Windows 7 Installation. Newport Delay Line Stages Controller

DL Controller Series USB Driver Installation Manual

2.0

Windows 7 Installation

Create a new folder on your computer then copy the driver files below from the

“DLController Series” CD to this folder:

• usb_dev_serial.inf

• usb_dev_serial_amd64.cat

• usb_dev_serial_x86.cat

Connect the DL controller on an USB port on open the device manager from the control panel.

EDH0394En1022 – 11/18

2

DL Controller Series USB Driver Installation Manual

The DL controller is detected as « USB Serial Device » but has no COM port.

Right click on the “USB Serial Device” and select “Update Driver Software”.

Select “Browse my computer for driver software”, select the folder where the custom

.inf and the associated .cat files are located, and click “Next”.

3

EDH0394En1022 – 11/18

DL Controller Series USB Driver Installation Manual

Brows the driver folder on your computer.

Click on the « Install » Button.

EDH0394En1022 – 11/18

The driver is now installed. Click on “Close” button.

4

DL Controller Series USB Driver Installation Manual

The DL Controller have now a COM port and is ready to use.

5

EDH0394En1022 – 11/18