ATTO FibreBridge Installation and Operation

CLI error messages

The following error messages may be returned by the Command line Interface

ERROR. Invalid Command. Type 'Help' for command list.

ERROR. Wrong/Missing Parameters

Usage: <usage string>

ERROR. Command Not Processed

CLI summary reference

A summary of the Command Line Interface commands, their defaults, and where you can find the specific command. Commands which have no default values associated with them have a blank entry in that column of the table.

Command

AutoLogSense

AutoMap

BootFibreDelay

BootScan

BootScanPorts (FB 2400)

BridgeModel

BridgeName

ClearEventLog

ClearTraceLog

Date

DeleteAllMaps

DisplayEventLog

DisplayEventLogFilter

DisplayTraceLog

DisplayTraceLogFilter

DumpConfiguration

DumpEventLog

DumpTraceLog

EmailFromAddress

EmailNotify

EmailNotifyAddress

EmailPassword

EmailServerAddress

EmailUsername

EthernetSpeed

EventLog

EventLogFilter

Default

disabled

0 disabled auto

“ “ all all all all all all disabled

0.0.0.0

auto enabled all all all

iii

ATTO Technology Inc. FibreBridge Installation and Operation Manual

Example

set autologsense enabled automap set bootfibredelay 15 set bootscan enabled set bootscanports all get bridgemodel set bridgename Omega6 cleareventlog cleartracelog set date 03/03/03 deleteallmaps displayeventlog set displayeventlogfilter all all all displaytracelog set displaytracelogfilter all info all dumpconfiguration dumpeventlog dumptracelog get emailfromaddress get emailnotify set emailnotifyaddress 5 [email protected]

set emailpassword get emailsesrveraddress set emailusername beta321 set ethernetspeed 100 set eventlog disabled set eventlogfilter gen info enabled

Command

Exit

FCConnMode

FCDataRate

FCHard

FCHardAddress

FCMultiNode

FCPortErrors

FCPortList

FCSCSIBusyStatus

FirmwareRestart

Help

IdentifyBridge

Info

IPAddress

IPDHCP

IPDNSServer

IPGateway

IPSubnetMask

IsReserved

LogicalUnitAddressing

MaxOpTemp

MinOpTemp

OpTempWarn

Password

Performance

Ping

ReadOnlyPassword

ReadOnlyUsername

Reserve

ResetFCPortErrors

RestoreConfiguration

Route

RouteDisplay

SaveConfiguration

SCSIDomainValidation

SCSIInitId

SCSIPortBusSpeed

Default

loop auto disabled fp1=3 fp2=4 enabled busy

Example

exit set fcconnmode all ptp get fcdatarate 1 set fchard enabled set fchardaddress 1 122 set fcmultinode disabled get fcporterrors all fcportlist set fcscsibusystatus qfull disabled

10.0.0.1

enabled

0.0.0.0

255.255.0.0

disabled

70

0

5

Password

Password user

0x07 ultra320 firmwarerestart help driveinfo set identifybridge enabled info get ipaddress mp1 set ipdhcp mp1 disabled get ipdnsserver set ipgateway mp1 200.10.22.3

get ipsubnetmask mp1 isreserved set logicalunitaddressing enabled get maxoptemp set minoptemp 10 set optempwarn 15 set password get performance 2 ping mp1 192.42.155.155

get readonlypassword get readonlyusername reserve resetfcporterrors 1 restoreconfiguration default route fc 1 1 bridge routedisplay fc 1 1 saveconfiguration restart scsidomainvalidation set scsiinitid 2 12 set scsiportbusspeed 2 ultra160 iv

Command Default Example

SCSIPortList

SCSIPortReset

SCSIPortResetOnStartup

SCSIPortSyncTransfer

SCSIPortTermination

SCSIPortWideTransfer

SCSITargetLUNs

SCSITargets enabled enabled enabled enabled

8 scsiportlist scsiportreset 1 set scsiportresetonstartup 1 disabled set scsiportsynctransfer 2 disabled set scsiporttermination 1 disabled set scsiportwidetransfer 2 disabled set scsitargetluns 1 64 scsitargets 1

SerialNumber

SerialPortBaudRate

SerialPortEcho

SNMP

115200 enabled enabled get serialnumber set serialportbaudrate 19200 get seriallportecho set SNMP disabled snmpdumpmib SNMPDumpMIB

SNMPExtendedTraps disabled

SNMPTrapAddress

SNMPTraps

0.0.0.0 none disabled set snmptrapaddress 6 192.42.155.155 all set snmptraps enabled

SNTP

SNTPServer

SpeedWrite

SpeedWriteDefault enabled all disabled disabled get sntp

192.43.244.18 set sntpserver 129.6.15.28

get speedwrite scsi all set speedwritedefault enabled

TailEventLog

Temperature

Time

TimeZone

TraceLog

TraceLogFilter

Username

VerboseMode

VirtualDriveResponse

VirtualRobotResponse

Voltage

WrapEventLog

WrapTraceLog zModem

00:00:00

EST disabled all all all root enabled disabled disabled enabled enabled taileventlog get temperature set time 03:32:30 set timezone pst set tracelog enabled set tracelogfilter all all all set username Barbara set verbosemode disabled set virtualdriveresponse enabled set virtualrobotresponse enabled get voltage set wrapeventlog disabled set wraptracelog disabled zmodem receive

v

ATTO Technology Inc. FibreBridge Installation and Operation Manual