Trane RTHD
Manuals and User Guides for Trane RTHD. We found 6 manuals for free downloads Installation, Use and Maintenance Manual, Troubleshooting guide, User manual, installation Guide
Below you will find brief information for Series R RTHD. This document will guide you through installation, operation, and maintenance procedures for your new Series R RTHD Helical Rotary Liquid Chiller. The Series R RTHD chiller is a single compressor, helical-rotary type, water-cooled liquid chiller designed for installation indoors. Each unit is a completely assembled, hermetic package that is factory-piped, wired, leak-tested, dehydrated, charged (optional), and tested for proper control operation before shipment.
Key Features
Single compressor
Helical-rotary type
Water-cooled
Indoor installation
Factory-piped, wired and tested
Optional factory refrigerant charge
Complete unit assembly
Pages: 184 Trane RTHD Installation, Use and Maintenance Manual
Brand: Trane Category: Power conditioning Size: 5 MB
Languages: English
Open manualOther manuals and documents
Frequently Answers and Questions
What is the refrigerant type used in the Series R RTHD chiller?
The refrigerant type is HFC-134a.
How much refrigerant is required for a Series R RTHD chiller?
Refer to Table 3 or Table 4 for the correct refrigerant charge based on the unit designator.
What are the operating weight and shipping weight for a Series R RTHD chiller?
The operating weight and shipping weight vary depending on the unit's designator. Refer to Table 3 or Table 4 for specific information.
Where should I locate the Series R RTHD chiller?
Locate the unit indoors, away from sound-sensitive areas and on a rigid, non-warping mounting pad or concrete foundation. Ensure proper clearance for water piping and electrical connections.
What are the minimum and maximum flow rates for the evaporator and condenser water?
Refer to Table 3, Table 4, Table 5 or Table 6 for specific information on flow rates based on the unit designator.
Questions & Answers
A A A
What can cause a transition failure during the Y-Delta start sequence of an RTAC chiller?
A transition failure can occur if the transition complete input is not verified to be open before the "Short" contact closes. This will generate a MMR diagnostic.
How can the transition complete contact within an RTAC chiller be tested?
The transition complete contact can be tested by ensuring it closes and opens the 1K4 de-energizing resistors.
advertisement