DAP Technologies MT1010 User`s manual

2.0MP

Rugged Tablet Computer

User's Manual

MT1010

Toll Free : +1 (855) DAP-TECH (327-8324) www.daptech.com

United States

8945 South Harl Avenue, Suite 112

Tempe, Arizona, 85284 USA

Phone: +1 (855) DAP-TECH

2915 Premiere Parkway, Suite 300

Duluth, Georgia, 30097 USA


Canada

4535 Wilfrid Hamel Blvd., Suite 100

Quebec City, QC Canada G1P 2J7

Toll Free: +1 (800) 363-1993

Phone: +1 (418) 681-9394

Fax: +1 (418) 681-0799

Europe, Middle East, Africa

9 The Chambers, Vineyard

Abingdon UK OX14 3PX

Phone: +44 (0) 1235 462130

Fax: +44 (0) 1235 462131

Copyright © 2014 DAP Technologies. All rights reserved.

No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the written permission of DAP Technologies.

TRADEMARKS

All product names, trademarks or logos mentioned herein are the properties of their respective owners.

Microsoft, Windows, and the Windows logo are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to

OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

All other brand and product names are trademarks or registered trademarks of their respective owners.

NOTE:

Display images shown may vary slightly from actual display. Information in this manual is subject to change without notice.

DISCLAIMER

DAP Technologies reserves the right to make any product changes without notice, including circuits and/or software described or contained in this manual in order to improved design and/or performance.

DAP Technologies assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask are for illustration purposes only. DAP Technologies makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.

WARRANTY

DAP Technologies warrants that each of its products is free from material and workmanship defect for a period of one year starting from the invoice date. If the customer discovers a defect, DAP

Technologies will, at its option, repair or replace the defective product at no charge to the customer, provided it is returned during the warranty period, with transportation charges prepaid. The returned product must be properly packaged in its original packaging to obtain warranty service.

Contents

Preface...................................................................................................v

Notational Conventions ....................................................................vi

Getting Started ....................................................................................1-1

Unpacking ........................................................................................1-2

Optional Items ...........................................................................1-2

Device Overview ..............................................................................1-3

Front View .................................................................................1-3

Rear View (Standard Model) ....................................................1-5

Rear View (Expanded Model) ...................................................1-7

Top and Bottom View ................................................................1-9

Left and Right Views .................................................................1-10

Installing the Stylus ..........................................................................1-11

Removing the Stylus .................................................................1-11

Installing the Memory Card ..............................................................1-12

Removing the Memory Card .....................................................1-12

Installing the SIM Card .....................................................................1-13

Installing the Battery Pack ................................................................1-14

Connecting to Network .....................................................................1-15

Connecting to AC Power ..................................................................1-16

Turning the Tablet Computer On and Off .........................................1-17

Turning On ................................................................................1-17

Turning Off ................................................................................1-18

DAP Technologies i

Operating Your Tablet

Computer .............................................................................................2-1

Using the Touch Screen ...................................................................2-2

Calibrating the Screen ..............................................................2-3

Using the Input Panel .......................................................................2-4

Opening the Input Panel ...........................................................2-5

Managing the Input Panel .........................................................2-5

Using the Panel Keys .......................................................................2-6

Adjusting Volume ......................................................................2-6

Adjusting Screen Brightness .....................................................2-6

Using Wireless LAN .........................................................................2-7

Turning the Wireless Antenna On and Off ................................2-7

Connecting to a Wireless Network ............................................2-9

Using Bluetooth ................................................................................2-10

Turning the Bluetooth Adapter On and Off ................................2-10

Pairing with Bluetooth Devices .................................................2-11

Configuring Bluetooth Settings .................................................2-14

Using 3G Network ............................................................................2-15

Connecting to 3G Network ........................................................2-15

Using AirCard ® Watcher ............................................................2-16

Configuring AirCard ® Watcher Settings .....................................2-18

Using GPS ........................................................................................2-20

Location ....................................................................................2-20

Assistance ................................................................................2-21

Using the Camera ............................................................................2-22

Opening the Camera ................................................................2-22

The Camera Screen .................................................................2-23

Shooting Photos .......................................................................2-24

Camera Settings .......................................................................2-25

Using the Barcode Reader ...............................................................2-29

Using ScannerManager ............................................................2-30

Working With Bluetooth Scanners ............................................2-33

Using the Fingerprint Reader ...........................................................2-34

Using AuthenTec TrueSuite ......................................................2-34

Setting Up Your Fingerprints .....................................................2-34

ii DAP Technologies

Removing an Enrolled Fingerprint ............................................2-38

Log On to Windows by Fingerprints ..........................................2-40

Using the DAP Control Center .........................................................2-41

Opening the DAP Control Center .............................................2-41

Viewing System Information .....................................................2-42

Defining Hotkeys .......................................................................2-44

Connecting Your Tablet Computer ....................................................3-1

Connecting USB Devices .................................................................3-2

USB Port Connection ................................................................3-2

Mini USB Port Connection ........................................................3-2

Connecting HDMI Devices ...............................................................3-3

Connecting Audio Devices ...............................................................3-4

Connecting Serial Devices ...............................................................3-5

Managing Power .................................................................................4-1

Battery Pack .....................................................................................4-2

Charging the Battery Pack ........................................................4-2

Checking the Battery Level .......................................................4-3

Replacing the Battery Pack ......................................................4-4

Power Management .........................................................................4-5

Power Saving Tips ............................................................................4-5

Expanding Your Tablet Computer .....................................................5-1

Connecting the Docking Station .......................................................5-2

Docking the Tablet Computer ...................................................5-2

Installing the Expansion Module .......................................................5-3

Installing the Extendable Battery Pack .............................................5-4

Checking the Battery Level .......................................................5-5

Using BIOS Setup and System Recovery ........................................6-1

BIOS Setup ......................................................................................6-2

When to Use .............................................................................6-2

Starting BIOS Setup Utility ........................................................6-2

How to Use ...............................................................................6-3

BIOS Menu ...............................................................................6-4

DAP Technologies iii

Maintenance, Troubleshooting and Specifications .........................A-1

Taking Care of the Tablet Computer .................................................A-2

Location Guidelines ..................................................................A-2

General Guidelines ...................................................................A-2

Cleaning Guidelines ..................................................................A-2

Touchscreen Guidelines ...........................................................A-2

Troubleshooting ................................................................................A-3

Tablet Computer Specifications ........................................................A-5

Regulatory Information ......................................................................B-1

Important Information .......................................................................B-2

Safety Information (EN) ............................................................B-3

Informations de sécurité (FR) ...................................................B-4

About the Batteries ...................................................................B-5

About the Adapter ....................................................................B-5

FCC Regulations ..............................................................................B-6

CE Notice (European Union) ............................................................B-7

RF Exposure Information (SAR) ......................................................B-7

IC Regulations ..................................................................................B-7

Important Note ..........................................................................B-8

iv DAP Technologies

Preface

This manual contains information that will help you operate this rugged

Tablet Computer. It is divided into six chapters and two appendices.

• Chapter 1: Getting Started, takes you through the process of setting up your Tablet Computer and identifying its external components.

• Chapter 2: Operating Your Tablet Computer, tells you how to use the

Tablet Computer’s components and features.

• Chapter 3: Connecting Your Tablet Computer, provides information on installing and using peripheral devices.

• Chapter 4: Managing Power, provides information on power management.

• Chapter 5: Expanding Your Tablet Computer, provides information on installing and using optional accessories, such as docking stations, expansion modules, etc.

• Chapter 6: Using BIOS Setup and System Recovery, describes the

BIOS Setup utility that configures the Tablet Computer’s BIOS settings and system recovery utility that reinstalls Windows to the Tablet Computer.

• Appendix A, provides technical specifications and information on caring for your Tablet Computer, and gives solutions to common problems you may encounter when using the Tablet Computer.

• Appendix B, provides regulatory information and safety notices on your

Tablet Computer.

DAP Technologies v

Notational Conventions

Throughout this manual, the following conventions are used to distinguish elements of text.

NOTE: Identifies additional information that requires special attention.

CAUTION: Identifies important information that, if not followed, may result in loss of data or damage to the Tablet Computer..

Hardware and keyboard keys are shown in a bold typeset. For example:

Press the F1 key to complete.

A title, command, setup item, value, option, or button that you can see on the screen is shown in boldface. For example:

Select When I press the power button, set it to Shut down, and then tap the Save changes button.

vi DAP Technologies

CHAPTER

1

Getting Started

Congratulations on purchasing this rugged Tablet Computer. The rugged design allows you to use it in harsh outdoor environments. You can use it under blazing heat, subzero cold, driving rain or dusty surroundings – places you could not take a consumer-grade Tablet Computer.

This chapter tells you step by step how to get the Tablet Computer up and running. You will find instructions for the following procedures:

• Unpacking

• Device Overview (An Explanation of External Components and their

Functions)

• Installing the Stylus

• Installing the Memory Card

• Installing the SIM Card

• Installing Battery Packs and Connecting to AC Power

• Turning the Tablet Computer On and Off

Getting Started DAP Technologies 1-1

Unpacking

After unpacking the shipping carton, you should find these standard items.

