motorola

Portable Bluetooth

®

Hands-Free Speaker

BEFORE YOU

BEGIN

Before using this product, read the Important Safety and

Legal Information pamphlet and follow its instructions.

Take a moment before you get started to familiarize yourself with your new

T305 Portable Bluetooth Hands-Free Speaker.

Speaker

Multi-Color

Indicator Light and Call Button

Volume

Up (+)

Button

(on side)

Volume

Down (-)

Button

Power

Button

Microphone

T305 Get connected in 4 quick steps.

1

CHARGE YOUR

HANDS-FREE SPEAKER

Charge your hands-free speaker's battery for

2 hours:

Charging

Port

1

Note: Do not place hands-free speaker with clip installed on visor when charging.

Plug the Motorola charger into the charging port on the end of the hands-free speaker.

The indicator light turns steadily red when the battery is charging and the hands-free speaker is turned off. It may take up to 1 minute for the indicator light to turn on. When the hands-free speaker's battery is fully charged (about 2 hours), the indicator light turns steadily blue.

2 Disconnect the charger.

Note: Hands-free speaker is functional while charging; however, when charging the hands-free speaker while turned on, the indicator light does not provide charging status.

d

2

START BLUETOOTH

FEATURE

Your Phone

Your phone's Bluetooth feature is off by default.

To use your hands-free speaker, you must turn on the Bluetooth feature in your phone.

For most Motorola phones (at the main menu):

1

M Menu

)

> Settings > Connection >

Bluetooth Link > Setup.

2 Scroll to Power.

3

Select Change.

4 Scroll to On.

5 Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.

Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.

3

PAIR

Your Hands-Free Speaker

Before you can use your hands-free speaker, you must pair (link) it with your phone.

Step A - ENSURE HANDS-FREE SPEAKER IS

IN PAIRING MODE

To initiate easy pairing, power on hands-free speaker by pressing and holding the Power button until the indicator light becomes steadily lit in purple. Release the button and, after a few moments, the indicator light will be steadily lit in blue to indicate hands-free speaker is in pairing mode.

Indicator Light

(steadily blue for pairing mode)

If the hands-free speaker does not enter pairing mode, see TROUBLESHOOTING for help.

4

5

2

3

1

3

PAIR

CONTINUED

Your Phone

Step B - SET YOUR PHONE TO LOOK FOR

YOUR HANDS-FREE SPEAKER

For most Motorola phones:

M

Menu

)

>

Settings > Connection > Bluetooth Link >

Handsfree > Look for Devices.

The phone lists Bluetooth devices it finds.

Select Motorola T305.

Select OK or Yes to pair your hands-free speaker with your phone.

Enter the passkey: 0000

Select OK.

When your hands-free speaker successfully pairs with your phone, the indicator light changes to flashing blue with quick purple flashes.

Note: These steps are for most Motorola phones.

For other phones, see your phone's user's guide.

Motorola, Inc.

Consumer Advocacy Office

1307 East Algonquin Road

Schaumburg, IL 60196 www.hellomoto.com

1-877-MOTOBLU

1-888-390-6456 (TTY/TDD United States for hearing impaired)

Guide Number: 6809503A47-A

MOTOROLA and the Stylized M Logo are registered in the US

Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas.

Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners.

© Motorola, Inc. 2006.

4

TEST AND USE

Your phone and hands-free speaker are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:

1 Install visor clip and place hands-free speaker onto your visor. See "Installing Hands-Free

Speaker in Car" on the reverse side of this guide for details.

2 On your phone, dial the number you want to call and press the Send key.

3 If your phone and hands-free speaker are successfully paired, you will hear ringing on the hands-free speaker.

After you have successfully paired your phone and hands-free speaker, you don't need to repeat these steps. For daily use, ensure that your hands-free speaker is turned ON and that your phone's Bluetooth feature is ON.

To save battery power, your hands-free speaker will power down when not connected to your phone for more than 30 minutes.

USING YOUR T305

See

Features and

Functions Guide on the reverse side for information on using your T305

Features and

Functions Guide

T305

Portable Bluetooth®

Hands-Free Speaker

IMPORTANT:

Be sure to first follow the

Quick Start Guide on the reverse side of this guide to complete initial setup of your T305.

