STMicroelectronics NUCLEO-F411RE
Manuals and User Guides for STMicroelectronics NUCLEO-F411RE. We found 7 manuals for free downloads User manual
Below you will find brief information for STM32 Nucleo board NUCLEO-F030R8, STM32 Nucleo board NUCLEO-F072RB, STM32 Nucleo board NUCLEO-F103RB, STM32 Nucleo board NUCLEO-F302R8, STM32 Nucleo board NUCLEO-F401RE, STM32 Nucleo board NUCLEO-L152RE. These STM32 Nucleo boards are low-cost and easy-to-use development platforms which can be used to quickly evaluate and start a development with an STM32 microcontroller in LQFP64 package.
Key Features
Low-cost and easy-to-use development platform
Quickly evaluate and start a development
STM32 microcontroller in LQFP64 package
Supporting the STM32 families
ST-LINK/V2 installation and firmware package
IAR Embedded Workbench for ARM, MDK-ARM, TrueSTUDIO toolchains
Pages: 20 STMicroelectronics NUCLEO-F411RE User manual
Brand: STMicroelectronics Category: Development boards Size: 1 MB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
What are the minimum requirements to run and develop any firmware application on an STM32 Nucleo board?
The minimum requirements are: Windows PC (XP, Vista, 7, 8), 'USB type A to Mini-B' cable, used to power the board (through USB connector CN1) from host PC and connect to the embedded ST-LINK/V2 for debugging and programming.
What is the purpose of the ST-LINK/V2 embedded debug tool interface on the STM32 Nucleo board?
The ST-LINK/V2 embedded debug tool interface needs an ST-Link/V2 dedicated USB driver to be installed. This driver is available at ST web site and supported within software toolchains: IAR Embedded Workbench for ARM, MDK-ARM, Atollic TrueSTUDIO.
What software toolchains are supported by the STM32 Nucleo board?
The STM32 Nucleo boards are supported by a complete range of software tools. It encompasses traditional integrated development environment IDEs with C/C++ compilers and debuggers from major third-parties, completed with innovative tools from STMicroelectronics. The toolchains are EWARM v7.10.3 and later, MDK-ARM v5.01 and later, TrueSTUDIO v5 and later.
What is the difference between the template project and the example project in the STM32 Nucleo firmware package?
The template project is a pre-configured project with empty main function to be customized by the user. This is helpful to start creating your own application based on the peripherals drivers. The example project includes toolchain projects for each peripheral example ready to be run.
advertisement