advertisement
HP Photosmart M425/M525
Digital Camera
User Guide
Downloaded from ManualsCamera.com Manuals
� �� � �� �� � �� � � � � �� � � � �
Legal and notice information
© Copyright 2006 Hewlett-Packard
Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions contained herein.
Windows® is a U.S. registered trademark of Microsoft Corporation.
SD Logo is a trademark of its proprietor.
Downloaded from ManualsCamera.com Manuals
Contents
Taking pictures and recording video clips.......................................................11
Transferring images with HP Photosmart Software..............................................25
Transferring images without HP Photosmart Software.........................................25
3
1
Getting started
Use this section to get familiar with camera controls, set up your digital camera for use, and begin taking pictures.
Camera top and back
1 3 4 5 6 7
8
9
10
11
2 15 14 13 12
1
13
Shutter button.
2
3
4
Video button.
Flash button—See
.
Photosmart Express button—See
5
8
9
6
7
Live View/Playback button—Switches between Live View and
Playback (see
Taking pictures and recording video clips on page 11 and
Reviewing images and video clips on page 20 ).
Power light.
button.
Zoom lever—See
.
Wrist strap mount.
10
Mode button—Press to access the Shooting Mode menu while in Live
View (see
Using the shooting modes on page 15 ).
11
and buttons—Scrolls through menus and images.
12
button—Displays camera menus, selects options, and confirms actions.
Delete button—Accesses the Delete function while in Playback (see
5
Chapter 1
(continued)
14 Image Display.
15 Battery Charging light.
Camera front, side, and bottom
1
2
3
8
7
6
5 4
1
2
3
4
5
6
7
8
Flash.
Self-Timer light (see
Using the Self-Timer mode on page 16 ).
Microphone.
USB connector.
Power adapter connector.
Tripod mount.
Dock connector.
Battery/Memory card door.
Camera dock insert
If you purchase a dock, it will come with multiple clear inserts. When setting up an optional dock for use with this camera, use the dock insert with the square green tag. See the dock User Guide for instructions.
Before taking pictures
Complete the following procedures before taking pictures or recording video clips.
Install the batteries
1.
Open the Battery/Memory card door by sliding the latch as indicated on the Battery/Memory card door.
2.
Insert the batteries.
3.
Close the Battery/Memory card door.
Note
Turn the camera off before removing the batteries. If using rechargeable NiMH batteries, fully charge the batteries before using them the first time (see
).
Charge the batteries
You can charge batteries in the camera using an optional AC power adapter, in the extra battery bay of an optional HP Photosmart camera dock or wireless dock base, or in an optional HP Photosmart quick recharger.
Connect the optional AC power adapter to the camera, then plug it in to an electrical outlet. If you are using a camera dock or wireless dock base, plug in the dock, then dock the camera.
The camera’s blinking Battery Charging light indicates that the battery is charging (if you are charging in an optional HP Photosmart Premium dock or wireless dock base, the dock's Battery Charging light blinks). The battery is fully charged when the Battery Charging light turns on solid (approximately 12–15 hours).
Turn on the camera
To turn on the camera, press the button.
Choose the language
Use to choose the language you want, then press .
To change the language later, use the Setup menu (see
Using the Setup Menu on page 31 ).
7
Chapter 1
Set the region
Along with the Language setting, the Region setting determines the default date format and the format of the video signal for displaying camera images on a television when connected through an optional
HP Photosmart Premium dock or wireless dock base
(see Using the Setup Menu on page 31 ).
Use
.
to choose the region you want, then press
Set the date and time
1.
Use to adjust the highlighted value.
2.
Use to move to the other selections and repeat
Step 1 until the date and time are set correctly.
3.
Press when the date, time, and format settings are correct, then press again to confirm.
To change the date and time later, use the Setup
Menu (see Using the Setup Menu on page 31 ).
Install and format an optional memory card
1.
Turn off the camera and open the Battery/Memory card door.
2.
Insert the memory card in the smaller slot as shown.
Make sure the memory card snaps into place.
3.
Close the Battery/Memory card door and turn on the camera.
Always format memory cards before first use.
1.
With the camera turned on, press until appears briefly in the upper right corner of the Image Display. This indicates you are in Playback.
2.
Press .
3.
Use
4.
Use
to select Format Card, then press
to select Yes, then press
.
to format the card.
Note
Once you install a memory card, all new images and video clips are stored on the card, rather than in internal memory. To use internal memory and view images stored there, remove the memory card. To transfer images from internal
memory to an optional memory card, see Move Images to Card under
Design Gallery Menu on page 22 .
For information about supported memory cards, see Storage on page 43 .
Install the software
The HP Photosmart Software provides features for transferring images and video clips to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, adjust image quality, add colors and special effects, and more). See
About the HP Photosmart Software on page 9 .
Note
If you have trouble installing or using the HP Photosmart Software, see the HP Customer Care website for more information: www.hp.com/support .
Windows
If your Windows computer does not meet the system requirements as stated on your camera packaging, HP Photosmart Essential is installed (see
1.
Close all programs and temporarily disable any virus protection software.
2.
Insert the HP Photosmart Software CD into the CD drive and follow the on-screen instructions. If the installation screen does not appear, click Start, click Run, type
D:\Setup.exe, where D is the letter of your CD drive, then click OK.
3.
When the software has finished installing, re-enable virus protection software.
Macintosh
1.
Insert the HP Photosmart Software CD into the CD drive.
2.
Double-click the CD icon on the computer desktop.
3.
Double-click the installer icon, then follow the on-screen instructions.
About the HP Photosmart Software
The CD that came with your camera contains the following versions of HP Photosmart
Software:
● HP Photosmart Premier Software (for Windows XP and XP x64 systems with at least
128 MB of RAM). This version of the software includes some extra features that let you use Photosmart Express to e-mail images to addresses you specify, create online albums, and automatically print selected images when you connect your camera to your computer. See
Using HP Photosmart Express on page 28 .
● HP Photosmart Essential Software (for Windows 98, 98SE, Me, and 2000 systems, and for Windows XP systems with less than 128 MB of RAM). This version does not have the extra features specified in HP Photosmart Premier Software.
● HP Photosmart Mac Software (for Macintosh systems).
To learn more about the software features and how to use them, see the Help feature in the HP Photosmart Software.
Using your camera
Now that you’ve completed setup, you can take and review still images and video clips.
For information on taking still pictures and capturing video clips
See
Taking still pictures on page 11
and
Recording video clips on page 12
For information on reviewing images and video clips on the camera
See
Reviewing images and video clips
9
Chapter 1
(continued)
For information on enhancing your images See
For information on transferring images from your camera to a computer
For information on printing images
See
See
HP Photosmart Software on page 25
Printing images from the camera
Tip
To switch between Live View and Playback, press .
