2388 Manuals

Simrad IS15

Manuals and User Guides for Simrad IS15. We found 3 manuals for free downloads Manual, Reference guide, Owner's manual

The Simrad IS15 is a NMEA repeater that can be used to display depth, speed, temperature, heading and GPS information. It can be connected to a Simrad XX33/34/44/54 Chart plotter/Echo sounder/NavStation or ‘X’ series autopilot. The IS15 can be used as a stand-alone NMEA repeater or in a daisy chain configuration with up to three instruments.

Key Features

NMEA Repeater
Displays depth, speed, temperature, heading, and GPS data
Connects to Simrad XX33/34/44/54 chart plotters
Connects to Simrad ‘X’ series autopilots
Can be used as a stand-alone repeater or in a daisy chain configuration
Supports up to three instruments in a daisy chain

Pages: 28 Simrad IS15 Manual

Brand: Simrad Category: Motor vehicle electronics Size: 304 KB

Languages: English

Open manual

Frequently Answers and Questions

What is the IS15 used for?

The IS15 is a NMEA repeater that can be used to display depth, speed, temperature, heading and GPS information, it can be connected to a Simrad XX33/34/44/54 Chart plotter/Echo sounder/NavStation or ‘X’ series autopilot.

How many IS15 instruments can be connected in a daisy chain?

You can connect up to three IS15 instruments in a daisy chain.

What type of NMEA sentences does the IS15 support?

The IS15 supports the following NMEA sentences: APA, APB, BOD, BWC, BWR, BWW, DBK, DBT, DPT, GGA, GLL, HDG, HDM, HDT, HSC, MTW, MWV, RMA, RMB, RMC, RSA, VHW, VTG, VWR, XTE, XTR, ZTG, ZDA.

What is the maximum cable length for the Roblink connection?

The maximum cable length for the Roblink connection is 30 meters (100 feet).

How do I calibrate the compass?

To calibrate the compass you need to begin rotating your boat to starboard and press and hold the button for 2 seconds, the display should read 'CAL' when calibration is completed it should read 'Done', but remember that you can’t calibrate when IS15 is connected to a Simrad autopilot.