Omron CQM1H -SCB41

Manuals and User Guides for Omron CQM1H -SCB41. We found 1 manuals for free downloads Operation manual

Below you will find brief information for Serial Communications Board CQM1H CQM1H-SCB41. The CQM1H-SCB41 is an Inner Board for the CQM1H-series PCs that provides two serial communications ports for connecting host computers, Programmable Terminals (PTs), general-purpose external devices, and Programming Devices (excluding Programming Consoles). This makes it possible to easily increase the number of serial communications ports for a CQM1H-series PC. The Board supports protocol macros (which are not supported by the ports built into the CPU Units), allowing easy connection to general-purpose devices that have a serial port.

Key Features

  • Provides 2 serial comms ports

  • Supports protocol macros

  • Supports NT Links

  • Increases number of serial ports

  • Compatible with CQM1H-series PCs

  • Supports Host Link communications

  • Supports No-protocol communications

  • Supports 1:1 Data Links

  • Increases PC’s functionality

  • Easy to install and use

Pages: 437 Omron CQM1H -SCB41 Operation manual

Brand: Omron Category: Measuring, testing & control Size: 5 MB

Languages: English

Table of contents

Open manual

Frequently Answers and Questions

How do I connect the Serial Communications Board to a CQM1H CPU Unit?

The Serial Communications Board is installed in Inner Board slot 1 of a CQM1H-series CPU Unit. This is explained in detail in Section 2 of the manual, which covers board components and installation.

What types of devices can I connect to the Serial Communications Board?

You can connect a wide range of devices to the Serial Communications Board, including host computers, Programmable Terminals (PTs), general-purpose external devices, and Programming Devices (excluding Programming Consoles). The type of device you can connect depends on the communication mode you choose.

How do I configure the Serial Communications Board for use with a specific device?

You can configure the Serial Communications Board using various settings and control bits. These are described in detail in Section 3, which covers default settings and related bits/flags.

advertisement