2
Taking pictures and recording video clips
Live View allows you to frame pictures and video clips in the Image Display. To activate
Live View, press until appears briefly in the upper right corner of the Image
Display. The Live View display looks like this:
1
2
3
4
5
12
Shooting mode indicator.
Battery level indicator (see
).
Memory card indicator.
Pictures remaining count.
Focus brackets (see Auto focus and exposure on page 12 ).
Taking still pictures
You can take a picture almost any time the camera is on, regardless of what is shown on the Image Display.
1.
Press until appears briefly in the upper right corner of the Image Display.
This indicates you are in Live View.
2.
Frame the subject for your picture.
3.
Press the Shutter button halfway down to measure and lock the focus and exposure. The focus brackets in the
Image Display turn solid green when focus is locked (see
Auto focus and exposure on page 12
).
4.
Press the Shutter button all the way down to take the picture.
5.
To add an audio clip, continue holding the Shutter button down, then release it when done.
11
Chapter 2
Recording video clips
1.
Press until appears briefly in the upper right corner of the Image Display.
This indicates you are in Live View.
2.
Frame the subject.
3.
Press and release the Video button.
4.
To stop recording video, press and release the Video button again.
Instant Review
After you have taken a still image or recorded a video clip, the camera displays it briefly in Instant Review. If you want to delete the image or video clip, press , select This
Image from the Delete sub-menu, then press .
Note
To hear audio associated with still images or video clips, transfer them to your computer using the HP Photosmart Software or use an optional
HP Photosmart dock to connect the camera to a TV.
Auto focus and exposure
When you press the Shutter button halfway down, the camera automatically measures and locks the focus and exposure. When you auto focus:
Indicator
Green focus brackets
Red focus brackets
(shaking hand icon)
Description
Focus found.
Focus not found (see
Tip
If you follow the suggestions for focus and exposure and your image does not appear to be in proper focus or exposure when viewed in Playback, see the topics on blurry, dark, light, or grainy images in
Focusing on the subject
When you press the Shutter button halfway down, the camera searches for focus within the focus brackets.
When it finds focus, the focus brackets turn green.
If the focus brackets do not frame your subject, use
Focus Lock (see
Using Focus Lock on page 13 ).
Optimizing focus
When the camera cannot auto focus, the focus brackets turn red. This indicates the picture may be out of focus because the subject is out of the focus range or the scene has low contrast.
If the camera is set to a shooting mode (see
Using the shooting modes on page 15
) other than Macro and cannot focus, it will still take the picture. Try releasing the
Shutter button, reframing, and then pressing the Shutter button halfway down again. If the focus brackets are still red:
● Select a shooting mode more appropriate for the scene you are capturing (see
the shooting modes on page 15 ).
● If the scene has low contrast, use Focus Lock (see
) and aim at a point on the subject that has more colors or crisp edges.
● If the subject is too close (less than 500 mm or 20 in), move farther away from the subject or use Macro (see Macro under
).
If the camera is set to Macro and cannot focus, the camera will not take the picture.
Try one of the following:
●
Move within the Macro range or set the camera to Auto (see Auto under
Using the shooting modes on page 15 ).
● In low contrast scenes, use Focus Lock (see
Using Focus Lock on page 13 ).
Using Focus Lock
Use Focus Lock to focus on a subject that is not in the center of the picture, to capture action shots more quickly by pre-focusing in the area where the action will occur, or to focus in low light or low contrast situations.
1.
Frame the subject for your picture within the focus brackets. In low light or low contrast situations, frame a brighter or higher contrast object.
2.
Press the Shutter button halfway down.
3.
Hold the Shutter button halfway down and reframe.
4.
Press the Shutter button all the way down to take the picture.
Optimizing exposure
When you press the Shutter button halfway down, the camera also measures the light level to set the proper exposure.
If the camera is set to a shooting mode other than Fast Shot (see Fast Shot under
the shooting modes on page 15 ) and determines the scene will require a very long
13
Chapter 2 exposure, a shaking hand icon ( ) appears. The camera will take the picture, but it may be blurry because it is difficult to hold the camera still for the length of time required. Try one of the following:
●
Set the flash to Auto Flash or Flash On (see Setting the flash on page 15 ).
● Set the camera on a tripod or stable surface.
● Turn on more light.
If the camera is set to Fast Shot and determines there is not enough light, the message
NOT ENOUGH LIGHT FOR FAST SHOT appears in the Image Display and the camera will not take the picture. Try one of the following:
● Select a different shooting mode (see
Using the shooting modes on page 15 ).
● Turn on more light.
Using zoom
Your camera has both optical and digital zoom. Optical zoom physically extends the lens to make the subject of your picture appear closer. After you have extended the lens fully using optical zoom, the camera employs digital zoom. Digital zoom uses no moving lens parts.
Tip
The more you zoom in on the subject of your picture, the more small movements of the camera are magnified (this is called camera shake). If
appears when you press the Shutter button halfway down, the picture may be blurry. Be sure to hold the camera still or add more light to the scene. Try holding the camera closer to your body or against a steady object, or set the camera on a tripod or stable surface.
Optical zoom
Optical zoom moves the lens between wide angle (1x) and telephoto (3x).
In Live View, use the buttons on the Zoom lever to control zoom.
Press to zoom in and to zoom out.
Digital zoom
In digital zoom, the Image Display shows a yellow frame around the scene.
1.
In Live View, press on the Zoom lever to optically zoom to the maximum level, then release the lever.
2.
Press and hold until the image you want to capture fills the yellow frame. If you zoom in too far, press .
3.
To return to optical zoom, press until digital zooming stops. Release , then press it again.
Note 1
Digital zoom is not available when recording video clips.
Note 2
Digital zoom reduces the resolution of an image, so your picture may be more grainy than the same picture taken with optical zoom. When you need higher quality, limit the use of digital zoom.
Setting the flash
To select a flash setting, press , use to highlight the desired flash mode, then press .
Auto Flash (Default)—The camera uses the flash if necessary.
Red-Eye—The camera uses the flash with red-eye reduction, if necessary, to minimize the possibility of human eyes appearing red in the final image. For
information about red-eye, see Red eye on page 15 .
Flash On—The camera always uses flash. If the light is behind your subject, use this setting to increase the light on the front of your subject.
Flash Off—The camera does not use flash. Use this setting to capture poorly lit subjects beyond the flash range or to capture scenes with the existing light.
The Flash setting remains in effect until it is changed again, or you turn off the camera.
Note
The flash is not available in Burst, Fast Shot, Landscape, or Sunset shooting modes, nor while recording video clips. In Night Portrait shooting mode, the flash is set to Red-Eye.