Inspect all items. If any item is damaged or missing, notify your dealer immediately.

√ Tablet Computer √ Battery Pack

2.0MP

√ Power Adapter √ Power Cord and Plugs

√ Stylus √ Tether for Stylus

√ Cleaning Cloth

√ Screen Protector Film

√ Windows 7 Certificate of Authenticity Label (COA)

√ Quick Start Guide

Keep the shipping carton and packaging materials in case you need to ship or store the Tablet Computer in the future.

NOTE: Actual items may slightly differ depending on the model you purchased.

Optional Items

√ Expansion Module √ High Capacity Battery Pack

1-2 DAP Technologies Getting Started

Device Overview

Front View

3

4

5

1

2

2.0MP

No.

Item

2 Web Camera

3 Up Key

4 Down Key

LED Indicators

5

Thermal

Wireless

Battery

Getting Started

6

Description

Press to activate the barcode scanner located on the top left corner of the Tablet Computer.

Use for video chatting and other interactive applications.

7

8

9

10

11

Shows the current status of the Tablet

Computer.

Lights up when the Tablet Computer heater is on.

• Solid green: Wireless antenna is enabled.

• Off: Wireless antenna is disabled.

• Blinking green: Battery is charging

• Solid greeen: Battery is fully charged.

• Blinking red: Battery power is low.

DAP Technologies 1-3

No.

5 Power

Item

6 Ambient Light Sensor

7 Microphone

8 Touch Screen

9 Left Key

10 Right Key

Description

• Solid green: Tablet computer is turned on

• Blinking green: Tablet computer is in sleep mode.

• Off: Tablet computer is turned off.

Adjusts the screen brightness according to the current ambient light.

Use for chatting and other interactive applications.

Displays and receives information for the

Tablet Computer.

Scans fingerprints for security or verification purposes.


Rear View (Standard Model)

1 2 3 4

5

6

7

No.

1 Speaker

Item

2 Camera Flash

3 CMOS Camera

4 Expansion Port

5 Battery Lock

6 Battery Latch

7 Battery Pack

8 9

Description

Sends out sound and voice from your Tablet

Computer.

Provides flash lighting for use with the camera.

Allows you to use the camera features.

Connects to expansion modules, such as an

RFID Reader, Smart Card Reader, etc.

Note: Expansion modules are optional items and are sold separately.

• Slide up to unlock the battery latch.

• Slide down to lock the battery latch.

• Slide inward to latch the battery pack to the

Tablet Computer.

• Slide outward to unlatch the battery pack from the Tablet Computer.

Supplies power to your Tablet Computer when external power is not connected.


5

6

No.

Item

8 Battery Button

Battery Status LEDs

9

Description

Press the button to light the battery status

LEDs. The LEDs automatically go off after 5 seconds.

Shows the battery capacity.

Battery full

Battery charged

Battery half charged

Battery low


Rear View (Expanded Model)

1 2 3 4

5

7

8

No.

Item

1 Expansion Module

2 Camera Flash

3 CMOS Camera

9 10

Description

Provides additional features for the Tablet

Computer.

Provides flash lighting for use with the camera.

Allows you to use the camera features.

4 Expansion Module

Screw

5 SIM Card Slot

6 Smart Card Reader

7 Battery Screws

8

High Capacity

Battery Pack

9 Battery Button

Secures the expansion module to the Tablet

Computer.

Stores a SIM card which provides data network capability to the Tablet Computer.

Reads smart cards.

Secures the high capacity battery pack to the

Tablet Computer.

Supplies power to your Tablet Computer when external power is not connected.

Press the button to light the battery status

LEDs. The LEDs automatically go off after 5 seconds.


6

7

No.

Item

10 Battery Status LEDs

Description

Shows the battery capacity.

Battery full

Battery charged

Battery half charged

Battery low


Top and Bottom View

1 2

Top View

Bottom View

3

4

No.

Item

1 Audio Connector

2 Antenna

3 Barcode Reader

4 Memory Card Slot

5 Docking Connector

6 Stylus Holder

7 Stylus

5 6

Description

Connects to a set of headphones, external speakers, or an audio recording device.

Receives and transmits wireless signals.

Reads barcodes.

Stores the microSD card for additional storage.

Connects to a docking station (optional).

Stores the stylus.

Pull to release the stylus from the holder.

7


Left and Right Views

Left View

1

2

3

Right View

5

6

7

4

No.

Item

1 Kensington Lock

2 Power Button

USB Port

3

4

Mini USB Port

HDMI Connector

(Type D)

Power

Connector

5 SIM Card Slot

6 Ethernet Port

7 RS232 Port

1-10 DAP Technologies

Description

Provides lock mechanism security.

• Short press to enable sleep mode.

• Long press to turn the Tablet Computer off.

Connects to a USB device, such as a USB flash drive, mouse, printer, keyboard, etc.

Connects to a USB device, such as a computer, printer, scanner, etc.

Connects to an HDMI device such as an external monitor.

Connects to the AC adapter.

Stores the SIM card which provides 3G data connection to your Tablet Computer.

Connects to a LAN jack for network connection.

Connects to a serial device, such as a scanner, printer, etc.

Getting Started

Installing the Stylus

Your Tablet Computer comes with a stylus for use with the touch screen.

The stylus holder at the bottom of the Tablet Computer provides a convenient place to store the stylus.

Perform the following to prepare and install the stylus to your Tablet Computer:

1. Loop one end of the tether to the stylus eyelet.

2. Loop the other end of the tether to the Tablet Computer eyelet.

2

3. Insert the stylus into the stylus holder until it locks into place.

1

Removing the Stylus

1. Pull the stylus by its tab to remove it from the stylus holder.

2. Before usage, expand the stylus.


Installing the Memory Card

The Tablet Computer has a memory card slot that supports file transfer and provides additional storage space for the Tablet Computer.

Perform the following to install a microSD card to your Tablet Computer:

1. On the right side of the Tablet Computer, open the memory card slot cover.

2. Insert the microSD card with the gold contacts facing down.

3. Push the microSD card until it clicks into place.

4. Close the microSD card slot cover.

Removing the Memory Card

1. Perform Windows procedures on safely removing removable drives from the Tablet Computer.

2. On the right side of the Tablet Computer, open the memory card slot cover.

3. Push the microSD card to eject it from the slot.

4. Pull to remove the microSD card.


Installing the SIM Card

The Tablet Computer supports data connection using 3G SIM cards.

Perform the following to install the SIM card to your Tablet Computer:

1. Make sure the Tablet Computer is turned off.

2. On the bottom side of the Tablet Computer, open the SIM card slot cover.

3. Insert the SIM card with the cut-off corner side first and the gold contacts facing the front of the device.

4. Push the SIM card until it clicks into place.

NOTE:

• For more information on connecting to 3G network, see “Using 3G Network” on page

2-15.

• To ensure signal connection, make sure to turn the Tablet Computer on or off before installing and removing the SIM card.

Removing the SIM Card

1. Turn the Tablet Computer off (see “Turning the Tablet Computer On and

Off” on page 1-17).

2. On the bottom side of the Tablet Computer, open the SIM card slot cover.

3. Push the SIM card to eject it from the slot.

4. Pull to remove the SIM card.


Installing the Battery Pack

Perform the following to install the battery pack to the Tablet Computer.

1. Place the Tablet Computer face down on a flat even surface.

2. From the bottom side of the battery pack, align and place the battery pack on its bay.

3. Slide the battery latches inward to the “ close” position (A).

4. For a more secured installation, slide the battery locks to the lock ( ) position (B).

B

A


Connecting to Network

The Tablet Computer can connect to a local area network or the Internet via

wired or wireless connection (see “Using Wireless LAN” on page 2-7).

To connect the Tablet Computer via wired connection, perform the steps below:

1. On the right side of the Tablet Computer, open the network port cover.

2. Connect one end of an Ethernet cable to the Ethernet port of the Tablet

Computer.

3. Connect the other end to a wall socket or a network hub.

Network


Connecting to AC Power

The Tablet Computer operates either on the external AC power or internal battery power. It is recommended to use AC power when you start up the Tablet

Computer for the first time.

CAUTION: Use only the AC adapter included with your Tablet Computer. Using other AC adapters may damage the Tablet Computer.

Perform the following to connect the Tablet Computer to AC power:

1. On the left side of the Tablet Computer, open the power connector cover.

2. With the battery pack installed, plug the DC cord of the AC adapter into the power connector of the Tablet Computer.

3. Plug the female end of the AC power cord into the AC adapter.

4. Then plug the male end of the AC power cord into an electrical outlet.

3

1

2

When the AC adapter is connected, the battery pack is charging. The battery LED indicator ( ) shows shows three different states:

• Blinking green: Battery is charging

• Solid greeen: Battery is fully charged.

• Blinking red: Battery power is low.


CAUTION:

• When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the Tablet Computer. A reverse procedure may damage the AC adapter or the Tablet Computer.

