STMicroelectronics STM8AF6248
Manuals and User Guides for STMicroelectronics STM8AF6248. We found 4 manuals for free downloads Data Sheet, Reference manual, Programming Manual
Below you will find brief information for STM8AF6223/26, STM8AF624x, STM8AF6266/68, STM8AF52xx, STM8AF6269/8x/Ax, STM8S001xx/STM8S003xx, STM8S005xx, STM8S007xx, STM8S103xx/STM8S903xx, STM8S105xx. These 8-bit microcontrollers offer various memory densities and peripherals for automotive and general-purpose applications. The STM8AF series is designed for automotive environments, while the STM8S series is designed for general use. Both support a range of features for diverse applications, including Flash memory and different packages and peripherals.
Key Features
STM8S and STM8AF series 8-bit microcontrollers
STM8AF series designed for automotive applications
STM8S series designed for general purpose applications
Flash memory for program and data storage
Available in different memory densities and packages
Comprehensive set of peripherals
Pages: 99 STMicroelectronics STM8AF6248 Data Sheet
Brand: STMicroelectronics Category: System components Size: 1 MB
Languages: English
Table of contents
Open manualOther manuals and documents
Frequently Answers and Questions
What is the purpose of the STM8AF series of microcontrollers?
The STM8AF series is designed for automotive applications requiring robust performance and specific peripherals.
What distinguishes the STM8S series from the STM8AF series?
The STM8S series is designed for general-purpose applications, while the STM8AF series is tailored for the automotive industry.
Where can I find detailed information about the pin descriptions and electrical characteristics?
Refer to the product datasheet for complete information on ordering, pin descriptions, mechanical and electrical characteristics, and available peripherals.
Questions & Answers
A A A
How to configure the STM8S003F3 USART for asynchronous communication at 9600 baud, 8 data bits, no parity, and 1 stop bit?
Set UART1_CR1.M to 0b00 (8 data bits), UART1_CR1.PCE to 0b0 (No Parity), and UART1_CR1.UE to 0b1 (USART enable). Set UART1_CR2.STOP to 0b0 (1 stop bit), UART1_CR2.TEN to 0b1 (Transmit enable), and UART1_CR2.REN to 0b1 (Receive enable).
How do I configure the TIM1 prescaler in timer mode?
Configure TIM1_CR1 (CEN and DIR bits), TIM1_ARR (Auto-Reload Register), and TIM1_PSC (Prescaler). The prescaler value determines the timer clock frequency: Timer Clock = fMASTER / (PSC + 1), where fMASTER is the system's master clock frequency.
How do I configure the ADC on the STM8S003F3?
Enable the ADC clock (CLK_PCKENR1), then configure ADC_CR1 (ADON, VREF, SCAN, CONT, EXTSEL) for enable, Vref source, scan mode, continuous conversion, and external event selection.
How can I perform analog comparisons on the STM8S003F3, given it lacks a dedicated comparator?
Use the ADC for digital comparison or configure GPIO pins with Schmitt trigger inputs for threshold-based triggering.
Should I use pull-up resistors on unused I/O pins?
Using pull-up resistors on unused I/O pins is recommended to prevent floating inputs and potential issues from static charges or noise.
How can I generate an analog output using the STM8S003F3, considering it does not have a DAC?
Use an external DAC or employ PWM signals from timers with filtering.
What interrupt sources are available on the STM8S003F3?
The STM8S003F3 features external interrupts (EXTI), timer interrupts (likely from TIM2, TIM3, or TIM5, including overflow and capture/compare interrupts), and watchdog timer interrupts (IWDG and WWDG, which trigger resets).
Describe the registers for the TIM2, TIM3, and TIM5 timers on the STM8S003F3.
Each timer (TIM2, TIM3, TIM5) includes registers such as CR1 (control register 1), CR2 (control register 2), SMCR (slave mode control register), CCMR1/CCMR2 (capture/compare mode registers), CCER (capture/compare enable register), CNT (counter register), and PSC (prescaler register). These registers control aspects like counter enable, counting mode, prescaler, and capture/compare modes.
What serial communication options are available on the STM8S003F3?
The STM8S003F3 uses SWIM for programming/debugging. Software-based serial communication or external serial modules interfaced through GPIO pins can be used.
W W F
How do I program a FLASH_DUKR register?
To program the FLASH_DUKR register: Write 0xAE followed by 0x56 in the FLASH_DUKR register (0x00 5064). Reset bit 3 (DUL) in the FLASH_IAPSR register (0x00 505F).
W W F
What is the procedure for programming the FLASH_DUKR register in STM8 Flash microcontrollers?
To program the FLASH_DUKR register, write 0xAE followed by 0x56 in the FLASH_DUKR register (0x00 5064). Then, reset bit 3 (DUL) in the FLASH_IAPSR register (0x00 505F). This procedure unlocks and configures the register, typically for programming the data EEPROM area.
advertisement