Red eye
The red-eye phenomenon is caused when light from the flash reflects off the subjects' eyes, which can make human eyes appear red in the captured image. Using Red-
Eye causes the camera to flash quickly up to three times to shrink the subject's pupils
(reducing the effect of the red-eye phenomenon) before using the main flash and capturing the image. Since it takes longer to take a picture using this setting, make sure your subjects wait for the additional flashes.
Using the shooting modes
Shooting modes are predefined settings for everyday situations. They are optimized for particular types of scenes or shooting situations.
To select a shooting mode, press while in Live View, use mode, then press .
to highlight a shooting
Auto Mode (Default)—For taking good shots quickly, when you do not have time to select a special shooting mode.
Self-Timer—For capturing images or recording video after a 10-second delay
(see
Using the Self-Timer mode on page 16
).
Fast Shot—For taking images more quickly than in Auto mode in bright light conditions when the subject is a moderate to long distance away.
15
Chapter 2
(continued)
Landscape—For scenes with deep perspective, such as mountain scenes.
Portrait—For pictures that have one or more people as their primary subject.
Action—For capturing sporting events, moving cars, or any scene where you want to stop the action.
Night Portrait—For capturing images of people at night. This mode uses the flash and a long exposure. As a result, you must set the camera on a tripod or stable surface.
Beach and Snow—For capturing scenes against bright backgrounds such as at the beach or in snow.
Sunset—For capturing outdoor scenes at sunset.
Burst—For taking two or more shots quickly in succession (see
Macro—For taking close-up pictures of subjects between 100 and 800 mm
(3.9 to 31.5 in) away.
Note
The shooting modes do not apply when you are recording video clips.
The shooting mode remains in effect until it is changed again, or until you turn off the camera.
Using the Self-Timer mode
The Self-Timer allows you to take an image or video clip 10 seconds after pressing the Shutter or Video button.
1.
Press while in Live View, use to highlight Self-Timer , then press .
2.
Set the camera on a tripod or stable surface.
3.
Frame the subject in the Image Display.
4.
The next steps depend on whether you are taking a still pictures or recording a video clip.
a.
For still pictures, press the Shutter button halfway down to lock focus and exposure. When the focus brackets turn green, press the Shutter button all the way down.
b.
For video clips, press the Video button, then release it.
5.
The camera begins the 10-second countdown, then takes the still image or begins recording the video clip.
6.
If you are recording a video clip, press the Video button to stop recording.
Tip
If you want to include yourself in the picture, press the Shutter button all the way down, then place the camera on a tripod or stable surface. The camera locks focus and exposure just before the end of the countdown, allowing you time to place yourself in the scene.
Note
To add audio to images taken with the Self-Timer setting, see
The Self-Timer setting resets to the default Auto shooting mode after the picture or video clip is taken.
Using the Burst mode
Burst allows you to take two or more pictures as quickly as possible when you press and hold the Shutter button all the way down.
1.
Press while in Live View, use to highlight Burst , then press .
2.
Frame the subject, then press the Shutter button halfway down to lock the focus and exposure. Then press the Shutter button all the way down and hold it. The camera takes pictures as quickly as possible until you release the Shutter button or the camera runs out of memory.
The Image Display remains off during the burst capture. After the burst images have
been taken, each image appears one at a time in Instant Review (see
). You can delete the entire burst sequence in Instant Review. To delete
individual images, see Deleting images on page 21
.
Note
To add audio to images taken with the Burst setting, see
The Burst setting remains in effect until it is changed again, or until it resets to the default
Auto shooting mode when you turn off the camera.
Using the Capture Menu
The Capture Menu allows you to adjust camera settings that affect the characteristics of the images and video clips you capture.
1.
While in Live View or Playback, press , then use to highlight .
2.
Use to highlight a menu option, then press to display the menu option’s sub-menu.
3.
Use to highlight a setting, then press .
4.
Press to exit the Capture Menu.
For on-camera information about an option, use sub-menu, then press .
to highlight Help... in the option's
Shooting Modes—For selecting a shooting mode. For information about shooting modes and another way to select them, see
.
Image Quality—Sets resolution and compression for images. The greater the number, the higher the resolution.
M525:
● 6MP Best—For enlarging or printing images greater than 28 x 36 cm (11 by 14 in).
● Normal (6MP) (Default)—For printing images up to 28 x 36 cm (11 by 14 in).
17
Chapter 2
(continued)
● 4MP—For printing images up to 20 x 25 cm (8 by 10 in).
● 2MP—For printing images up to 13 x 18 cm (5 by 7 in).
● VGA—For sending images via e-mail or posting them to the Internet.
M425:
● 5MP Best—For enlarging or printing images greater than 28 x 36 cm (11 by 14 in).
● Normal (5MP) (Default)—For printing images up to 28 x 36 cm (11 by 14 in).
● 3MP—For printing images up to 20 x 25 cm (8 by 10 in).
● 1MP—For printing images up to 10 x 15 cm (4 by 6 in).
● VGA—For sending images via e-mail or posting them to the Internet.
Date & Time Imprint—Imprints date in lower left corner of image.
● Off (Default)—No date or time imprinted on the image.
● Date Only—Date permanently imprinted.
● Date & Time—Date and time permanently imprinted.
Exposure Compensation—Overrides the camera’s automatic exposure
setting. For more information, see Exposure Compensation on page 18
.
● To make the images you are about to capture brighter, press to increase the value.
● To make the images you are about to capture darker, press to decrease the value.
White Balance—Balances color based on lighting conditions. For more information, see
● Auto (Default)—Corrects for scene illuminance. For general picture taking.
● Sun—For outdoor scenes in sunny or cloudy conditions.
● Shade—For outdoor scenes in shade or at dusk.
● Tungsten—For indoor scenes with incandescent or halogen lighting.
● Fluorescent—For indoor scenes with fluorescent lighting.
ISO Speed—Adjusts the camera’s sensitivity to light. For more information,
.
● Auto (Default)—Camera selects the best ISO speed for scene.
● ISO 100—For best quality.
● ISO 200—For lower light conditions.
● ISO 400—For lower light conditions and/or action when short shutter speeds are desired.
Note
Some Capture Menu options are not available in certain shooting modes.
In addition, some do not apply when recording video clips.
Exposure Compensation
You can use Exposure Compensation to override the camera's automatic exposure setting. Exposure Compensation is useful in scenes that contain many light objects
(like a white object against a light background) or many dark objects (like a black object against a dark background). Such scenes could turn out gray without the use of
Exposure Compensation. For a scene with many light objects, increase the Exposure
Compensation to a positive number. For a scene with many dark objects, decrease the
Exposure Compensation.
White Balance
Different lighting conditions cast different colors. This setting allows the camera to compensate for this, reproducing colors more accurately and ensuring that whites appear white in the final image. You can also adjust the white balance to produce creative effects.
For example, the Sun setting produces a warmer look to the image.
