Trane PTHF
Manuals and User Guides for Trane PTHF. We found 1 manuals for free downloads Manual
Below you will find brief information for PTEF PTEF0702GAA, PTHF PTHF0702GAA. These Trane ProSpace PTAC units offer quiet operation, intelligent self-checking control, and features like freeze protection and random compressor restart to prolong unit life. They are designed for through-the-wall installation and include memory to retain settings after power loss.
Key Features
Quiet operation
Intelligent self-checking control
Freeze protection
Random compressor restart
Memory function
Through-the-wall installation
Pages: 32 Trane PTHF Manual
Brand: Trane Category: Split-system air conditioners Size: 1 MB
Languages: English
Table of contents
Open manualFrequently Answers and Questions
How do I access the keypad configuration screen?
Power up the unit and within 30 seconds, press and hold both the fan speed + buttons for five (5) seconds.
What does the STATUS LED indicator indicate?
A steadily lit STATUS LED indicates normal operation. Flashing indicates a diagnostic code; refer to the manual for details.
What happens if the room temperature falls below 40°F?
If freeze protection is enabled, the fan and electric heater will turn on to warm the room to 50°F.
Can I use a wall thermostat with this unit?
Yes, but the unit must be configured for wall thermostat enable, and the keypad will be disabled.
Questions & Answers
A A A
Is it okay to operate the unit without filters?
It is important to not operate the unit without filters in place. If a filter becomes torn or damaged, it should be replaced immediately. Operating without filters in place or with damaged filters will allow dirt and dust to reach the indoor coil and reduce cooling, heating, airflow, and the efficiency of the unit. Airflow restriction may cause damage to the unit.
Why is it important to keep the filter clean?
Keeping the filter clean decreases the cost of operation, saves energy, prevents a clogged indoor coil and reduces the risk of premature component failure.
How often should the filters be changed or cleaned?
To maintain unit efficiency, clean the filters of the ProSpace unit at least every 30 days (or sooner depending on application).
advertisement