• When unplugging the connector, always hold the plug head. Never pull on the cord.

Turning the Tablet Computer On and Off

Turning On

1. Make sure that the Tablet Computer is either connected to TouAC power or the battery pack is charged.

2. Press the power button ( ). Notice the screen remains blank for 8 ~ 10 seconds but the power LED lights up.

The power LED indicator ( ) shows two different states:

• Solid green: Tablet computer is turned on

• Blinking green: Tablet computer is in sleep mode.

• Off: Tablet computer is turned off.


Turning Off

To turn off the Tablet Computer, use the “ Shut Down” command of your operating system.

CAUTION: Wait for at least five seconds after turning off the Tablet Computer before turning it back on.

When you finish a working session, you can stop the Tablet Computer by shutting it down or leaving the Tablet Computer in Sleep or Hibernation mode:

To stop in this mode...

Off

Do this...

Use the Windows Start Menu and follow the shut down procedure.

You can force the Tablet Computer to turn off by pressing and holding the power button ( ) for more than 6 seconds. This is not the recommended method, but may be necessary if the system is locked up.

Hybrid Sleep Short press the power button ( ) or use the Windows Start

Menu to put the Tablet Computer in Hybrid Sleep mode.

Hibernation Use the Windows Start Menu to put the Tablet Computer in hibernation mode.

Press the power button ( ) to resume or turn on the Tablet Computer from any of these modes. See “Power Management” on page 4-6 for more information.

NOTE: By configuring the BIOS Setup Utility, you can have the Tablet Computer automatical-

ly start up or resume when the external AC power is plugged in. See “BIOS Setup” on page

6-2 for more information.


CHAPTER

2

Operating Your Tablet

Computer

This chapter provides information about the use of the Tablet Computer and describes the operating basics of these components and features:

• Touch Screen

• Input Panel

• Panel Keys

• Wireless LAN Features

• Bluetooth Features

• 3G Network Features

• GPS Features

• Camera

• Barcode Reader

• Fingerprint Reader

• DAP Control Center

Operating Your Tablet Computer DAP Technologies 2-1

Using the Touch Screen

The touch screen is a touch-sensitive device that allows you to control and make selections on the Tablet Computer by controlling the location of the pointer on the screen.

CAUTION: Do not use sharp or pointed objects on the touch screen. These objects may scratch the screen. Use only the spring-tip end of the stylus or the tip of your finger.

2.0MP

Here are some common terms that you should know when using the touch screen.

Term

Tap

Double-tap

Tap and hold

Drag

Action

Tap gently on the touch screen to select or open an item.

Tapping is the same as clicking the left mouse button of a

PC.

Rapidly tap twice on the touch screen. This action is similar to double-clicking the left mouse button of a PC.

Tap and hold the stylus lightly on the display. A big circle appears to indicate that a pop-up menu will soon appear.

Lift up the stylus and a pop-up menu appears. Select the desired function. This action is similar to a right mouse click on a PC.

Hold the stylus on the screen and drag across the screen to select text and images or move icons to a new location.

For a more customized stylus settings, go to Start > Control Panel > Pen and

Touch.

2-2 DAP Technologies Operating Your Tablet Computer

Calibrating the Screen

When there is a noticeable discrepancy in the placement of the stylus on the screen and the indicated position of the onscreen pointer, recalibrate the screen.

Perform the following to calibrate the screen:

1. Tap Start > Control Panel > Tablet PC Settings.

2. On the Display tab, tap Calibrate.

3. Tap the cross-hair with the stylus as it moves around the screen.

4. When calibration is complete, tap Yes to close the calibration utility screen.


Using the Input Panel

The Tablet Computer Input Panel is a virtual keyboard that allows you to enter text and perform various keyboard functions.

There are two types of Input Panels for you to use:

• Touch Keyboard

Allows you to enter text by tapping the keys with the stylus, like pressing the keys on a standard keyboard.

• Writing Pad

Allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text.


Opening the Input Panel

To open the Input Panel

From the left side of the screen, drag the edge of the Input Panel towards the center.

To switch between keyboards

To switch between the Touch Keyboard and the Writing Pad, tap at the upper left corner of the Input Panel.

Managing the Input Panel

To change the Input Panel size

To increase the size of the Input Panel, select the lower right corner of the Input Panel and drag.

or

To position the Input Panel

The Input Panel floats on top of the screen by default. To move the Input Panel to an area on the screen, place the stylus on the title bar and drag the Input

Panel to a new location on the screen.

To dock the Input Panel

You can dock the Input Panel to so that it is anchored at the top or the bottom of the screen. On the Input Panel, tap Tools > Docking, and tap Dock at top of

screen or Dock at bottom of screen.

NOTE: For more information on using the Input Panel, see Windows’ online help.


Using the Panel Keys

The Panel Keys provide shortcuts for you to utilize the functions of your Tablet

Computer, such as adjusting the brightness setting or volume, and others.

Adjusting Volume

Peform the following to adjust the volume of your Tablet Computer:

• To increase volume, press ▲ or ► repeatedly.

• To decrease volume, press ▼ or ◄ repeatedly.

Adjusting Screen Brightness

Peform the following to adjust the screen brightness of your Tablet Computer:

• To increase brightness, press ▲ or ► repeatedly.

• To decrease brightness, press ▼ or ◄ repeatedly.


Using Wireless LAN

Your Tablet Computer has a built-in wireless antenna which automatically detects wireless networks that are within range.

It takes approximately 30 seconds for your Tablet Computer to make a successful wireless connection and approximately 10 seconds to disconnect.

Turning the Wireless Antenna On and Off

By default, the wireless antenna is turned on. In case you need to turn the wireless antenna on or off, perform the following:

1. Tap Start > All Programs > Tap Technology > DAP Control Center.


2. Tap Power Options tab.

3. To turn the wireless antenna on or off, tap ON or OFF.


Connecting to a Wireless Network

Perform the following to connect to a wireless network:

1. Make sure that the wireless antenna is “on” (The Wifi LED indicator in solid green and the Wireless network icon on the taskbar shows ).

2. Tap the Wireless Network icon ( ) on the taskbar.

3. In the list of available networks, tap a network.

4. Tap Connect.

5. If the network requires authentication, enter the security key or passphrase.

NOTE:

• Once you are connected to a wireless network, Windows saves the network profile and will automatically connect to that network when it is in range.

• For more information on connecting to a wireless network, see Window’s online help.


Using Bluetooth

Your Tablet Computer has integrated Bluetooth capability for short-range wireless communication between Bluetooth-enabled devices.

By default, the Bluetooth feature is enabled as indicated by the Bluetooth icon

( ) on the taskbar; but your Tablet Computer is not visible to other devices.

To make your Tablet Computer visible, check the Discovery box in Bluetooth

settings (see “Configuring Bluetooth Settings” on page 2-14).

Turning the Bluetooth Adapter On and Off

In case you need to turn the Bluetooth adapter on or off, perform the following:

1. Tap Start > All Programs > Tap Technology > DAP Control Center.


2. Tap Power Options tab.

3. To turn the Bluetooth feature on or off, tap ON or OFF.

Pairing with Bluetooth Devices

Before you can pair with Bluetooth devices for the first time, you need to add and save the device profile to your Tablet Computer.

To add and pair a Bluetooth device

Perform the following to pair your Tablet Compuer with Bluetooth devices:

1. Make sure the Bluetooth adapter is on as indicated by the Bluetooth icon

( ) on the taskbar.

2. Tap the Bluetooth icon ( ) to display a pop up menu.


3. Tap Add a Device. The Tablet Computer will scan for Bluetooth devices within range.

4. Tap the device you want to pair with, then tap Next.

5. Depending on the device you are pairing, you may be prompted to enter or verify the pairing code. The pairing code entered or shown on your

Tablet Computer and the Bluetooth device must be the same. Click Next to continue.


6. Windows will check for the device driver and install, if necessary. Tap

Close to close the screen.

Depending on the paired Bluetooth device, you may use your Tablet Computer speakers to listen to music played from the Bluetooth device, transfer files, and more.

NOTE: For more information on using Bluetooth features, see Windows online help.

To reconnect to a Bluetooth device

Once a Bluetooth device has been paired with your Tablet Computer, you do not need to enter or verify the pairing code as you did the first time.

To reconnect to a Bluetooth device, perform the following:

1. Make sure the Bluetooth adapter is on as indicated by the Bluetooth icon

( ) on the taskbar.

2. Tap the Bluetooth icon ( ) to display a pop up menu.

3. Tap Show Bluetooth Devices.


4. Tap and hold the Bluetooth device to display the pop up menu.

5. Tap Advance Operation, then tap the applicable connection operation.

When a Bluetooth device wants to pair with your Tablet Computer, a pop up message appears on the taskbar, tap the message to pair with the device.

Configuring Bluetooth Settings

The Bluetooth Settings allows you to configure how you want to connect to

Bluetooth devices, sync data, and other options. To access the settings, tap and hold the Bluetooth icon ( ) on the taskbar, and tap Open Settings.


