advertisement
Remote Control
CONTROL REFERENCE GUIDE
7
8
1
4
5
2
3
6
TV MODE
STOP
PREV
PLAY PAUSE
SEARCH
MENU
GOTO
NEXT
MEM
M
ANGLE DISPLAY
4
7
AUDIO
ENTER
2 3
SUBTITLE/RETURN
6 5
8 9
SETUP
A-B
REPEAT
DISC
0
15
14
13
12
11
10
9
1) TV MODE button
In stop mode, select whether to output the video signal in PAL or NTSC. When the TV shows “AUTO” this means the output signal depends on the DVD If the TV shows “PAL” or “NTSC” the signal is fixed to either “PAL” or “NTSC”.
2) STOP button
Stop playing a disc.
PLAY button
Press to start or resume playback a disc.
PAUSE button
Press once to pause playback. Press subsequently
3)
4)
to advance the DVD one frame at a time.
PREV button
Move back through titles, chapters or tracks on a disc.
/
SEARCH buttons
SEARCH: Fast reverse playback.
SEARCH: Fast forward playback.
5) MEMORY button
When the STOP button has been pressed, this feature is used to enter the number of a chapter or track which you wish to save in memory.
6) Cursor ( , , , ) buttons
Use to move between selections on a menu screen and adjust certain settings.
ENTER button
Confirm selections on a menu screen.
7) Number (0 - 9) buttons
Use when creating programmes, and entering a password. Also use to select a CD track directly.
8) SETUP button
When a DVD is stopped, brings up the unit's SETUP menu.
E - 6
REPEAT A-B / DISC buttons
Perform point-to-point repeat playback on a DVD or
CD.
Repeat a DVD chapter or title.
Repeat a CD track or the entire disc.
9) SUBTITLE
.....
/ RETURN button
Select one of the subtitle languages programmed on a DVD (if available).
Return to the normal operation after using the SETUP menu of a DVD.
10)AUDIO button
Select one of the audio sound tracks on a DVD (if more than one is available) or select the audio output mode on a CD.
11)ANGLE button
Switch between multiple camera angles when the
DVD you are playing has been programmed with multiple camera angles.
12)DISPLAY button
Show status information on the screen.
13) NEXT button
Move forward through titles, chapters or tracks on a disc.
14)GOTO button
Skip directly to a location on a DVD.
15)MENU button
Enter and exit the main DVD menu.
P5-8R_QVC.PMD
6 7/23/2005, 12:26 PM
CONTROL REFERENCE GUIDE
Unit
10
DC IN 9V
CAR PLUG 12V
11
12
13
14
1
9
8
7
6
5
4
3
2
1)
- VOLUME + button
Adjusts the volume up (+) and down (-).
MENU button
Open and close DVD's menu.
PAUSE button
Press to pause playback of disc. Each time you subsequently press the PAUSE button the picture advances one frame at a time. Press the PLAY button to resume playback at normal speed.
2) AUDIO & VIDEO OUT jacks
3) Headphone jacks
4) Cursor ( , , , ) button
Use to move between selections on a menu screen and adjust certain settings.
ENTER button
5)
Confirm selections on a menu screen.
PREV button
Press PREV button to go back to previous chapters
/tracks. Press and hold PREV button to begin fast scan.
NEXT button
Press NEXT button to advance chapters / tracks.
Press and hold NEXT button to begin fast forward scan.
6) STOP button
Stop playing a disc.
PLAY button
Press to start or resume playback a disc.
7) BATTERY LOW indicator
8) Power ON indicator
When the Power ON/OFF switch is in the ON position, the light will illuminate.
9) Remote sensor
Receives the remote control unit signals
10) Disc Door
Close door by gently pushing down.
11) DC IN 9V jack
12) POWER ON/OFF switch
13) SCREEN switch
Wide screen
Normal screen
14) button
Adjust the relative lightness or darkness of the colour.
E - 7
P5-8R_QVC.PMD
7 7/23/2005, 12:26 PM
advertisement
Related manuals
advertisement