ISO speed
This setting adjusts the sensitivity of the camera to light. When ISO Speed is set to the default Auto setting, the camera selects the best ISO speed for the scene.
Lower ISO speeds capture images with the least amount of grain (or noise), but result in slower shutter speeds. If taking a picture in low light conditions without a flash at ISO
100, use a tripod.
Higher ISO numbers allow faster shutter speeds, and can be used when taking pictures in dark areas without a flash, or when taking pictures of fast moving objects. Higher ISO speeds produce pictures with more grain (or noise) and, therefore, can be of lower quality.
19
3
Reviewing images and video clips
You can review and manipulate images and video clips in Playback as described here.
For information about enhancing images, see
.
1.
Press until appears briefly in the upper right corner of the Image Display.
2.
Use to scroll through your images and video clips (video clips play automatically).
When viewing video clips, press to pause the clip, then use to scroll through the individual frames.
3.
To switch to Live View, press .
During Playback, the Image Display also indicates additional information about each image or video clip.
1
2
3
4
5
6
3
0:15
1
Battery indicator (see
Power indicators on page 39 ).
Memory card indicator.
Number of electronic Photosmart Share destinations (see
Using HP Photosmart Express on page 28 ).
Number of images to print (see
● Recorded length of this audio or video clip.
● Audio clip attached.
● Video clip indicator.
1 of 30
Number of this image or video clip out of the total number of stored images and video clips.
Deleting images
To delete a displayed image during Playback:
1.
Press .
2.
Use to select an option, then press .
– Cancel—Returns to Playback without deleting the displayed image.
– This Image—Deletes the image or video clip.
– All Images (in Memory/on Card)—Deletes all stored images and video clips.
– Format (Memory/Card)—Deletes all stored files, then formats the internal memory or memory card.
Viewing thumbnails
1.
While in Playback, press Thumbnails to view thumbnails.
2.
Use and to scroll through the thumbnails.
3.
Press to exit Thumbnails.
Magnifying images
This feature is for viewing purposes only; it does not permanently alter the image.
1.
While in Playback, press (same as Zoom In on the Zoom lever). The currently displayed image is magnified 2x.
2.
Use and to pan around the magnified image.
3.
Use and to change the magnification.
4.
Press to return to Playback.
21
4
Using the Design Gallery Menu
You can use the Design Gallery features to enhance your captured images.
1.
While in Playback, use to scroll to an image, then press .
2.
Use to highlight the Design Gallery Menu tab.
3.
Use to highlight an option, then press and follow the on-screen instructions.
Remove Red Eyes—See
Removing red eyes on page 22 .
Modify Color—See
Add Borders—See Adding borders on page 23 .
Rotate—Rotates images in 90-degree increments.
Use to rotate the image clockwise or counter-clockwise in 90-degree increments. Press to save the image in the new orientation.
Record Audio—See
Move Images to Card—Moves images from internal memory to a memory card. Available only if there are images in internal memory and a memory card is inserted.
To move images, select this option and follow the on-screen prompts.
Removing red eyes
When you select Remove Red Eyes, the camera processes the current still image to remove red eyes from the subjects.
Note
To prevent red eyes in images, see Red-Eye under
.
The red-eye removal process takes a few seconds, after which the image displays with green boxes around corrected areas, along with the Remove Red Eyes sub-menu:
● Save Changes (Default)—Overwrites the original image and returns to the Design
Gallery Menu.
● View Changes—Displays a magnified view of the image with green boxes around the corrected areas.
● Cancel—Returns to the Design Gallery Menu without saving the red eye changes.
Remove Red Eyes is only available for still images taken with a flash.
Modifying colors
Modify Color allows you to apply color schemes to the displayed image. To modify colors:
1.
Use to select Modify Color, then press .
– Cancel—Returns to the Design Gallery Menu without saving changes.
– Black & White—Converts color images to black and white.
– Sepia—Converts image to a brownish tone to look old-fashioned.
– B&W Tints—Applies color tones to a black and white version of an image.
2.
Use to select a color scheme and preview the effect it has on the image.
– Cancel—Returns to the Design Gallery Menu without saving changes.
– Black and White—Converts color images to black and white.
– Sepia—Converts image to a brownish tone to look old-fashioned.
– B&W Tints—Applies color tones on a black and white version of an image.
3.
Press to select the color scheme and display the Creative sub-menu.
Follow the on-camera instructions to adjust the color.
4.
Press to save a copy of the image with the specified color scheme and return to the Design Gallery Menu. Press
Modify Color sub-menu.
to exit without saving and return to the
Adding borders
Add Borders allows you to add a predefined border to the displayed image. To add a border:
1.
Use to select Add Borders, then press .
2.
Use to select a border type and preview the effect it has on the image.
– Cancel—Returns to the Design Gallery Menu without saving changes.
– Soft Edge—Applies a soft, vignetted frame to the image.
– Inset Border—Image extends beyond the inset frame.
– Oval—Adds an oval matte border with beveled edges.
– Circle—Adds a circular matte border with beveled edges.
– Rectangle—Adds a rectangular matte border with sharp corners.
– Rounded Rectangle—Uses a rectangle with soft corners for the matte border.
– Square—Adds a square matte border with beveled edges.
3.
Press to select the border and display the Creative sub-menu.
Follow the on-camera instructions to adjust the border.
4.
Press to save a copy of the image with the specified border and return to the
Design Gallery Menu. Press
Borders sub-menu.
to exit without saving and return to the Add
Recording audio
Record Audio allows you to record an audio clip and attach it to an existing image.
1.
Select Record Audio to immediately start recording.
2.
To stop recording and attach the audio clip to the displayed image, press .
3.
To hear audio associated with still images or video clips, transfer them to your computer using the HP Photosmart Software or use an optional HP Photosmart dock to connect the camera to a TV.
23
Chapter 4
If the currently displayed image already has an audio clip attached to it, the Record
Audio sub-menu displays instead when you select Record Audio.
● Keep Current Clip—Retains the current audio clip and returns to the Design
Gallery Menu.
● Record New Clip—Records a new audio clip, replacing the previous audio clip.
● Delete Clip—Deletes the current audio clip and returns to the Design Gallery
Menu.
5
Transferring and printing images
You can transfer images and video clips with or without the HP Photosmart Software that came with your camera. However, the HP Photosmart Software has several features for transferring and managing your images and also guides you through the transfer process.
Transferring images with HP Photosmart Software
If you have installed the HP Photosmart Software (see
Install the software on page 8
), use this method to transfer images and video clips to your computer.
Tip
You can also perform this task using an optional HP Photosmart dock (see the dock User Guide).
1.
If you have selected images for sharing or printing (see
Express on page 28 ), verify that the computer is connected to a printer and/or
the Internet.
2.
Connect the camera and computer using the USB cable that came with your camera.
3.