Using 3G Network

Your Tablet Computer has 3G network capabilities that provide wireless connection to the Internet using a SIM card with data subscription.

Connecting to 3G Network

Your Tablet Computer comes with Sierra Wireless AirCard ® Watcher, an application that allows you to connect to the Internet using your SIM card and keeps you informed of your wireless connection status. Perform the following to connect to your 3G network:

1. Install a SIM card to your Tablet Computer (see “Installing the SIM Card” on page 1-13).

2. Open the AirCard ® Watcher application (tap Start > All Programs > Sierra

Wireless > AirCard Watcher).

The application detects the SIM card and displays network information on the AirCard ® Watcher main screen.

TIP: To open AirCard ® Watcher faster, create a desktop shortcut icon. Alternatively, you can set AirCard ® Watcher to open and connect automatically with your 3G network (see

“To configure 3G network profiles” on page 2-19).

3. Tap Connect to connect to the 3G network.

Once connected, the AirCard ® Watcher main screen displays the network connection information, such as signal strength, connection speed, and

bitrate transfer. For more information on using the application, see “Using

AirCard® Watcher” on page 2-16.


Using AirCard

®

Watcher

The AirCard ® Watcher main screen

1

2

3

4

5

6

9

10

11

7

8

No.

1

Item

3G On/Off

Signal Strength

Network Type

2 Toolbar

Wireless Profile

SMS

History

Airplane Mode

Description

• Green: 3G network is on.

• Red: 3G network is off.

• Green: Indicate the network signal strength. More lit bars indicate stronger signal.

• Red: No signal.

Indicates the network connection type.

Tap an icon to access the function.

Tap to view and modify wireless network profile.

Tap to open SMS Express to send and receive SMS messages on your Tablet

Computer.

NOTE: Your data plan subscription must support this feature to be able to send and receive SMS messages on your Tablet Computer.

Tap to view the usage history and clear the bitrate counters.

Tap to enable airplane mode. When this feature is enabled, the icon turns red. Tap the icon again or tap Turn Radio On to disable airplane mode.


No.

2

3

4

Item

AirCard GPS

Settings

Help

Network Name

Data Transfer Rate

Description

Tap to open AirCard GPS Monitor.

Tap to access the AirCard ® Watcher settings.

See “Configuring AirCard® Watcher Settings” on page 2-18.

Tap to view the help file.

Displays the name of the SIM card network provider.

Displays the upstream and downstream transfer information.

5

Home

Tap to open the Sierra Wireless website.

6

7

Speed Graph

Menu

Minimize

Restore

Tap to display a graphical table of the data transfer speed.

Tap to access the application menu.

Tap to minimize the application to the system tray.

Tap to toggle the display between full view and compact view.

Close

8 Connect / Disconnect

9

Button

Network Info

Tap to connect or disconnect from the 3G network.

A graphical display of the network connection type.

10 Speed

11

Indicates the network connection speed.

Customer Support Tap to open Sierra Wireless support website.


Configuring AirCard

®

Watcher Settings

On the AirCard ® screen below.

Watcher main screen, tap the Settings ( ) icon to display the

Tap a menu item on the left panel to display the corresponding settings on the right. The following menus are available:

General

Network

SIM Settings

Sounds

Profiles

Menu

Messaging

Description

Configures startup/shutdown settings, warning messages, display properties, and others.

Configures message settings such as service center number, default storage, and message notification.

Configures network mode and radio technology.

Enables SIM security settings.

Enables sound alert when network is connected, disconnected or when a new message is received.

Configures network profiles and auto-connect

functions. See “To configure 3G network profiles” on page 2-19.

Data Usage Tracking Enables data usage tracking and configures data subscription rate plan settings. This feature is useful when you have limited data rate plan to help you monitor and control your Internet usage.

Firmware Displays firmware information.


To configure 3G network profiles

Once a SIM card is used in your Tablet Computer, its network profile is created.

You can view network information, such as profile name, access point name

(APN), TCP/IP settings, and more. You can also set AirCard ® Watcher to automatically connect to the 3G network at startup.

1. On the AirCard ® Watcher main screen, tap the Wireless Profile ( ) icon.

NOTE: Alternatively, you can also access the Profiles menu, by tapping , and then

Profiles on the left panel.

2. On the Profiles menu, the following items are displayed:

• Selected profile: Displays the name of your 3G network.

• Autoconnect: Tap the field and then select one of the following:

• Never: Do not auto-connect to network.

• While not roaming: Automatically connects to network while within the local network coverage.

• Always (even when roaming): Automatically connects to network even when roaming outside the local network coverage.

NOTE: Connecting to your network while roaming may incur additional charges. Check with your service provider for details.

• Auto-create: Tap to automatically create a connection profile when using a new SIM card.

• Auto-select: Tap to automatically select the best connection profile for the current SIM.

3. Tap Apply to save the settings.

4. To view the SIM card information, tap the network name on the left panel.

5. Tap OK to close the screen.


Using GPS

Your Tablet Computer has a GPS (Global Positioning System) receiver module built in and includes the u-blox GPS Location Sensors software.

u-blox GPS Location Sensors is an application that allows you to manage the following:

• Location

• Assistance

• Satellites

To open u-blox GPS Location Sensors, tap Start > All Programs > u-blox >

u-tray > u-tray 1.1.0.4

Location

The Location tab provides an overview your location and system status.


Assistance

The Assistance tab allows you to set the schedule and download assistance data.

• To download update manually, tap Download Assistance Data.

• To set automatic download, check the Automatic box and select the frequency of automatic download in Offline validity.


Using the Camera

Your Tablet Computer has a built-in camera for taking photos.

Opening the Camera

Perform the following to open the camera:

Tap Start > All Programs > All Programs > DAP Technologies >

Camera.


The Camera Screen

1

10

9

8

2

3

4

5

6

7

No.

Item

1 Auto / Landscape /

Macro

2

3

Settings

Minimize

4

Exit

5

Shutter

6

Description

Shows the current shooting mode (by default

Auto).

Tap to view the camera settings. See “Camera

Settings” on page <OV>.

Tap to minimize the camera screen.

Tap to close the camera screen.

Tap to capture a photo.

Open the Photo Tap to open the captured photo.

7

/

Positioning

Tap to add/remove the GPS-based location information on the photo (by default disabled).

8

/ Flashlight

Tap to activate/deactivate the flashlight function

(by default deactivated).

9

/ Flash

Tap to enable/disable flash (by default disabled).


No.

10

Item

/ /

Shooting Mode

Description

Tap to select the shooting mode among the following options:

• Automatic Mode: The shooting mode is selected automatically.

• Landscape Mode: Select this mode if you wish to capture subjects from different distances from the camera, for example in the nature.

• Macro Mode: Select this mode if you want to capture a close up image of your subject.

Shooting Photos

1. Open the camera (see “Opening the Camera” on page 2-22).

2. Focus on your subject.

3. Tap to capture the photo.

4. By default, the photo preview is briefly shown on the screen.


The preview screen automatically closes after 3 seconds. Do one of the following:

• Tap

• Tap

to capture the next image.

to edit the image in Windows Photo Viewer.

• Tap to close the camera screen.

NOTE:

By default the system automatically creates a folder with the current date to the logged in user’s Pictures folder, and saves the images into that folder. For example, C:\Users\My

Name-PC\Pictures\2013-12-16.

Camera Settings

1. Tap to open the settings pop-up menu.

1

2

3

4

2. Modify the necessary settings.

No.

Item

1 Actions

Description

• Capture: Tap to capture an image.

• Show Image Folder: Tap to open the image folder.


No.

Item Description

• Advanced Settings...: Tap to open the Preset

Configuration page. On this page you can modify the default picture resolution, brightness, flash, auto focus, focus position, auto white balance and white balance of the camera. Tap on the parameter and select the desired value. After all modifications are done, tap Set to save changes. Tap to close the page.

2 Camera

• Edit Presets...: Tap to open the Presets page. On this page you can configure the default parameters of Auto,

Landscape, and Macro shooting modes. Tap on the mode and then tap Edit.... You can also set the mode as a default mode, by selecting a mode and clicking on Set

as Default. Tap OK to save changes and exit the page.


No.


• General...: Tap to open the General Options page. On this page you can define the file name template, target image folder location, start in mode and flash light duration. When all modifications are done, tap OK.

3 Options

Please be noted that you can use variables, to automate the image naming and image folder location and naming.

For example, instead of manually creating a new folder every time you capture images, with the help of varaibles you can let the system to create an image folder for you with the current date. The corresponding variables are as follows: %PICTURE%\%YEAR%-%MONTH%-%DAY%.

The %PICTURE% indicates the location of the image folder in Windows file system,%YEAR%-%MONTH%-

%DAY% is the current year-month-day. The “\” is the separator in the folder tree in Windows operating system. As a result of this example, the images are saved into the following folder: C:\Users\My Name-PC\

Pictures\2013-12-16.

To see the list of supported variables, tap Variables...

.

Operating Your Tablet Computer

Tap OK to return General Options page.

