STMicroelectronics STEVAL-ISC005V1
Manuals and User Guides for STMicroelectronics STEVAL-ISC005V1. We found 1 manuals for free downloads User manual
Below you will find brief information for STEVAL-ISC005V1, STUSB4500. The STEVAL-ISC005V1 evaluation board is a USB PD sink that negotiates with power sources to enable charging paths. It includes an L7985 for step-down conversion to a 5 V regulated output, powering MCUs or other systems. LEDs indicate power availability on four outputs. It's configured with three PDOs (5 V, 15 V, 20 V) customizable via GUI and complies with USB PD (rev3.0), offering short-to-VBUS protections and customizable start-up profiles.
Key Features
USB PD sink port with 3 PDOs
On-board 5 V DC-DC converter
Short-to-VBUS protection on CC and VBUS pins
Customizable start-up profiles
Compatible with NUCLEO-F072RB for configuration
Dead battery mode operation
Pages: 26 STMicroelectronics STEVAL-ISC005V1 User manual
Brand: STMicroelectronics Size: 4 MB
Languages: English
Open manualFrequently Answers and Questions
How are the PDOs configured on the STEVAL-ISC005V1?
The board is pre-configured with three PDOs: +5 V/1.5 A (low priority), +15 V/1.5 A (medium priority), and +20 V/1.0 A (high priority).
Can I customize the PDOs?
Yes, the PDOs can be easily customized using a graphical user interface (GUI).
How can I configure the STUSB4500?
The STUSB4500 can be configured via a computer GUI using the USB connector and a connected STM32 NUCLEO-F072RB as a USB to I²C bridge.
advertisement