Turn on the camera and follow the instructions on the computer screen to transfer the images. For more information, see the Help feature in the
HP Photosmart Software.
Transferring images without HP Photosmart Software
If you do not install the HP Photosmart Software:
● You cannot use the Share features or Buy Prints Online on the camera's
Photosmart Express Menu (see
Using HP Photosmart Express on page 28
).
● Images marked for printing do not automatically print when the camera is connected to the computer.
However, you can still transfer images and video clips to your computer by:
● Connecting your camera directly to the computer (see
)
● Using a memory card reader (see
Using a memory card reader on page 26
)
25
Chapter 5
Connecting to the computer
1.
Turn off the camera, connect it to the computer using the USB cable that came with your camera, then turn on the camera.
– On Windows computers, the camera appears as a device in Explorer, allowing you to copy images from the camera to the computer.
– On Macintosh computers, either Image Capture or iPhoto starts automatically, allowing you to transfer images to the computer.
2.
When you have finished transferring images, disconnect the camera from the computer. If your computer is running Windows 2000 or XP and you get an Unsafe
Removal warning, disregard the warning.
If you encounter problems, set the camera’s USB Configuration to Disk Drive (see
USB Configuration under
Using the Setup Menu on page 31 ) and reconnect to your
computer.
Note
On Macintosh computers, if you set the camera to Disk Drive and neither
Image Capture nor iPhoto starts automatically, look on the desktop for a disk drive icon with the label HP_M425 or HP_M525 and copy the images manually. For more information about how to copy files, visit Mac help.
Using a memory card reader
You can put your camera’s optional memory card into a (separately purchased) memory card reader. Some computers and HP Photosmart printers have built-in memory card slots which act as a memory card reader.
For Windows computers:
1.
Insert your camera’s memory card into the memory card reader (or into your computer’s memory card slot).
2.
Right-click My Computer on your desktop, then select Explore.
3.
Expand the removable drive folder, expand the DCIM folder, then click on the folder for your camera.
4.
Select and copy all the images to a folder on your computer.
5.
After verifying that the images were successfully transferred, return the memory card to your camera.
For Macintosh computers:
1.
Insert your camera’s memory card into the memory card reader (or into your computer’s memory card slot).
2.
Either the HP Photosmart Software, Image Capture, or iPhoto starts automatically and guides you through the process of transferring images.
If no application starts automatically or if you want to copy the images manually, look on the desktop for the disk drive icon for the memory card, then copy the images to your local hard drive. For more information about how to copy files, visit Mac help.
Printing images from the camera
You can connect the camera to any PictBridge-certified printer to print still images.
1.
Check that the printer is turned on, there is paper in the printer, and
there are no printer error messages.
2.
Verify that the camera's USB Configuration is set to Digital Camera (see USB
Configuration under Using the Setup Menu on page 31 ).
3.
Connect the camera and printer using the
USB cable that came with your camera, then turn on the camera.
4.
When the camera is connected to the printer, the Print Setup Menu displays on the camera. To change the settings, use on the camera to select a menu option, then use on the camera to change the setting.
5.
Press to begin printing.
Note
If you connect the camera to a non-
HP printer and encounter problems with printing, contact your printer manufacturer. HP does not provide customer support for non-HP printers.
27
6
Using HP Photosmart Express
With HP Photosmart Express, you can select still images in your camera to print
automatically (see Selecting images for printing on page 29 ) or to purchase prints
online (see
Buying prints online on page 30 ) the next time you connect the camera
to your computer or printer. You can also customize the Photosmart Express Menu to include e-mail addresses, group distribution lists, online albums, or other online services that you specify. To customize the Photosmart Express Menu:
1.
Set up your custom destinations on your camera (see
Setting up online destinations
).
2.
Select images in your camera to send to online destinations (see
to online destinations on page 29 ).
You must have the HP Photosmart Software, either HP Photosmart Premier (Windows) or HP Photosmart Mac (Macintosh), on your computer to use some features in the
Photosmart Express Menu. For information about this software, see
HP Photosmart Software on page 9
.
Note
Available online services vary by country or region. Visit www.hp.com/go/ sharing .
Using the Photosmart Express Menu
To display the Photosmart Express Menu, press . To select a menu option, use
to highlight a selection, then press .
Print—Allows you to select images and specify number of copies to print. See
Selecting images for printing on page 29 .
Buy Prints Online—Specifies images to request from an online printing
service. See Buying prints online on page 30
.
Share Menu Setup—Adds share destinations. See
destinations in the camera on page 28 .
Setting up online destinations in the camera
You can specify up to 34 destinations of your choice (such as individual e-mail addresses or group distribution lists) in the Photosmart Express Menu.
1.
Verify that your computer is connected to the Internet.
2.
Turn on the camera, then press .
3.
Highlight Share Menu Setup..., then press .
Connect the camera to your computer using the USB cable that came with your camera. Follow the instructions in the Share dialog box to set up destinations in your camera.
4.
Disconnect the camera from the computer, then press to verify that the new destinations are now in the camera.
Sending images to online destinations
1.
Turn on the camera, then press .
2.
Use to highlight the first destination.
3.
Use to select a still image that you want to send, then press to select it. A appears over the destination in the Photosmart Express Menu. To deselect the destination, press again.
4.
Use to highlight the next destination, then press . Repeat Step 3 to continue selecting images to send.
5.
To exit the Photosmart Express Menu, press
.
6.
Connect the camera to your computer using the USB cable that came with your camera. The images are automatically sent to their destinations.
Selecting images for printing
1.
Turn on the camera, then press .
2.
Use to highlight Print.
3.
Use to display an image you want to mark for printing, then press to display the Print submenu.
4.
Use to specify the number of copies to print
(up to 99), then press . To deselect Print, select
Print again, set the number of copies to 0, then press .
5.
To select additional images to mark for printing, use to display an image, press , and repeat
6.
Step 4.
To exit the Photosmart Express Menu, press .
7.
Connect the camera to a PictBridge-certified printer using the USB cable that came with your camera. The images you selected are automatically printed.
29
Chapter 6
Buying prints online
You can select images you want as prints and order them online.
1.
Verify that your computer is connected to the Internet.
2.
Turn on the camera, then press .
3.
Use to highlight Buy Prints Online.
4.
For each image you want to order as a print, use to display the image, then press . A appears over Buy Prints Online in the Photosmart Express
Menu. To deselect the image, press again.
5.
Turn off the camera, connect it to your computer using the USB cable that came with your camera, then turn on the camera. Follow the instructions in the Buy Prints
Online dialog box to purchase prints.
6.
Disconnect the camera from the computer.
7
Using the Setup Menu
The Setup Menu allows you to set preferences for the camera’s behavior.
1.
While in Live View or Playback, press , then use to highlight .
2.