• Export Configuration...: Tap to select the location, where you want to save the configuration parameters.

The parameters are saved in XML-format.

DAP Technologies 2-27

No.


• Shortcuts: Tap to view the camera-function related shortcuts.

4 ?

• About: Tap to see the camera information page. Tap

Log, to create a log file or tap OK, to return to the camera screen.

3. When settings are complete, do one of the following:

• Tap to capture image.

• Tap to edit the image in Windows Photo Viewer.

• Tap to close the camera screen.


Using the Barcode Reader

Your Tablet Computer has a built-in barcode reader which is a 2D image CMOS type scanner that you can use to scan barcodes.

NOTE:

• The built-in barcode reader is an optional accessory. Contact your dealer to purchase.

• Alternatively, you can also use a Bluetooth scanner or connect an external barcode scanner to the RS232 port. See for more information.

Perform the following to scan barcodes using the built-in barcode reader:

1. Press and hold the barcode button ( ) to active the barcode reader. The barcode reader lights red.

2. Place the barcode label facing the barcode reader. Tablet Computer emits a beep sound when the barcode is read properly.

2.0MP


CAUTION:

• DO NOT aim the barcode scanner into the eyes. Laser beams may severely damage the eyes or may cause blindness if pointed directly into eyes.

• The use of optical instruments with your Tablet may increase eye hazard.

Using ScannerManager

The ScannerManager allows you to see the status and configure the settings of the Internal Scanner, Tethered Scanner, and Bluetooth Scanner.

Opening the ScannerManager

Perform one of the following to open the camera:

• Tap Start > All Programs > All Programs > DAP Technologies >

ScannerManager.

• Press the camera shortcut key ( ) icon on the taskbar.


Using the ScannerManager

1. Open the ScannerManager, see “Opening the ScannerManager” on page

2-30. The settings main page opens on the screen.

4

5

1

2

3

No.

1

2

Item

Internal Scanner

3 Bluetooth Scanner

4

Tethered Scanner

Trigger Options

Description

By default the inner scanner is enabled and connected. Tap Settings , to modify the decoder properties, import/export parameters, or disable the internal scanner.

Tap OK, to return to the ScannerManager main page.

By default the tethered scanner is disabled.

Tap Settings, to enable this scanner and do modifications to the serial link connection parameters.


By default the Bluetooth scanner is disabled.

Tap Settings, to configure the Bluetooth scanner connection parameters. See

“Working With Bluetooth Scanners” on page

2-33.


By default, when you press the barcode button ( ), the internal barcode scanner activates. Tap Trigger Options if you want to remove or assign the barcode scanner a different shortcut key.



No.

5 Output to

Item Description a) Select where to direct the barcode

scanning output. The available options are

as follows:

- Keyboard Wedge

- Link*One

- SDK.

b) Tap Settings, to modify the selected output

configuration.

2. When the modifications are done, tap

ScannerManager page.

, to close the


Working With Bluetooth Scanners

ScannerManager recognizes Bluetooth scanners that are in master mode. This means the scanner initiates the connection. To do that, it must have a way to know which unit to connect to.

Scanner manufacturers explain how to proceed to configure and pair their devices in their documentation. Usually, the user must create a special barcode based on the Bluetooth MAC address of the computer. Once that barcode has been generated, it does not change. It can be fixed on Tablet Computer, and the next time any scanner has to be associated with the unit, an operator simply needs to scan the code and wait the connection to be established automatically.

For DAP and Symbol/Motorola scanners, you can use the Bluetooth Master

Pairing tab in the ScannerManager Bluetooth settings as follows:


Using the Fingerprint Reader

Your Tablet Computer has a built-in fingerprint reader that you can use to scan and authenticate your fingerprints for security purposes. Instead of entering a password, you can simply swipe a finger on the fingerprint reader and log on to

Windows. The fingerprint reader also supports other advanced functions and applications that may require fingerprint authentication, such as website logon, quick launch, and stronger identity protection for websites, among others.

NOTE: Applications that may require fingerprint authentication vary and do not come pre-installed on the Tablet Computer.

Using AuthenTec TrueSuite

Before you can use the fingerprint reader, you must enroll your fingerprints using the AuthenTec TrueSuite application.

AuthenTec TrueSuite is a biometric software that protects the security of your data through the use of fingerprint authentication. When you enroll your fingerprints, your fingerprints are associated with your user name and password, and stored as a “user identity”.

To open AuthenTec TrueSuite, tap Start > All Programs > AuthenTec

TrueSuite > AuthenTec TrueSuite or tap on fingerprint reader on front panel.

Setting Up Your Fingerprints

To maximize your Tablet Computer security features, register your fingerprints for authentication.

1. Open the AuthenTec TrueSuite application (Start > All Programs >

AuthenTec TrueSuite > AuthenTec TrueSuite). A screen wizard appears.


NOTE: The computer images shown on the screen are for reference only and may differ from your Tablet Computer.

2. Locate the fingerprint reader on your Tablet Computer (see “Device

Overview” on page 1-3), then tap

Yes. The screen below appears.

3. Tap Yes.

4. When the screen below appears, tap a finger that you want to register.

5. The tapped finger is marked by a blue icon.


6. When registering your fingerprints for the first time, you will be prompted for a Windows Password. This password will be associated with your fingerprints as your “identity”. Enter a password, and tap OK.

NOTE: If you have not set Windows Password before, you are asked to create a password and confirm it. Enter a password, confirm the password, and tap OK.

7. Slowly swipe the marked finger on the fingerprint reader from left to right direction.

The screen below appears. The red bar indicates the scanning process.


8. Swipe the same finger again.

9. Swipe the same finger for the third time. When done, the screen below appears, notice that the blue icon turns green to indicate successful finger enrollment.

10. To register another finger, tap a finger and repeat steps 4 ~ 9. Or, tap

to complete the enrollment.

11. The software registration screen appears. Tap Register Now if you want to purchase the full version of AuthenTec TrueSuite or tap Register Later to continue using the version that came with your Tablet Computer.


12. When the screen below appears, your fingerprint enrollment is complete.

Removing an Enrolled Fingerprint

Perform the following to remove the authentication of an enrolled fingerprint:

1. Open the AuthenTec TrueSuite application (Start > All Programs >

AuthenTec TrueSuite > AuthenTec TrueSuite).

2. Swipe an enrolled fingerprint on the fingerprint reader.

NOTE: Alternatively, you can also enter the Windows Password by tapping I want to use my

Windows password.


3. Tap and hold the marked fingerprint that you want to remove.

4. Tap Delete finger. The green icon is removed.


Log On to Windows by Fingerprints

After enrolling your fingerprint, you can use the enrolled finger to log on to

Windows.

Perform the following to use fingerprint authentication for Windows log on:

1. If the Tablet Computer has more than one account, tap the Fingerprint profile icon. The screen below appears.

2. Slowly swipe an enrolled finger on the fingerprint reader from left to right direction. If the fingerprint matches, Windows opens.


Using the DAP Control Center

Your Tablet Computer has a control center for viewing system information, setting power options and defining hotkeys.

Opening the DAP Control Center

Perform the following to open the DAP Control Center:

Tap Start > All Programs > All Programs > DAP Technologies > DAP

Control Center.


Viewing System Information

To view system information, open the DAP Control Center, see “Opening the

DAP Control Center” on page 2-41. The System Info page opens.


Setting Power Options

To switch off or on the WWAN, WLAN, Bluetooth, or Rear Camera, open the

DAP Control Center (see “Opening the DAP Control Center” on page 2-41),

and tap on Power Options tab.


Defining Hotkeys

To define hotkeys, do the following:

1. Open the DAP Control Center, see “Opening the DAP Control Center” on page 2-41.

2. Tap on Hotkeys tab. The Hotkeys page opens.

3. Tap New... ( ). The Input Key window opens.

You can assign a hotkey-function to the following keyboard keys:

• ESC (Escape key)

• TAB (Tabular key)

• RETURN (Enter key).

4. Tap on the key in Input key window, for hotkey assignment, and tap OK.

The selected hotkey appears in the table on Hotkeys page .

5. Assign an action to the hotkey. Tap on the hotkey and then tap on Action field. A list of actions opens on the screen. Tap on the desired action in the list.


NOTE:

To activate the hotkey, make sure the Enabled checkbox is checked.

In the following illustration, the TAB key is assigned to open the Wireless

Manager.

6. After the hotkey is assigned, do one of the following:

• Tap New, to assign the next hotkey. Repeat steps from 1 to 6.

• Select the key and tap Delete, to delete the hotkey assignment.

• Tap Reset All to Default, to remove all the hotkey assignments.

• Tap , to close the Hotkeys page.


CHAPTER

3

Connecting Your Tablet

Computer

You can extend the capabilities of your Tablet Computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.

This chapter gives guidelines on installing and using these devices:

• USB Device

• HDMI Device

• Audio Device

• Serial Devices

Connecting Your Tablet Computer DAP Technologies 3-1

Connecting USB Devices

Your Tablet Computer has two USB ports: one USB (Type A) port and one mini

USB port.

