Puleo International ST9612-30C05-PP 3 ft. Pre-Lit Purple Artificial Christmas Tree Instructions

ASSEMBLY & USE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:









The product is for indoor use.

To reduce the risk of fire, do not deliberately reposition either bulb or lampholder contact.

To reduce the risk of overheating, replace burned out lamps promptly. This is an electrical product - not a toy! To avoid the risk of fire, burns, personal injury, and electric shock it should not be played with or placed where small children can reach it.

Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.







When products are used in outdoor applications, connect the product to a Ground Fault

Circuit interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.

This seasonal use product is not intended for permanent installation or use.

Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.















Do not let lamps rest on the supply cord or on any wire.

Unplug the product when leaving the house, when retiring for the night, or if left unattended.

Do not use this product for other than its intended use.

Do not hang ornaments or other objects from cord, wire, or light string.

Do not close doors or windows on the product or extension cord as this may damage the wire insulation.

Do not cover the product with a cloth, paper or any material not part of the product when in use.

The product employs overload protection (fuse). A blown fuse indicates an overload or short circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded.

Read and follow all instructions that are on the product or provided with the product.

SAVE THESE INSTRUCTIONS

ASSEMBLY INSTRUCTIONS:

1. Place the metal stand on a flat floor.

2. Assembly the tree according to following diagram.

3. Connect light strings according to following diagram.

4.

Shape the leaves to a natural look according following diagram. Now you can plug the extension cord to perform the tree for decoration.

Page 1 of 2

USE AND CARE INSTRUCTIONS:

Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders, loose connections, or exposed copper wire. Before storing the product, carefully remove the product from wherever it is placed to avoid any undue strain or stress on the product conductors, connections, and wires.

When not in use, store neatly in a cool, dry location protected from sunlight.

USER SERVICING INSTRUCTIONS:

BULB REPLACEMENT INSTRUCTIONS:

Risk of fire. Do not replace attachment plug. Contains a safety device

(fuse) that should not be removed. Discard product if the attachment plug is damaged.

1. Make sure the light string is unplugged.

2. Remove plugs from the receptacle or other outlet device. Do not unplug by pulling the cord.

3. Allow bulb to cool. To remove bulb, pull bulb out of socket.

CAUTION : To reduce the risk of overheating, replace burned out lamps promptly. Use

2.5

volt 0.425

watt lamps only.

FUSE REPLACEMENT INSTRUCTIONS FOR EACH LIGHT STRING:

Risk of fire . Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

1. Unplug product from the receptacle or other outlet device. Do not unplug by pulling on cord.

2. Open fuse cover. Slide open fuse access cover on top of attachment plug toward blades.

3. Remove fuse carefully.

4. Risk of fire. Replace fuse with 3 Amp, 125 Volt fuse (provided with this product).

5. Close fuse cover: slide closed the fuse access cover on top of attachment plug.

TROUBLESHOOTING:

If your tree does not light up, please check the following.

1. Check that all plugs are properly connected.

2. Check fuse in cord plug. If the fuse is burned out, please replace it with spare fuse enclosed.

3. Check wall outlet for power.

4. Check for loose, missing, or broken bulbs.

CONTACTING CUSTOMER SERVICE:

If you have any queries about the product, you can call the free number for solution.

FOR CUSTOMER SERVICE CALL: 1-800-311-3324

Business Hours: Monday - Friday - 9:30 am - 4:00 pm EST

Page 2 of 2