Install the Power Cord and Phone Line. Brother MFC-9420CN

Step 1

Setting Up the machine

6

Install the Power Cord and Phone Line

DO NOT connect the parallel or USB cable yet.

1

Make sure that the power switch is off.

Connect the AC power cord to the machine.

If you are sharing one phone line with an external telephone, connect it as shown below.

If you are sharing one phone line with an external telephone answering machine, connect it as shown below.

TAD

2

Plug the AC power cord into an AC outlet.

Turn the power switch on.

TAD

3

Connect one end of the telephone line cord to the socket on the machine marked LINE and the other end to a modular wall socket.

Please set the receive mode to

External TAD

if you have an external answering machine.

For more details, see “Connecting an external telephone answering device (TAD)” in Chapter 3 of the User’s Guide.

8

Warning

■

■

The machine must be fitted with an earthed plug.

Since the machine is grounded through the power outlet, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power cord connected to your machine when you connect it to a telephone line. Similarly, you can protect yourself when you want to move your machine by disconnecting the telephone line first and then the power cord.