USB Port Connection

Use the USB port to connect USB devices, such as a flash disk drive, scanner, printer, keyboard, and mouse.

To connect a USB device, simply plug the device cable into the USB port of your Tablet Computer.

Mini USB Port Connection

Use the mini USB port to connect your Tablet Computer to another computer or notebook.

To connect, plug the mini USB cable connector to the mini USB port of your

Tablet Computer and plug the other end of the USB cable to a computer or notebook.

3-2 DAP Technologies Connecting Your Tablet Computer

Connecting HDMI Devices

Your Tablet Computer has one mini HDMI port for connecting HDMI devices, such as an external monitor.

To connect an HDMI device, simply plug the device cable into the mini HDMI connector of your Tablet Computer.


Connecting Audio Devices

Your Tablet Computer has one combo audio connector that supports both audio in and audio out devices. You can connect speakers, headphones, or an earphone set.

To connect an audio device, simply plug the device cable into the audio connector of your Tablet Computer.

3-4 DAP Technologies Connecting Your Tablet Computer

Connecting Serial Devices

Your Tablet Computer has one RS232 port for connecting serial devices, such as barcode scanners, printers, among others.

To connect a serial device, simply plug the device cable into the RS232 port of your Tablet Computer. Attach the screws to secure the connection.


CHAPTER

4

Managing Power

Your Tablet Computer operates either on external AC power or on battery power.

This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.

The topics in this chapter include:

• How to charge the battery pack

• How to check the battery level

• What happens when the battery is low and what actions to take

• What is Power Management

• How to save power

Managing Power DAP Technologies 4-1

Battery Pack

The operating time of a fully charged battery pack depends on how you use the Tablet Computer. When you use applications that often access peripherals, or when you stay connected to a wireless network, the operating time of the battery may be shortened.

WARNING:

• Do not disassemble the battery pack. There are no user-serviceable parts inside. Doing so may present risk of exposure to harmful chemicals, explosion or fire.

• Contact your local waste disposal service provider regarding the disposal or recycling of used battery packs.

Charging the Battery Pack

To charge the battery pack, perform the following:

1. With the battery pack installed, plug the DC cord of the AC adapter into the power connector of the tablet computer.

2. Plug the female end of the AC power cord into the AC adapter.

3. Then plug the male end of the AC power cord into an electrical outlet.

3

1

2

The battery LED indicator ( ) blinks green to indicate that charging is in progress. When the battery is fully charged, the battery LED indicator glows solid green.

4-2 DAP Technologies Managing Power

Checking the Battery Level

To check the battery level, press the battery button of the battery pack. The battery LED lights up. The number of lit up LEDs indicates the battery level of the battery pack.

NOTE: The battery capacity indicator shows only an approximate battery level status.


Replacing the Battery Pack

If you rely on battery power for a long period of time, consider purchasing additional batteries from your dealer to use for backup.

To replace the battery pack, perform the following:

1. Shut down the Tablet Computer.

2. Disconnect the Tablet Computer from the AC power.


4. Slide the battery locks to the unlock ( ) position (A).

5. Slide the battery latches outward to the “ open” position (B).

A

B

6. Insert your finger on the tab and then lift to remove the battery pack .

4-4 DAP Technologies Managing Power

7. Install the replacement battery pack in place (see “Installing the Battery

Pack” on page 1-14).

NOTE: You can still operate the Tablet Computer without a battery pack when it is connected to a power source. However, this action is not recommended as an empty battery pack slot exposes the

Tablet Computer internal parts to environmental hazards, such as dust and water.

Power Management

The power management feature helps reduce power consumption which extends battery life.

Your Tablet Computer supports ACPI (Advanced Configuration and Power

Interface) for power management. Power supply to different components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time.

Windows comes with pre-defined Power Options ( Balanced, Power Saver, and High Performance) for you to select. You can access Power Options by tapping Start > Control Panel > Power Options. By default, your Tablet

Computer is in Balanced Mode.

For detailed information on power management, see Windows Help.

Power Saving Tips

Here are some practical suggestions that you can do to maximize the operating time of the battery:

• Enable Power Management. Choose a power plan that saves power. A power plan is a collection of hardware and system settings that control how your Tablet Computer manages power.

• Decrease the LCD brightness to the lowest comfortable level.

• Shorten the length of time before Windows turns off the display.

• Many USB devices use power just by being connected. If you use a USB flash drive, unplug it when you are not using it.

• Deactivate the Wireless LAN function if you are not using it.

• Deactivate Bluetooth wireless feature if you are not using it.

• Turn off the Tablet Computer when you are not using it.


CHAPTER

5

Expanding Your Tablet

Computer

You can optimize the capabilities of your Tablet Computer by using other optional accessories.

This chapter gives guidelines on installing and using these accessories:

• Docking Station

• Expansion Module

• Extendable Battery Pack

Expanding Your Tablet Computer DAP Technologies 5-1

Connecting the Docking Station

The Office Dock, a docking station designed for use with your Tablet Computer is available as an optional accessory.

The Office Dock has the following features:

• Docks the Tablet Computer with adjustable fangs up to 20° for comfortable viewing capabilities

• Charges the Tablet Computer battery pack

• Charges an additional battery pack with its extra battery bay

• Provides four USB ports

• Provides one RS232 port

• Provides one Line-In and one

Line-out port

• Provides one RJ45 jack that supports up to 1GB LAN connection

• With two LED indicators

Docking the Tablet Computer

To dock your Tablet Computer, simply align the docking connectors of the Tablet

Computer to the connectors on the Office Dock.

NOTE: For information on using the Office Dock, refer to the User Manual that comes with the device.

5-2 DAP Technologies Expanding Your Tablet Computer

Installing the Expansion Module

Your Tablet Computer is designed to extend its functionality with the use of the

Expansion Module. The Expansion Module provides a Smart Card Reader and a SIM card slot.

Perform the following to install the Expansion Module to your Tablet Computer:

1. Align the expansion connectors (pogo connectors) of your Tablet

Computer to the connectors on the Expansion Module.

2. Tighten the screw to secure the Expansion Module to the Tablet Computer.

NOTE: For information on using the Expansion Module, refer to the User Manual that comes with the module.


Installing the Extendable Battery Pack

For longer battery life, you can use the Extendable Battery Pack which is available as an optional accessory.

Perform the following to install the Extendable Battery Pack to your Tablet

Computer:


2. Align and place the battery pack on its bay.

3. Tighten the screws to secure the Extendable Battery Pack to the Tablet

Computer.

5-4 DAP Technologies Expanding Your Tablet Computer

Checking the Battery Level

To check the battery level of the Extendable Battery Pack, press the battery button. The battery LED lights up. The number of lit up LEDs indicates the battery level of the battery pack.


CHAPTER

6

Using BIOS Setup and

System Recovery

BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output

System) settings of the tablet computer. The BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the tablet computer hardware can understand. The BIOS settings are needed by your tablet computer to identify the types of installed devices and establish special features.

System Recovery reinstalls Windows to your system and configures it to s factory default settings.

The chapter describes how to use the BIOS Setup and System Recovery.

Using BIOS Setup and System Recovery DAP Technologies 6-1

BIOS Setup

When to Use

You need to run BIOS Setup utility when:

• You see an error message on the screen requesting that you run BIOS

Setup utility.

• You want to restore the factory default BIOS settings.

• You want to modify some specific hardware settings.

• You want to modify some specific settings to optimize the system performance.

Starting BIOS Setup Utility

A USB keyboard is required to access, move around, and make selections in the BIOS Setup Utility.

1. Before turning on the Tablet Computer, connect the USB keyboard to the

USB port of the Tablet Computer.

2. Power on the Tablet Computer.

3. When the system starts up and the post screen logo appears, quickly press F2 or the Delete key to enter the BIOS Setup Utility.

6-2 DAP Technologies Using BIOS Setup and System Recovery

How to Use

NOTE:

• The BIOS Setup Utility screens shown in this chapter are for reference only. The actual items or settings on your Tablet Computer may differ.

• The settings you select in your operating system might override similar settings in BIOS Setup

Utility.

+ / -

F1

F9

F10

Esc

Key

◄ / ►

▲ / ▼

Enter

Function

Selects a menu title.

Selects an item or option.

• Brings up the submenu, if available

• When an item is selected, opens or closes the options window

• Goes to the next field when an item has multiple fields, such as System Date.

Changes the option or adjusts the value.

Displays help.

Optimized Defaults.

Save and exit BIOS.

Returns to the previous menu if in a submenu or Exit BIOS.


BIOS Menu

Main Menu

The Main menu contains the system date and time settings and shows the basic system information.

Main Security

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.

Advanced Internal Devices Boot Save & Exit

Set the Date. Use Tab to switch between Date elements.

System Date

System Time

Processor Type

Processor Speed

Total Memory

Internal Drive Model

System Model

Bios Version

Quiet Boot

[Sat 01 /04/2014]

[09:38:55]

Intel(R) Atom(TM) CPU

1600 MHz

4096 MB

SanDisk SSD (64GB)

MT1010

E190

[Enabled]

: Select Screen

: Select Item

Enter: Select

+/_:Change Opt.

