Model SR3001 User Guide AV Surround Receiver

BASIC OPERATION

(PLAY BACK)

SELECTING THE SURROUND MODE

Example : AUTO SURROUND

ADJUSTING THE TONE (BASS & TREBLE)

CONTROL

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must fi rst select the input source on the SR3001.

Example : DVD

7.1CH INPUT

STANDBY

POWER ON/OFF

INPUT SELECTOR

AV SURROUND RECEIVER SR3001

S. SPEAKER B

PHONES

DISP MULTI

SLEEP AUTO

AUTO

SURR

TUNED

DIRECT

ST V –

DISC 6.1

SURROUND

MODE

PURE

DIRECT

SIMPLE

SETUP

AUTO HT-EQ MENU

POWER

TV VCR1 DSS/VCR2 DVD

TUNER CD TAPE CDR/MD

AUX1

TV

VOL.

SLEEP

AMP

MUTE

MAIN

VOL.

OSD MENU

To select DVD, turn the INPUT FUNCTION

SELECTOR knob on the front panel or simply press the DVD button on the remote.

After you have selected DVD, simply turn on the DVD player and play the DVD.

7.1CH INPUT

STANDBY

POWER ON/OFF

INPUT SELECTOR

AV SURROUND RECEIVER SR3001

S. SPEAKER B

PHONES

DISP

SLEEP

MULTI AUTO

AUTO SURR

TUNED

DIRECT

SURROUND

MODE

PURE

DIRECT

SIMPLE

SETUP

AUTO HT-EQ MENU

SET UP/

T.TONE

PURE DIRECT AUTO

1

NIGHT

DISPLAY

CLEAR

CSII

4

MCH-ST

7

MEMO

MENU OFF

2

EX/ES

5

DTS

3

VIRTUAL

6

STEREO

8

7.1CH IN

9

A/D

0

P.SCAN/V-OFF

CHANNEL/SKIP

BASS TREBLE TUNE/SEARCH

To select the surround mode during playback, press the SURROUND MODE button on the front panel or the Surround mode buttons on the remote.

ADJUSTING THE MAIN VOLUME

AK ATT

EQ

ANALOG

DIGITAL

AAC

PCM

SURROUND

DIGITAL

L

SL

C

LFE

S

R

SR

DISPLAY MEMORY CLEAR

EXIT BAND T-MODE

DOWN

MUTE

VOLUME

ATT

UP

ENTER

TV VCR1 DSS/VCR2 DVD

TUNER CD TAPE CDR/MD

AUX1

TV

VOL.

SLEEP

AMP

MUTE

MAIN

VOL.

PURE DIRECT

NIGHT

DISPLAY

CLEAR

AUTO

1

CSII

4

MCH-ST

7

MEMO

2

EX/ES

5

DTS

3

VIRTUAL

6

STEREO

8

7.1CH IN

9

A/D

0

P.SCAN/V-OFF

CHANNEL/SKIP

BASS TREBLE

TUNE/SEARCH

T-MODE RDS F.DIRECT

INPUT/DISC+ AUDIO SUB-T/ATT PTY

CH.SEL

LIP.SYNC

During a listening session you may wish to adjust the

Bass and Treble Control to suit your listening tastes or room acoustics.

(Using the remote control unit)

To adjust the bass effect, press BASS

3 or BASS4 on the remote.

To adjust the treble effect, press TREBLE

3 or

TREBLE

4 on the remote.

Note:

The tone control function can work in the AUTO

Surround, Stereo, Dolby PLIIx, DTS, DTS-ES, and

Multi Ch. Stereo mode.

• The input name will appear in the display on the front panel.

• As the input is changed, the SR3001 will automatically switch to the digital input, surround mode, attenuation, and night mode status which were entered during the confi guration process for that source.

• When an audio source is selected, the last video input used remains routed to the VCR1 & DSS/

VCR2 Outputs and Monitor Outputs. This permits simultaneous viewing and listening to different sources.

• When a Video source is selected, the video signal for that input will be routed to the Monitor Outputs jacks and will be viewable on a TV monitor connected to the SR3001.

If a component video input is connected to the

DVD or DSS component inputs, it will be routed to the Component Video Output. Make certain that your TV is set to the proper input to view the signal.

OSD MENU

ENTER

Adjust the volume to a comfortable level using the

VOLUME control knob on the front panel or VOL

3 /

4 buttons on the remote.

To increase the volume, turn the VOLUME knob clockwise or press VOL

3 button on the remote, to decrease the volume, turn counterclockwise or press

VOL

4 button on the remote.

Notes:

• The volume can be adjusted within the range of – ∞ to

18 dB, in steps of 1 dB.

• However, when the channel level is set as described on page 20, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to 18 dB.

(In this case the maximum volume adjustment range is “18 dB - Maximum value of channel level)

TEMPORARILY TURNING OFF THE SOUND

ANALOG

DIGITAL

AAC

PCM

SURROUND

DIGITAL

L C

LFE

R

SL S SR

DISPLAY MEMORY CLEAR

EXIT BAND T-MODE

DOWN

MUTE

VOLUME

ATT

UP

TV VCR1 DSS/VCR2 DVD

TUNER CD TAPE CDR/MD

AUX1

TV

VOL.

SLEEP

AMP

MUTE

MAIN

VOL.

OSD

ENTER

MENU

To temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the front panel or MUTE button on the remote.

This will interrupt the output to all speakers and the head-phone jack, but it will not affect any recording or dubbing that may be in progress.

When the system is muted, the display will show

“MUTE” .

Press the MUTE button again to return to normal operation.

USING THE SLEEP TIMER

NIGHT MODE

TV VCR1 DSS/VCR2 DVD

TUNER CD TAPE CDR/MD

AUX1

TV

VOL.

SLEEP

AMP

MUTE

MAIN

VOL.

OSD MENU

ENTER

To program the SR3001 for automatic standby, press the SLEEP button on the remote.

Each press of the button will increase the time before shut down in the following sequence.

OFF 10 20 30 40

90 80 70 60 50

The sleep time will be shown for a few seconds in the display on the front panel, and it will count down until the time has elapsed.

When the programmed sleep time has elapsed, the unit will automatically turn off.

Note that the SLEEP indicator on the display will illuminate when the Sleep function is programmed.

To cancel the Sleep function, press the SLEEP button until the display shows “SLEEP OFF” and the SLEEP indicator will disappear.

OSD MENU

ENTER

SET UP/

T.TONE

PURE DIRECT

NIGHT

DISPLAY

CLEAR

AUTO

1

CSII

4

MCH-ST

7

MEMO

MENU OFF

2

EX/ES

5

STEREO

8

A/D

0

CHANNEL/SKIP

DTS

3

VIRTUAL

6

7.1CH IN

9

P.SCAN/V-OFF

BASS TREBLE TUNE/SEARCH

Press the NIGHT button on the remote to turn on the

NIGHT mode.

Selecting the Night Mode ON is effective in Dolby

Digital only, and it compresses the dynamic range.

This softens loud passages such as sudden explosions, to help prevent disturbing others late at night.

To turn off the Night mode, press the NIGHT button again.

23