Specification of Ethernet Interface

Specification of Ethernet Interface

AUTOSAR Release 4.2.2

[SWS_EthIf_00130]

⌈

The Ethernet Interface shall use the buffers provided by the Ethernet Driver for VLAN support.

⌋()

7.1.7 Wake up support

The Ethernet Interface supports wake up depending on the parameter

EthIfWakeUpSupport.

Note: Enabling wake-up support in EthIf makes only sense if the underlying EthTrcv supports also wake up.

7.2 Error classification

7.2.1 Default Errors

[SWS_EthIf_00017]

⌈

Type or error Relevance Related error code Value [hex]

Invalid controller index Default Error ETHIF_E_INV_CTRL_IDX 0x01

Invalid transceiver index Default Error ETHIF_E_INV_TRCV_IDX 0x02

EthIf module was not initialized

Default Error ETHIF_E_NOT_INITIALIZED 0x03

Default Error ETHIF_E_PARAM_POINTER 0x04 Invalid pointer in parameter list

Invalid parameter

Initialization failure

⌋()

Default Error ETHIF_E_INV_PARAM

Default Error ETHIF_E_INIT_FAILED

0x05

0x06

7.2.2 Runtime Errors

There are no runtime errors.

7.2.3 Transient Faults

There are no transient faults.

7.2.4 Production Errors

There are no production errors.

7.2.1 Extended Production Errors

There are no extended production errors.

26 of 77 Document ID 417: AUTOSAR_SWS_EthernetInterface

- AUTOSAR confidential -