F1: General Help

F9: Optimized Defaults

F10: Save & Exit

ESC: Exit

Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

• System Date: Sets the system date.

• System Time: Sets the system time.

• Quiet Boot: Enables or disables the Quiet Boot option.

Security Menu

The Security menu contains the security settings, such as configuring the

Supervisor Password and Trusted Computing.

Main Security



Supervisor Password

Supervisor Password

Trusted Computing

Clear

Set Supervisor Password

To clear supervisor password, please enter old password first and leave new password and new password confirmation blank.

: Select Screen

: Select Item

Enter: Select

+/_:Change Opt.

F1: General Help


F10: Save & Exit

ESC: Exit


• Supervisor Password: Configures the supervisor password which will be required before you can enter the BIOS Setup Utility. When the Supervisor

Password is configured, the word “Set” is shown on the screen. If the


Supervisor Password is not configured, the word “Clear” is displayed.

• Trusted Computing: Enables or disables BIOS support for TPM (Trusted

Platform Module) security devices.

Advanced Menu

The Advanced menu contains the advanced settings, such as Wake On LAN and Storage Device Data Interface settings.

Main Security



Storage Device Data Interface [AHCI]

Hard Disk Controller

Configuration

[IDE]: SATA Controller operates in native IDE mode.

[SATA]: SATA Controller operates in enhanced AHCI mode.

[WARNGING]: Changing this setting may cause your SO to stop

: Select Screen

: Select Item

Enter: Select

+/_:Change Opt.

F1: General Help


F10: Save & Exit

ESC: Exit


• Storage Device Data Interface: Selects how the hard disk controller operates, options are IDE or AHCI mode.


Internal Devices Menu

The Internal Devices menu enables or disables the built-in devices in the Tablet

Computer.

Main

GPS

ALS

Security



[Enabled]

[Enabled]

[Enabled]: GPS is active.

[Disabled]: GPS is not active.

: Select Screen

: Select Item

Enter: Select

+/_:Change Opt.

F1: General Help


F10: Save & Exit

ESC: Exit


• GPS: Enables or disables the GPS antenna.

• ALS: Enables or disables the Ambient Light Sensor (ALS).

Boot Menu

The Boot menu sets the boot order of devices.

Main Security



Set Boot Priority.

Set Boot Priority

1st Boot

2nd Boot

3rd Boot

4th Boot

5th Boot

6th Boot

[USB CD/DVD]

[Hard Disk: 64GB SA...]

[USB Hard Disk:Gene...]

[USB KEY]

[USB Floppy]

[Network:Realtek PX...]

: Select Screen

: Select Item

Enter: Select

+/_:Change Opt.

F1: General Help


F10: Save & Exit

ESC: Exit


Save & Exit Menu

The Save & Exit menu displays ways of exiting BIOS Setup Utility. After modifying the settings, you must save and exit for the changes to take effect.


Main Security



Reset the system after saving the changes.

Save Changes and Reset

Discard Changes and Exit

Restore Defaults

Discard Changes

Save Changes

: Select Screen

: Select Item

Enter: Select

+/_:Change Opt.

F1: General Help


F10: Save & Exit

ESC: Exit


• Save Changes and Reset: Saves the changes then restarts the system.

• Discard Changes and Exit: Exits BIOS Setup Utility without saving the changes you have made.

• Restore Defaults: Restores the default values for all the setup items.

• Discard Changes: Restores the previous values of all items.

• Save Changes: Saves the changes you have made.


APPENDIX

A

Maintenance, Troubleshooting and Specifications

This chapter covers the following topics:

• How to care for your Tablet Computer

• Troubleshoot your Tablet Computer

• Tablet Computer Specifications

Specifications DAP Technologies A-1

Taking Care of the Tablet Computer

Location Guidelines

• Keep the tablet computer at least 13 cm (5 inches) away from electrical appliances that can generate a strong magnetic field such as a TV, refrigerator, motor, or a large audio speaker.

General Guidelines

• Do not place heavy objects on top of the tablet computer as this may damage the display.

• The screen surface is easily scratched. Use the screen protector film to protect it. Do not use paper towels to clean the display but use the included cleaning cloth. Avoid touching it with a pen or pencil.

• To maximize the life of the backlight in the display, allow the backlight to automatically turn off as a result of power management. Avoid using a screen saver or other software that prevents the power management from working.

Cleaning Guidelines

• Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the tablet computer.

• Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.

Touchscreen Guidelines

• Use your finger or the included stylus on the display. Using a sharp or metallic object may cause scratches and damage the display, thereby causing errors.

• Use a soft cloth to remove dirt on the display. The touchscreen surface has a special protective coating that prevents dirt from sticking to it. Not using a soft cloth may cause damage to the special protective coating on the touchscreen surface. To clean off hard to remove dirt, blow some steam on the particular area and gently wipe away using a soft cloth.

• Do not use excessive force on the display. Avoid placing objects on top of the display as this may cause the glass to break.

When there is a noticeable discrepancy in the operation of the touchscreen function (stylus touch does not correlate to the proper location on the screen),

recalibrate the touchscreen display (see “Calibrating the Screen” on page

2-3).

A-2 DAP Technologies Specifications

Troubleshooting

When you encounter problems when using the Tablet Computer, try the following troubleshooting tips first to detect and solve the problem. If the problem persists, contact customer support.

Problem

The battery is not charging.

Nothing appears on the screen.

The screen suddenly turns blank and the power indicator goes off.

I cannot use the wireless

LAN feature.

Wireless LAN signal quality is poor.

I cannot connect to another wireless LAN device.

Solution

• Make sure the AC adapter is properly connected.

• Make sure the battery is not too hot or too cold.

• Make sure the battery pack is installed correctly.

• Make sure the battery terminals are clean.

• The Tablet Computer may be in sleep mode.

Press the power button to wake up the display.

• The brightness level may be too low. Increase

brightness (see “Adjusting Screen Brightness” on page 2-6).

• Make sure the AC adapter is properly connected.

• If using a battery pack, the battery pack may be depleted, replace or charge the battery.

• Make sure that wireless LAN feature is turned on.

• The Tablet Computer may be out of range. Move your Tablet Computer closer to the access point or another wireless LAN device associated with it.

• Check if your surroundings have interferences, such as microwave ovens, cordless phones.

Move the Tablet Computer away from objects causing interference.

• Make sure that wireless LAN feature is turned on.

• Make sure that the SSID setting is the same for every wireless LAN device in the network.

• Restart the Tablet Computer.

• Make sure the IP address or subnet mask setting is correct.


Problem

I cannot connect to another device with

Bluetooth.

Solution

• Make sure that both devices have Bluetooth turned on.

• Make sure that the distance between the two devices is within 10 meters and there are no walls or large obstructions between the devices.

• Make sure that both devices are turned on and are configured to be discoverable.

• Make sure that both devices are compatible.

No sound is produced.

• Adjust the volume of the Tablet Computer (see

“Adjusting Volume” on page 2-6).

• If using an external audio device, make sure that the cable is properly connected.


Tablet Computer Specifications

Technical Specifications

Processor

BIOS

Chipset

Main Memory

Display

Graphics

Camera

Storage

Card Slot

Connectivity

LED Status Indicator

Interface

Antenna

Audio

Power Management

Intel ® Cedar Trail

N2600 (1.6GHz)

• AMI Aptio ®

• TAA socket

• Intel Tiger Point

• NM10

DDR3 2GB

• 10.1” backlight LED

• 1280 x 800

• Intel Cedar View SGX545

• SGX545@400MHz

• Back Cam CMOS, 5.0MP with auto focus

• Front Cam CMOS, 2MP with fixed focus

32/64/128GB

MicroSD Card Reader

• WLAN: 802.11 a/b/g/n, half-size mini PCI-E card with BT

• WWAN: Gobi 5000

• Heater On

• RF On/Off

• Battery Full / Charging / Low

• Power On

• 3.5 Φ Audio Jack x 1

• HDMI Type D x 1

• MicroSD Card x 1

• Micro-SIM Card x 1

• USB Type A x 1

• USB Mini-A x 1

• RJ-45 x 1

• Expansion Port x 1

• Docking Port x 1

• WWAN Main

• WLAN x 2

• GPS

• Single Digital Mic

• 1 x Speaker, 200Hz ~ 16KHz

ACPI 3.0 Supported


Technical Specifications

Battery Bridge Battery

AC Adapter

Lithium-Polymer Battery Pack with power saving features activated

AC 100 ~ 240V, 50 ~ 60Hz, DC 12V, 60W

Physical Specifications

Dimensions (WxHxT)

Weight

Security

290 x 195 x 21 mm

< 1.2 Kg (including battery)

• Infineon chip on board

• Fingerprint Reader Swipe-type biometric sensor

• Kensington Lock


APPENDIX

B

Regulatory Information

This appendix provides regulatory statements and safety notices about your

Tablet Computer.

