1. manualzz.com
  2. computers & electronics
  3. networking

Parker L5351

Manuals and User Guides for Parker L5351. We found 2 manuals for free downloads Technical manual

Below you will find brief information for DeviceNet Communication Interface L5351. The L5351 DeviceNet LinkCard is designed to provide a communication link between a Link system and a DeviceNet network. The card is installed in a L5392 or L5300 LinkStation and provides a means of controlling and monitoring devices on the DeviceNet network. This card allows for up to 381 words of data to be transferred between the Link system and the DeviceNet network. The card can be configured with different baud rates and data types to meet the specific requirements of your application.

Key Features

  • Supports up to 381 words of data transfer

  • Configurable baud rates and data types

  • Provides communication link between Link system and DeviceNet network

  • Supports explicit messaging and polled I/O connections

  • Fragmentation supported for both polled I/O and explicit connections

Pages: 39 Parker L5351 Technical manual

Brand: Parker Category: Networking Size: 421 KB

Languages: English

Open manual

Other manuals and documents

39 Pages

Technical manual

Languages: English

Frequently Answers and Questions

What is the purpose of the L5351 DeviceNet LinkCard?

The L5351 DeviceNet LinkCard provides a communication link between a Link system and a DeviceNet network. This allows for the control and monitoring of devices on the DeviceNet network from the Link system.

What are the limitations on data transfer with the L5351 LinkCard?

The L5351 LinkCard can transfer a maximum of 381 words of data between the Link system and the DeviceNet network. The maximum number of words that can be transferred is limited by the number of L5351 LinkCards installed in the Link system (up to 3 cards per L5300 or L5392) and the capabilities of the PLC.

How do I configure the L5351 LinkCard?

The L5351 LinkCard is configured using the ConfigEd software. The configuration process involves defining the parameters for the card, such as the baud rate, the number of registers to be used, and the mapping of the registers to the PLC memory.

What are the different baud rates supported by the L5351 LinkCard?

The L5351 LinkCard supports baud rates of 125K, 250K, and 500Kbaud.

advertisement