Use to highlight a menu option, then press to display the menu option’s sub-menu.
3.
Use to highlight a setting, then press .
4.
To exit the Setup Menu, press .
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
● Low—For extending battery life.
● Medium (Default)—For normal viewing conditions.
● High—For very bright lighting conditions.
Camera Sounds—Turns the camera sounds (such as button presses and shutter clicks) off and on.
On (Default), Off.
Date & Time—Sets the date and time. See
Set the date and time on page 8
.
USB Configuration—Specifies how a computer recognizes the camera. See
Connecting to the computer on page 26 .
● Digital Camera (Default)—Recognizes the camera as a digital camera using PTP (Picture Transfer Protocol).
● Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass
Storage Device Class).
TV Configuration—Sets the video signal format for displaying camera images on a TV.
● NTSC—Used primarily in North America, parts of South America, Japan,
Korea, and Taiwan.
● PAL—Used primarily in Europe, Uruguay, Paraguay, Argentina, and parts of Asia.
(Language)—Sets the language. See
31
8
Troubleshooting
Use this section to find information on:
●
Resetting the camera (see Resetting the camera on page 32 )
● Possible problems and solutions (see
Problems and solutions on page 32 )
Resetting the camera
If your camera does not respond when you press buttons, reset the camera.
1.
Turn off the camera.
2.
Remove the memory card and batteries, and disconnect the camera from AC power for at least 5 seconds.
3.
Reinsert the batteries and close the Battery/Memory card door.
4.
After verifying that the camera works without an optional memory card, reinsert the memory card (if you were using one).
You can also reconnect AC power if you choose.
Resetting the camera returns all settings to their factory defaults. Any images or video clips stored in memory are retained.
Problems and solutions
Use this information to find solutions to common issues you may have using your camera.
The camera does not turn on.
● Install new or recharged batteries, ensuring that the batteries are inserted correctly
(see Install the batteries on page 7 ). If you are using rechargeable batteries, ensure
they are rechargeable Nickel Metal Hydride (NiMH) batteries.
● Ensure that the HP AC power adapter is connected to the camera (directly or through an optional dock) and is plugged into a working electrical outlet. Ensure that the
HP AC power adapter is not damaged or defective.
● Reset the camera (see
Resetting the camera on page 32 ).
● Ensure that the memory card is the proper type (see
). If so, remove the memory card and turn on the camera; if the camera turns on, format the memory card (see
Install and format an optional memory card on page 8 ). If the
camera still does not turn on, format the memory card using a memory card reader, or replace the memory card.
I have to recharge the NiMH batteries frequently.
● See
Extending battery life on page 38 .
● New batteries or batteries that have not been charged recently must be recharged to reach full capacity.
● If you have not used the batteries for two months or longer, recharge them.
The NiMH batteries will not charge.
● Try charging the batteries again after they have drained awhile.
● Use only the approved HP AC power adapter.
● If charging the batteries in the HP quick recharger or the spare battery charging bay of an optional HP Photosmart dock does not work, replace the batteries.
The camera does not turn on when I connect to AC power, then disconnect, then reconnect.
● Insert batteries into the camera.
● Reset the camera (see
Resetting the camera on page 32 ).
● The AC power adapter could be malfunctioning. Try connecting to a different compatible AC power adapter.
● Try plugging the AC power adapter into a different electrical outlet.
The camera does not respond when I press a button.
● Turn on the camera.
● Most of the camera buttons do not respond when the camera is connected to a computer (directly or through an optional dock).
● Replace or recharge the batteries.
● Reset the camera (see
Resetting the camera on page 32 ).
● Check to see if the memory card is defective. If so, replace the memory card.
●
Format the internal memory and/or the memory card (see
optional memory card on page 8
).
The camera does not take a picture when I press the Shutter button.
● Press the Shutter button all the way down.
● The memory card or internal memory may be full. Transfer images from the camera
to your computer, then format the internal memory or the memory card (see
and format an optional memory card on page 8 ). Or replace the card with a new one.
● The camera may be processing. Wait a few seconds for the camera to finish processing the last image before taking another picture.
The Image Display is not working.
● The Image Display may have timed out. Press any camera button to wake up the camera.
● Replace or recharge the batteries. If the Image Display does not turn on, remove the batteries and connect to AC power (directly or through the optional dock). If the
Image Display still does not turn on, reset the camera (see
).
My image is blurry.
●
Use Focus Lock (see Using Focus Lock on page 13 ).
● Use a tripod to hold the camera steady, or improve lighting conditions.
●
Set the flash to Auto Flash or Flash On and set the shooting mode to
Action.
33
Chapter 8
My image is too bright.
●
Turn the flash off (see Setting the flash on page 15 ).
● Move back from the subject and use zoom.
● Adjust Exposure Compensation (see Exposure Compensation under
My image is too dark.
● Wait for natural lighting conditions to improve, use the flash (see
), or add indirect lighting.
● Adjust Exposure Compensation (see Exposure Compensation under
My image is grainy.
● Use a lower ISO Speed setting (see ISO Speed under
).
●
Add indirect lighting, use the flash (see Setting the flash on page 15 ), or wait for
natural lighting conditions to improve.
● If the camera is warm, the effect will diminish as the camera cools. For best image quality, avoid storing the camera in very hot locations.
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory.
The Power light is on but the Image Display is off.
● Reset the camera (see
Resetting the camera on page 32 ).
●
Press Live View/Playback to reactivate the Image Display.
The camera responds sluggishly when trying to review images.
See
Storage on page 43 and Memory capacity on page 43 for tips about memory
cards.
Video recording terminates abruptly. The video is saved successfully, but it is shorter than expected.
Replace your memory card with a faster card. Look for cards marked High Performance,
Pro, Ultra, or High Speed.
Video recording terminates abruptly and the video will not play back.
Reformat the card (see
Install and format an optional memory card on page 8
).
The camera gets warm (or even hot) to the touch.
This is normal. However, if anything seems out of the ordinary, turn off the camera, remove it from AC power, and allow the camera to cool. Then examine the camera and the batteries for signs of possible damage.
For best image quality, turn off the camera when not using. Always store the camera in a cool place.
My camera stalls when establishing a connection to the computer.
● Ensure that the USB cable is properly connected to the camera and computer.
● Try connecting the USB cable to another USB port on the computer.
● Turn the camera off, then on again. If that does not fix the problem, reset the camera
(see
Resetting the camera on page 32
).
● If the problem persists, contact HP Support (see
).
I cannot transfer images from the camera to my computer.
● Either install the HP Photosmart Software (see
Install the software on page 8 ), or
see Transferring images without HP Photosmart Software on page 25
.
●
Set your camera to act as a Disk Drive (see
).
I get an error message when transferring images to my computer.
