Swegon CDDb

Инструкции и руководства для Swegon CDDb. Мы нашли 11 инструкции доступные для бесплатного скачивания Instructions, Owner's manual, User manual

Swegon CDDb is a high-quality air diffuser that is designed to provide optimal airflow control in a variety of applications. It is constructed from durable materials and is available in a range of sizes to meet the needs of any space. The CDDb is easy to install and can be used in both supply and exhaust applications. It is also equipped with a variety of features that make it ideal for use in critical environments, such as hospitals and cleanrooms.

Ключевые особенности

  • Rated coefficient of performance (K-factor) is specified on the identification label of the product.

  • Removable commissioning damper, fixed measurement tapping and sound absorbent insulation covered by a reinforced surface layer.

  • Sector blanking-off panel for blanking off a sector of the air distribution pattern.

  • Accuracy of ± 10% of the flow for straight duct before the commissioning box.

Страниц: 2 Swegon CDDb Instructions

Бренд: Swegon Категория: Climate control Размер: 753 KB

Языки: English

Открыть мануал

Другие мануалы и документы

2 Страниц

Instructions

Языки: English

2 Страниц

Owner's manual

Языки: German

2 Страниц

Owner's manual

Языки: Swedish

2 Страниц

Owner's manual

Языки: Finnish

2 Страниц

Owner's manual

Языки: German

2 Страниц

Owner's manual

Языки: Swedish

2 Страниц

Owner's manual

Языки: Finnish

2 Страниц

Owner's manual

Языки: German

2 Страниц

Owner's manual

Языки: Russian

39 Страниц

User manual

Языки: Estonian

Часто задаваемые вопросы

What is the K-factor of the Swegon CDDb?

The K-factor of the Swegon CDDb is specified on the identification label of the product and in the relevant commissioning instructions at www.swegon.com.

How do I install the Swegon CDDb?

The Swegon CDDb can be installed suspended or against the ceiling. If suspended, the diffuser inlet sleeve must be secured to the connecting duct using blind rivets. If installed against the ceiling, the diffuser can be secured with screws through its backing box, if the building material has sufficient strength.

How do I commission the Swegon CDDb?

Commissioning must be carried out with the diffuser face mounted. Pull the measuring tubes and damper adjustment cords out through the air diffuser slot. Then connect the manometer to the correct measuring tube. The red tube in the ALS commissioning box is used for supply air.

реклама