TROUBLESHOOTING

My hands-free speaker will not enter pairing mode.

Make sure that any devices previously paired with the hands-free speaker are turned off. If the indicator light is flashing in blue, turn off the other device and wait for 10 seconds. The indicator light becomes steadily lit in blue indicating the hands-free speaker is now in pairing mode.

My phone does not find my hands-free speaker.

Make sure the indicator light on your hands-free speaker is on and steadily lit in blue when your phone is searching for devices (see step 3).

My hands-free speaker worked with my phone before but now they are not working.

Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the

Bluetooth feature (see step 2) and pair your phone and hands-free speaker again (see step 3).

Support.

If you need more help, contact us at

1-877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport

TURNING HANDS-FREE

SPEAKER ON AND OFF

To turn hands-free speaker on, press and hold the Power button until the indicator light turns purple. Then, release the button.

Note: Hands-free speaker may take up to 3 to 4 seconds to turn on.

To turn your hands-free speaker off, press and hold the Power button until the indicator light turns purple and then turns off.

To conserve battery power, your hands-free speaker will turn off when not connected to your phone for more than 30 minutes.

Power Button

Indicator Light

INSTALLING HANDS-FREE

SPEAKER IN YOUR CAR

Follow these steps to install your hands-free speaker in your car:

1 Slide the visor clip onto the mounting bracket on the bottom of the hands-free speaker. To do this, place the loop end first onto the hands-free speaker and slide forward as shown below.

INSTALLING HANDS-FREE

SPEAKER IN YOUR CAR

Continued

2 Slide the visor clip onto your sun visor.

ADJUSTING HANDS-FREE

SPEAKER VOLUME

You can adjust hands-free speaker volume using the Volume buttons. To adjust volume, tap or press and hold button.

Volume

Up (+)

Button

Volume

Down (-)

Button

When installed, the Power button must be facing toward you as shown.

The visor clip is reversible to allow placement of your hands-free speaker on either the front or the back of your car’s sun visor.

European Union Directives

Conformance Statement

Hereby, Motorola declares that this product is in compliance with:

• The essential requirements and

other relevant provisions of Directive

1999/5/EC.

• All other relevant EU Directives.

0168

Product

Approval

Number

The above gives an example of a typical Product

Approval Number.

You can view your product’s Declaration of Conformity

(DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.

Note: Hands-free speaker volume cannot be adjusted during an incoming call.

MAKING CALLS

Function Action

Make a voice dial call Tap the Call button

End a call Tap the Call button

(if a call is on hold, tap twice to end all

calls)

Receive a call

Reject a call

Redial last call

Tap the Call button

Tap either Volume button

Press and hold the

Call button until you

Note: Your T305 supports both Handsfree and Headset

Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.

INDICATOR LIGHTS

With the Charger Plugged In

Indicator Light Status

Note: Charging status not displayed when hands-free speaker is in use.

Steady red

Steady blue

Charging

Charging complete

With No Charger Plugged In

Indicator Light Status

Off Power off

Steady purple Powering up

Steady blue Pairing mode

Quick red flash Battery low

Blue with quick Pairing successful purple flashes

Slow blue pulse Connected (on a call)

Blue flash Standby (not on call)

Quick blue flash Incoming call

Slow purple pulse Muted

MAKING CALLS

CONTINUED

Function Action

Answer a second incoming call

Press and hold the

Call button (places

Toggle between two active calls

Press and hold the Call button

Mute or unmute a call Tap both Volume

buttons

Note: Some features are phone/network dependent.

Note: When turning on your hands-free speaker during a phone call, audio is transferred automatically to your hands-free speaker (when your hands-free speaker and phone have previously been connected, and your phone supports this feature).

AUDIO TONES

The audio tones provide information about your hands-free speaker status.

Audio Tone

Five rapid high tones repeated every 60 sec.

Status

Single high tone when Volume at minimum pressing Volume button or maximum

Low battery

Out of range No audio indications; deteriorating quality

Ring tone

Single high tone

Incoming call

Pairing confirmation

Single low tone

Dual high/low tone

(phone dependent)

Single high tone

Low to high tone

Voice activation

Voice tag not recognized

End call

Phone network

Two ascending tones Mute enabled

Two descending tones Mute disabled