Close the HP Photosmart Transfer Software, remove the camera from the optional dock or disconnect the camera from the USB cable and reset the camera (see
). Then, restart the image transfer process (see
with HP Photosmart Software on page 25
).
I am having a problem installing or using the HP Photosmart Software.
● Make sure your computer meets the minimum system requirements as listed on your camera packaging.
● Refer to the HP Customer Care website: www.hp.com/support .
How can I get professional-quality prints if I don’t have a photo printer?
Use the Buy Prints Online feature on the Photosmart Express Menu (see
35
9
Product support
Use this section to find support information for your digital camera, including links to helpful websites and an overview of the support process.
Helpful websites
Camera tips, product registration, newsletter subscriptions, driver and software updates, purchase HP supplies and accessories www.hp.com
www.hp.com/photosmart (English only)
Customers with disabilities www.hp.com/hpinfo/community/accessibility (English only)
HP Customer Care, driver and software updates, support information www.hp.com/support
Getting assistance
To get the best from your HP product, consult the following standard HP support offerings:
1.
Consult the product documentation.
–
Review Troubleshooting on page 32
in this document.
– Review the electronic Help section within the software.
– Refer to the camera's Help screens.
2.
Visit HP online support at www.hp.com/support , or contact the store where you purchased this camera. HP online support is available to all HP customers.
HP online support is the fastest source of up-to-date product information and expert assistance, including:
– Fast e-mail access to qualified online support specialists.
– Software and driver updates for your camera.
– Valuable product and troubleshooting information for technical issues.
– Proactive product updates, support alerts, and HP newsletters (available when you register your camera).
3.
HP support by phone. Support options and fees vary by product, country, and language. For a list of support conditions and phone numbers, visit www.hp.com/ support .
4.
Post-warranty period. After the limited warranty period, help is available online at
www.hp.com/support .
5.
Extending or upgrading your warranty. If you would like to extend or upgrade your camera's warranty, please contact the store where you bought the camera or check the HP Care Pack offers at www.hp.com/support .
6.
If you already purchased an HP Care Pack Service, please check the support conditions on your contract.
37
A
Managing batteries
Your camera uses two AA batteries, either Alkaline, Photo Lithium, or rechargeable Nickel Metal
Hydride (NiMH). Alkaline batteries provide far less battery life than either Photo Lithium or NiMH batteries.
Top points about batteries
● Fully charge NiMH batteries before using them for the first time.
● Always insert the batteries in the camera correctly (see
Install the batteries on page 7 ). If the
batteries are inserted improperly, the compartment door may close but the camera will not operate.
● If you do not intend to use your camera for more than two months, remove the batteries unless you are using rechargeable batteries and are leaving the camera connected to an optional dock or HP AC power adapter.
● The performance of all batteries will decrease as the temperature drops. To improve battery performance, keep the camera or batteries stored in a warm inside pocket when in a cold environment.
Extending battery life
To conserve battery power, the Image Display turns off after a period of inactivity. Pressing any button wakes up the camera. After five minutes of inactivity, the camera turns off.
To further extend battery life:
● Set Display Brightness to Low (see Display Brightness under
).
● Set your camera to Auto Flash (see Auto Flash under
).
● Use optical zoom sparingly.
●
If you are turning on the camera only to view images, hold down camera to start in Playback without extending the lens.
while turning on the
● Connect the camera to the optional HP AC power adapter when you transfer or print.
Safety precautions for using batteries
● Always use two identical batteries of the same chemistry, brand, and age.
● Do not place batteries in fire or heat them. Always store charged batteries in a cool location.
● Do not connect the positive and negative terminals of the battery to each other with any metal object.
● Do not carry or store batteries with metal objects. Do not drop batteries into a change-filled pocket.
● Do not pierce batteries or subject them to strong impacts or shocks.
● Do not solder directly onto batteries.
● Do not allow batteries to get wet.
● Do not disassemble or modify batteries.
● Immediately discontinue use of a battery if, while using, charging, or storing the battery, the battery emits an unusual smell, feels excessively hot (note that it is normal for the battery to feel warm), changes color or shape, or appears abnormal in any other way.
● In the event batteries leak and the fluid gets into one’s eye, do not rub the eye. Rinse well with water and immediately seek medical care. If left untreated, the battery fluid could cause damage to the eye.
Power indicators
When the batteries are low or the camera is connected to AC power, one of the following icons appears in the Image Display. If no battery icon appears in Live View or Playback, the batteries have sufficient power to function normally.
Icon Description
Battery level is low. Camera will soon power down.
Battery is depleted. Camera will power down.
Blinking
Camera is operating on AC power.
Animated battery filling up
Camera is operating on AC power and is charging the battery.
Camera has successfully completed battery charging and is operating on AC power.
Note
If the camera is without batteries for a prolonged period, the clock may be reset and you may be prompted to update it the next time you power on the camera.
Number of shots per battery type
The following table shows the minimum, maximum, and average number of shots that may be obtained using Alkaline, Photo Lithium, and rechargeable NiMH batteries.
Battery Type
Alkaline
NiMH
Photo Lithium
Minimum
77
215
365
Number of Shots
Maximum Average
180
380
600
120
290
485
CIPA
80
205
423
For Minimum, Maximum, and Average numbers, four pictures are taken per session with at least a
5 minute break between sessions. In addition:
● The minimum number of shots is obtained with extensive use of Live View (30 seconds per picture), Playback (15 seconds per picture), and Flash On. Optical zoom (both directions) is used on 75% of the shots.
● The maximum number of shots is obtained with minimal use of Live View (10 seconds per picture) and Playback (4 seconds per picture). Flash and optical zoom (both directions) are used on 25% of the shots.
● The average number of shots is obtained with Live View used for 15 seconds per picture and
Playback used for 8 seconds per picture. Flash and optical zoom (both directions) are used on 50% of the shots.
● The CIPA number is obtained using the standards established by the Camera and Imaging
Products Association.
39
Appendix A
Battery performance
The following table shows how Alkaline, Photo Lithium, and rechargeable NiMH batteries perform in different types of use scenarios:
Type of Use Alkaline Photo
Lithium
Poor Fair
NiMH
Good Most economical if you take more than 30 pictures per month
Most economical if you take fewer than 30 pictures per month
Heavy use of flash, frequent pictures
Heavy use of video
Heavy use of Live View
Overall battery life
Low temperature/winter use
Infrequent use (without dock)
Infrequent use (with dock)
Want to recharge battery
Fair
Poor
Poor
Poor
Poor
Poor
Fair
Fair
No
Good
Good
Good
Good
Good
Good
Good
Good
No
Fair
Good
Good
Good
Fair
Fair
Fair
Good
Good
Recharging NiMH batteries
You can recharge NiMH batteries in the camera when the camera is connected to an optional HP AC power adapter. You can also charge the batteries in an optional HP Photosmart dock that has a battery bay or with an optional quick recharger.