NOTE: Marking labels located on the exterior of your Tablet Computer indicate the regulations that your model complies with. Check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.

Regulatory Information DAP Technologies B-1

Important Information

ATTENTION: Pour réduire le risque d’incendie ou de choc électrique ne pas exposer l’appareil à la pluie ou à l’humidité. VERIFIER que le cordon électrique est la prise murale pour un delai d’inactivite prolongé. Pour arrêter complètement l’alimentation de l’appareil, débranchez le cordon d’alimentation de la prise AC.

N’enlever ni le capot arrière ni les pièces internes de l’appareil. Contactez un personnel qualifié si nécessaire.

SA1965

SA1966

AVERTISSEMENT ÉLECTRIQUE

Utilisé pour les instructions destinés à alerter l’utilisateur d’un

CHOC ÉLECTRIQUE mortel ou de blessure grave en cas d’utilisation incorrecte de l’unité.

AVERTISSEMENT

Utilisé pour les instructions destinés à alerter l’utilisateur d’un risque mortel ou de blessure grave en cas d’utilisation incorrecte de l’unité.

ATTENTION: Pour réduire le risque d’incendie ou de choc electrique ne pas exposer l’appareil à la pluie ou à l’humidité FAIRE le cordon électrique est

DÉBRANCHÉ DE LA PRISE MURALE DANS UN DELAI DE PROLONGER

INACTIVITÉ. De se désengager totalement LE POUVOIR DE L’UNITE, S’IL

VOUS PLAÎT DEBRANCHER LE CORDON D’ALIMENTATION DE LA PRISE

AC. NE PAS Romove le capot arrière, pas de PIÈCES À L’INTÉRIEUR.

Contactez un personnel qualifié S’il faut le réparer.

SA1965

SA1966

ELECTRIQUE AVERTISSEMENT

Sert aux instructions destin es alerter l’utilisateur d’un CHOC

ÉLECTRIQUE mortel ou de blessure grave en cas d’utilisation incorrecte de l’unit.

AVERTISSEMENT

Sert aux instructions destin es alerter l’utilisateur d’un risque mortel ou de blessure grave en cas d’utilisation incorrecte de l’unit .

B-2 DAP Technologies Regulatory Information

Safety Information (EN)

Follow and adhere to all warnings and instructions on the screen. For your safety, please read all safety and operating instructions before using the Tablet

Computer. Keep this manual for future reference.

1. Carefully read all recommendations and precautions for use before using this product.

2. Retain all recommendations and precautions for future reference as necessary.

3. Read and be sure to understand all warnings listed in the precautions.

4. Follow all operating precautions when using this product.

5. Use only a dry cloth to clean this product.

6. Do not place the product near any heat sources such as radiators, warm air intakes, stoves or other heat-generating devices (including amplifiers or other heat producing equipment).

7. Do not disregard the safety that a polarized or grounded connection can provide. A polarized connection consists of two plugs, one of which is larger than the other. A grounded connection has two blades and a third one that is grounded. If the main plug provided cannot be inserted into your outlet, consult an electrician to replace your obsolete outlet.

8. Protect the power cord from being crushed or pinched, particularly in the area of the plugs, any receptacles used, and the point of exit from the apparatus. Do not break off the ground pin of the power cord.

9. Use only accessories specified by the manufacturer.

10. Use only with accessories specified by the manufacturer or sold with the product.

11. Unplug this apparatus during lightning storms or when it is not being used for long periods.

12. Refer all servicing to qualified service personnel. A technical intervention is required when the apparatus has been damaged in any way or does not operate normally.


Informations de sécurité (FR)

Suivez et respectez tous les avertissements et instructions figurant sur l’écran.

Pour votre sécurité, s’il vous plaît lire toutes les consignes de sécurité et de fonctionnement avant d’utiliser le Tablet Computer. Gardez ce manuel pour référence future.

1. Lire avec attention toutes les recommandations et precautions d’emploi avant d’utiliser ce produit.

2. Veuillez conserver ces recommandations et précautions pour référence future.

3. Lire et comprendre tous les avertissements énumérés dans les précautions d’emploi.

4. Suivre toutes les précautions d’emploi pour utiliser ce produit.

5. Utiliser exclusivement un chiffon sec pour nettoyer ce produit.

6. Ne pas placer le produit près de toute source de chaeur telle que radiateurs, arrivées d’air chaud, fourneaux ou autres appareils générant de la chaleur (incluant les amplificateurs producteurs de chaleur) .

7. Ne pas négliger la sécurité que procure un branchement polarisé ou avec raccordement à la terre, Un branchement polarisé comprend deux fiches dont l’une est plus large que l’autre. Un branchement à la terre comprend deux fiches plus une troisième reliée à la terre. Si la fiche secteur fournie ne s’insert pas dans votre prise de courant. consulter un ‘électricien afin de remplacer votre prise obsolète.

8. Protéger le cordon d’alimentation de tout écrasement ou pincement, particulièrement au niveau des fiches, des réceptacles utilisés et à l’endroit de sortie de l’appareil. Ne pas casser la fiche de terre du cordon d’alimentation.

9. Utiliser uniquement les accessoires spécifiés par le constructeur.

10. Utilisez seulement des accessoires spécifiés par le manufacturier ou vendus avec le produit.

11. Débrancher cet appareil lors d’orages ou s’il n’est pas utilize pendant une longue période.

12. Faire exécuter le service par du personnel qualifié. Une intervention technique est requise lorsque l’appareil a été endommagé ou n’opère pas normalement.


About the Batteries

Nordic Lithium Cautions (for lithium-ion batteries)

CAUTION!

Dispose of used batteries according to the manufacturer’s instructions. (English)

ATTENTION!

Il y a danger d’explosion s’il y a remplacement incorrect de la batterie.

Remplacer uniquement avec une batterie du mêre type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. (French)

About the Adapter

• Use only the supplied AC adapter (Rating: Input DC 12V, 4.16A). Use of another type of AC adapter will result in malfunction and/or danger.

• Do not use the adapter in a high moisture environment. Never touch the adapter when your hands or feet are wet.

• Allow adequate ventilation around the adapter when using it to operate the device or charge the battery. Do not cover the AC adapter with paper or other objects that will reduce cooling. Do not use the AC adapter while it is inside a carrying case.

• Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging.

• Do not use the adapter if the cord becomes damaged.

• Do not attempt to service the unit. There are no serviceable parts inside.

Replace the unit if it is damaged or exposed to excess moisture.


FCC Regulations

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.

Operation on the 5.15-5.25GHz frequency band is restricted to indoor use only.

The FCC requires indoor use for the 5.15-5.25GHz band to reduce the potential for harmful interference to co-channel Mobile Satellite Systems. Therefore, it will only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz and 5.725 –5.850 GHz band when associated with an access point (AP).


CE Notice (European Union)

This device has been tested and found to conform with the limits set for a Class

B product.

• EN 55022 — “Limits and Methods of Measurement of Radio Interference

Characteristics of Information Technology Equipment”

• EN 55024 — “Information technology equipment - Immunity characteristics -

Limits and methods of measurement”

• EN 61000-3-2 — “Electromagnetic compatibility (EMC) - Part 3: Limits -

Section 2”

• EN 61000-3-3 — “Electromagnetic compatibility (EMC) - Part 3: Limits -

Section 3”

• EN 60950 — “Safety of Information Technology Equipment.”

• EN 55022 Emissions requirements

RF Exposure Information (SAR)

This device is compliance with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65

Supplement C.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device was tested for operations with the device contacted directly to the human body to the back side of the EUT. To maintain compliance with FCC RF exposure compliance requirements, avoid direct contact to the transmitted antenna during transmitting.

IC Regulations

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.


Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.”

This Class B digital apparatus complies with Canadian ICES-003

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du

Canada.

The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.

The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems; the maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and

5470-5725 MHz) to comply with the e.i.r.p. limit; and The maximum antenna gain permitted (for devices in the band 5725-5850 MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3). In addition, High-power radars are allocated as primary users (meaning they have priority) of the band 5250-5350

MHz and this radar could cause interference and/or damage to LE-LAN devices.

The County Code Selection feature is disabled for products marketed in the US/

Canada. For product available in the USA/ Canada markets, only channel 1~11 can be operated. Selection of other channels is not possible.

Important Note

IC Radiation Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528.


Toll Free : +1 (855) DAP-TECH (327-8324) www.daptech.com

United States

8945 South Harl Avenue, Suite 112

Tempe, Arizona, 85284 USA


2915 Premiere Parkway, Suite 300

Duluth, Georgia 30097, USA


Canada

4535 Wilfrid Hamel Blvd., Suite 100

Quebec City, QC Canada G1P 2J7

Toll Free: +1 (800) 363-1993

Phone: +1 (418) 681-9394

Fax: +1 (418) 681-0799

Europe, Middle East, Africa

9 The Chambers, Vineyard

Abingdon UK OX14 3PX

Phone: +44 (0) 1235 462130

Fax: +44 (0) 1235 462131

PN: 1506-0P35000 • January 2014

No results