advertisement
Chapter 5: Advanced Serverboard Setup
X5DPi-G2 Quick Reference
Jumper
JBT1
JD1
JD4
Description
CMOS Clear
Speaker Enable (page 2-11)
GLAN Enable/Disable
Default Setting
Pins 1-2 (Normal)
Close 6-7 (Enabled)
Pins 1-2 (Enabled)
JP4
JP9
VGA Enable/Disable
Power Fail Alarm En/Disable
Pins 1-2 (Enabled)
Open (Disabled)
JP13-JP15 PCI-X Bus Speed Setting
JP33 CPU Chassis/CPU Fan Select
See Chp 5 Section 9
Closed (CPU Fan)
JP37
JP38
JP39
Watch Dog Enable/Disable
Thermal Fan
Open (Disabled)
Closed (BIOS Cntrl)
Front Side (System) Bus Speed Pins 1-2 (Auto)
Connector
ATX PWR CONN
Description
Primary ATX Power Connector
DIMM#1A-DIMM#4B Memory (RAM) Slots
COM1/COM2 COM1/COM2 Serial Port Connector
CPU/CHS/OH FAN CPU/Chassis/Overheat Fan Headers
GLAN1/2 Gb Ethernet Ports
IDE#1
IDE#2
IDE #1 Hard Disk Drive Connector
IDE #2 Hard Disk Drive Connector
J7
J9
J13/J14
J15
JD1
JF2
JL1
JOH1
Parallel (Printer) Port
PS/2 Keyboard/Mouse Ports
USB2/3 Headers
Secondary ATX Power Connector
PWR LED/Speaker/NMI Header
Front Control Panel Connector
Chassis Intrusion Header
Overheat LED
JP7
JP9
JP32
JP35
JP36
JWOR
Speaker
USB0/1, 2/3
VGA
WOL
Floppy Disk Drive Connector
Third Power Supply Fail Header
ACPI/Sleep Button Header
Keylock Switch Connector
Alarm Reset Switch
Wake-on-Ring Header
Onboard Speaker Header
Universal Serial Bus Ports, Headers
VGA Display (Monitor) Port
Wake-on-LAN Header
5-11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 25 Overview
- 25 Serverboard Features
- 25 Server Chassis Features
- 25 Contacting Supermicro
- 26 Overview
- 26 Unpacking the SuperServer 6023P-i
- 26 Preparing for Setup
- 26 Choosing a Setup Location
- 26 Rack Precautions
- 26 Server Precautions
- 26 Installing the SuperServer 6023P-i into a Rack
- 26 Identifying the Sections of the Rack Rails
- 26 Installing the Chassis Rails
- 26 Installing the Rack Rails
- 26 Installing the Server into the Rack
- 26 Installing the Server into a Telco Rack
- 26 Checking the Serverboard Setup
- 26 Checking the Drive Bay Setup
- 27 Overview
- 27 Control Panel Buttons
- 27 Reset
- 27 Power
- 27 Control Panel LEDs
- 27 Overheat
- 27 Power
- 45 Serverboard LEDs
- 46 Electrical Safety Precautions
- 46 General Safety Precautions
- 46 ESD Precautions
- 46 Operating Precatutions
- 47 Handling the X5DPi-G2 Serverboard
- 47 PGA Processor and Heatsink Installation
- 47 Connecting Cables
- 47 Connecting Data Cables
- 47 Connecting Power Cables
- 47 Connecting the Control Panel
- 47 I/O Ports
- 47 Installing Memory
- 47 Adding PCI Cards
- 47 Serverboard Details
- 47 X5DPi-G2 Layout
- 47 X5DPi-G2 Quick Reference
- 47 Connector Definitions
- 47 ATX Power Connection
- 47 PWR_SEC Connection
- 47 Power LED
- 47 HDD LED
- 47 NIC1 LED
- 47 NIC2 LED
- 47 Overheat LED
- 47 Power Fail LED
- 47 Reset Button
- 47 Power Button
- 47 Universal Serial Bus
- 47 Extra USB Headers
- 47 Serial Ports
- 47 ATX PS/2 Keyboard & Mouse Ports
- 47 Fan Headers
- 47 LAN 1/2 (Ethernet Ports)
- 47 Wake-On-LAN
- 47 Wake-On-Ring
- 65 Keylock
- 65 Jumper Settings
- 65 Explanation of Jumpers
- 65 CMOS Clear
- 65 GLAN Enable/Disable
- 65 Front Side Bus Speed
- 65 VGA Enable/Disable
- 65 Chassis/Overheat Fan Select
- 65 Thermal Fan
- 65 PCI-X Bus Speed Settings
- 65 Watch Dog Enable/Disable
- 65 Speaker Enable/Disable
- 65 5-10 Onboard Indicators
- 65 LAN1/LAN2 LEDs
- 65 5-11 Parallel Port/Floppy/Hard Disk Drive Connections
- 65 Parallel Port Connector
- 65 Floppy Connector
- 65 IDE Connectors
- 65 5-12 Installing Software Dirvers
- 66 Static-Sensitive Devices
- 66 Control Panel
- 66 System Fans
- 66 System Fan Failure
- 66 Replacing System Cooling Fans
- 66 Drive Bay Installation/Removal
- 66 Accessing the Drive Bays
- 66 Hard Drive Installation
- 66 Installing a Component in the 5 1/4" Drive Bay
- 66 Power Supply
- 66 Power Supply Failure
- 66 Removing/Replacing the Power Supply
- 67 Introduction
- 67 Running Setup
- 67 Main BIOS Setup
- 67 The Main BIOS Setup Menu