The following table shows the average recharge time for a fully discharged battery, based on recharge location.
Signals Charge location
In camera with the HP AC power adapter connected
Average charge time
12–15 hours
In camera connected to the
HP AC power adapter through an HP Photosmart dock
12–15 hours
Charging: Camera's Battery Charging light blinks and the animated battery icon is displayed.
Charging complete: Camera's Battery Charging light turns on solid and the battery gauge changes to on the Image Display.
Charging: Dock's camera battery charging light blinks.
Charging complete: Dock's camera battery charging light turns on solid.
(continued)
Charge location
In battery bay of the HP
Photosmart 6221 Premium
Camera Dock
In HP Photosmart M-
Series quick recharger
Average charge time
2–3 hours
Signals
1 hour for 2 batteries.
About 2 hours for 4 batteries.
Charging: Dock's battery bay light blinks.
Charging complete: Dock's battery bay light turns on solid.
Charging: Quick recharger light is yellow.
Charging complete: Quick recharger light is green.
Safety precautions for recharging batteries
You can recharge the batteries in the camera or purchase an optional dock with battery bay or a quick recharger. These devices may be warm while charging NiMH batteries. This is normal.
However, you should follow the safety precautions below.
● Do not charge any batteries other than NiMH batteries in the camera, dock, or quick recharger.
● Insert NiMH batteries in the correct orientation.
● Use the camera, dock, or quick recharger in a dry location only.
● Do not charge NiMH batteries in a hot location, such as in direct sunlight or near a fire.
● When recharging NiMH batteries, do not cover the camera, dock, or quick recharger.
● Do not operate the camera, dock, or quick recharger if NiMH batteries appear damaged.
● Do not disassemble the camera, dock, or quick recharger.
● Unplug the HP AC power adapter or quick recharger from the electrical outlet before cleaning the power adapter or quick recharger.
41
B
Specifications
Resolution
Sensor
Color depth
Still pictures, M425:
● 5.25MP (2654 by 1955) total pixel count
● 5.0MP (2592 by 1936) effective pixel count
Still pictures, M525:
● 6.3MP (2934 by 2171) total pixel count
● 6.0MP (2864 by 2152) effective pixel count
Video clips (VGA):
320 by 240 total pixel count, 20 frames/sec
Diagonal 7.19 mm (1/2.5-inch, 4:3 format) CCD
36 bit (12 bits by 3 colors). 36 bit images are transformed into an optimized 24 bit image and stored in the JPEG format. This transformation results in no discernible change to color or detail in the stored image, and allows the image to be read by computers.
Lens
Focal length:
● Wide—6.25 mm
● Telephoto—17.25 mm
● M425 35 mm equivalent—~38.3 mm to 105.7 mm
● M525 35 mm equivalent—~37.5 mm to 103.6 mm
F-Number:
● Wide—f/2.8 to f/8
● Telephoto—f/4.7 to f/7.6
None
Viewfinder
Zoom
Focus
Shutter speed
Built-in flash
● 3x optical zoom with 8 positions between wide and telephoto
● Digital zoom, M425—1x to 6x
● Digital zoom, M525—1x to 7x
Focus settings: Auto (default), Macro
Auto:
● Wide—500 mm (20 in) to infinity
● Telephoto—600 mm (23.6 in) to infinity
Macro:
Wide—120 mm to 1 m (4.7 in to 39.4 in)
1/1000 to 2 seconds
Yes, 6-second typical recharge time (8-second maximum recharge time at power-on)
Flash working range ● Zoom Position Wide—Maximum with ISO Speed set to Auto ISO:
3.8 m (12.5 ft)
● Zoom Position Telephoto—Maximum with ISO Speed set to Auto
ISO: 2.1 m (6.9 ft)
● Uniformity—Corner intensity > 55% of Center intensity (Lux
Seconds)
(continued)
Image Display
Storage
4.31 cm (1.7 in) color LTPS TFT LCD with backlight, 115,200 pixels (480 by 240) total pixel count
● 32MB internal flash memory.
● Slot for memory card.
● This camera supports standard and high speed, HP-branded
Secure Digital (SD) memory cards, 8MB to 2GB.
● A large number of files (over 300) does affect the time it takes for the camera to turn on.
● The number of images or video clips that can be saved in memory
depends on the Image Quality settings (see
Compression format ● JPEG (EXIF) for still images
● EXIF2.2 for still images with embedded audio
● Motion JPEG for video clips
Interfaces
Dock connector—Molex 55768-2011, which connects to HP Photosmart docks with USB Mini AB connector, DC input connector, and AV connector.
Standards
External body dimensions
Weight
Power
● PTP—MSDC and SIDC
● USB
● JPEG
● Motion JPEG
● DPOF
● EXIF
● DCF
● DPS
Measurements with camera off and lens retracted (width, depth, height):
● 95 mm (W) by 31 mm (D) by 62 mm (H)
● 3.74 in (W) by 1.22 in (D) by 2.44 in (H)
166 grams (5.85 ounces) without battery
Temperature range
Typical power usage: 2.5 Watts (with Image Display on). 5 Watts peak power usage.
Power sources include:
● Two rechargeable NiMH batteries
● HP AC power adapter (5 Vdc, 2000 mA, 10.00 W)
Operational
0° to 50° C (32° to 122° F) at 15% to 85% relative humidity
Storage
–30° to 65° C (–22° to 149° F) at 15% to 90% relative humidity
Memory capacity
Not all 32MB of internal memory is available for storing images, because some memory is used for internal camera operations. The actual file sizes and number of still images that can be stored in internal memory or on a memory card will vary depending on the content of each still image and the length of any associated audio clip.
43
Appendix B
Image quality
The following tables list the approximate number and average size of still images that can be stored in internal memory when the camera is set to different Image Quality settings (see Image
Quality under Using the Capture Menu on page 17
).
HP Photosmart M425
5MP Best
Normal (5MP)
3MP
1MP
VGA
HP Photosmart M525
3 images (3MB each)
8 images (1.25MB each)
13 images (750KB each)
40 images (250KB each)
130 images (76.8KB each)
6MP Best
Normal (6MP)
4MP
2MP
VGA
2 images (3.6MB each)
6 images (1.5MB each)
10 images (1MB each)
20 images (500KB each)
130 images (76.8KB each)
Note
The values shown are for images without audio clips. Sixty seconds of audio adds
330KB to the file size.
Index
A
B
batteries
blinking lights on camera 5, 6
C
camera
D
E
F
flash
focus
G
H
I
images
install memory card 8 install software 8
interfaces 43 internal memory 11, 43
L
M
memory
menus
N
number of
O
online
P
45
power
R
record
S
safety precautions for
selecting images for
Self-Timer
T
U
V
W
Z
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project