Ernst Nagel Foldnak 40
Manuals and User Guides for Ernst Nagel Foldnak 40. We found 1 manuals for free downloads User manual
The Foldnak 40 bookletmaker is designed to produce high-quality booklets quickly and efficiently. It uses the Foldnak principle, which combines stapling and folding in one pass, ensuring accurate staple placement. The machine can operate in four modes: stapling and folding with Nagel staples 26/6, stapling and folding with Nagel loop staples Ri 26/6, folding without stapling, and corner stapling (optional). You can feed sets manually or automatically with a table top collator (optional). The Trimmer (optional) can press the finished booklets and press the fold, creating flat-laying booklets that meet high quality needs.
Key Features
Staples and folds in one pass
Four operation modes
Manual and automatic feeding
Optional trimmer for flat-laying booklets
High speed and efficiency
Accurate staple placement
High quality results
Pages: 16 Ernst Nagel Foldnak 40 User manual
Brand: Ernst Nagel Category: Grass trimmers Size: 696 KB
Languages: English
Open manualFrequently Answers and Questions
What are the different operation modes of the Foldnak 40?
The Foldnak 40 has four operation modes: stapling and folding with Nagel staples 26/6, stapling and folding with Nagel loop staples Ri 26/6, folding without stapling, and corner stapling (optional).
How do I refill the staples?
To refill the staples, draw the staple pusher backwards with your index finger below it. Then pull the cover and swing it open. Use only Nagel staples 26/6 or Ri 26/6. Close the cover, slide it forward below the pin, and push down to disengage and guide it towards the staples.
What is the maximum sheet thickness that can be stapled?
The Foldnak 40 can staple up to 2.5 mm (approximately 25 sheets 80g/m2).
Questions & Answers
G G Q
How is the photocell sensor for automatic stapling and folding adjusted?
To set up the photocell (A), loosen the knurled screw (B), push the photocell below the sheets until they are completely covered, then switch the power on (16). Slowly pull the photocell back until the machine fires, and then fix the knurled screw (B) in that position. This ensures the machine only fires when sheets are correctly fed and aligned.
How can the stapling and folding operation be performed manually?
To operate manually, unplug the photocell and use switch (17).
advertisement