529 Manuals

Multitech MTR-H5-B10-HZ

Manuals and User Guides for Multitech MTR-H5-B10-HZ. We found 4 manuals for free downloads User guide, User Guide

Below you will find brief information for 3G Modules. This guide covers the AT commands available for Telit's 3G modules, enabling you to configure and control various features, such as network registration, call management, SMS messaging, and GPRS data communication. With these commands, you can integrate your applications with the Telit modules to achieve seamless connectivity and data transfer.

Key Features

Call control and management
SMS messaging (sending and receiving)
GPRS data communication
Network registration and operator selection
Phonebook management
Clock and alarm management
SIM card management
Battery charger control
General configuration settings
Error reporting and debugging

MultiTech MTR-H5-B10-HZ Cellular Router Guide

Pages: 34 Multitech MTR-H5-B10-HZ User guide

Brand: Multitech Category: Routers Size: 1 MB

Languages: English

Open manual

Frequently Answers and Questions

What is the purpose of the AT commands?

AT commands are a set of text-based instructions used to configure and control Telit's 3G modules. They provide a standardized interface for communicating with the modules and accessing various functionalities.

How can I use AT commands to send an SMS message?

You can use the AT commands to send an SMS message by setting the message format, specifying the recipient's number, and sending the message contents.

What is GPRS and how can I utilize it with the Telit modules?

GPRS (General Packet Radio Service) is a wireless communication technology that allows for high speed data transfer over mobile networks. Telit modules provide various AT commands to manage GPRS connections, configure PDP contexts, and control data transfer settings.

Questions & Answers

A A A

How to determine the software version of the Telit module?

The $GPSSW command can be used. The output format varies depending on the module type. For example, modules with SE/SL868 will output a string like $GPSSW: GSD4e_4.0.2-P1 05/26/2010 146, while modules with SL869 will output a string like $GPSSW: SL869 v3.0.0.1 -STD -N96. This command is available in controlled mode only, and the GNSS module software version is available a few seconds after the first GNSS module startup.

What computer software is required to interact with the Telit module?

A terminal application, such as PuTTY or Tera Term, is needed to send AT commands to the module over a serial connection. The specific software used may depend on individual needs.