in degrees
• Frequency in kilohertz (kHz)
• Nearest airport (identifier, symbol, bearing, distance)
NDB Information Page Operations
The NDB Information Page allows the following operations:
• NDB selection by identifier
• NDB selection by name
• NDB selection by closest city
To change the map range, turn the joystick to the left to select a lower range, turn it to the right to select a higher range.
NDB Identifier
Name
NDB Symbol
NDB Symbol
Closest City
General Location
Magnetic
Variation
NDB Frequency
Nearest Airport; identifier, symbol, bearing,distance
Map of
Surrounding Area
190-00592-00 Rev. A
Figure 7-57 NDB Information Page
Garmin G1000 Pilot’s Guide for the Diamond DA40
7-73
7-74
MULTI FUNCTION DISPLAY
To select the NDB Information Page:
1. From any page, press and hold the CLR key to select the Navigation Map Page. You may skip this step if you are already viewing any of the
Map Group pages.
2. Turn the large FMS knob to select the ‘WPT’ page group. ‘WPT’ is displayed in the page group icon located in the lower right corner of the display.
3. Turn the small FMS knob to select the NDB
Information Page.
To select a NDB by using an Identifier:
1. With the NDB Information Page displayed, press the FMS knob to activate the cursor.
2. Turn the small and large FMS knobs to enter a name for the identifier and press the ENT key.
3. Press the FMS knob to remove the flashing cursor.
To select a NDB by using a Name:
1. With the NDB Information Page displayed, press the FMS knob to activate the cursor.
2. Turn the large FMS knobs to highlight the name field
3. Turn the large and small FMS knobs to enter a name and press the ENT key.
4. Press the FMS knob to remove the flashing cursor.
To select a NDB by using the closest city:
1. With the NDB Information Page displayed, press the FMS knob to activate the cursor.
2. Turn the large FMS knobs to highlight the closest city field
3. Turn the large and small FMS knobs to enter a city and press the ENT key.
4. Press the FMS knob to remove the flashing cursor.
NDB Information Page Options
The following NDB Information Page Options are available by pressing the MENU key (with the NDB
Information Page displayed):
• ‘View Recent NDB List’ which allows you to view the most recent NDB list.
To view the most recent NDB list:
1. Select the NDB Information Page and press
MENU to display the NDB Information Page
Options. ‘View Recent NDB List’ is highlighted.
2. Press the ENT key. Turn the small FMS knob to select an NDB from the list and press the
ENTER key. The selected NDB is now the active user NDB.
Figure 7-58 NDB Page Menu
Garmin G1000 Pilot’s Guide for the Diamond DA40
190-00592-00 Rev. A
