Laser Notices. Brother MSA 2040, HL 2030, 2070N, HL 2040, HL-2040R, HL-2030, 2070N - B/W Laser Printer, 2040, HL-2040, HL 2040 - B/W Laser Printer

Appendix (For USA and Canada)

Laser Notices

Laser Safety (100 to 120 volt model only)

This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services

(DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of

1968. This means that the printer does not produce hazardous laser radiation.

C

Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation.

FDA Regulations (100 to 120 volt model only)

U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the United States. One of the following labels on the back of the printer indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States.

MANUFACTURED:

Brother Industries, Ltd.,

15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan

This product complies with FDA performance standards for laser products except for deviations pursuant to Laser

Notice No.50, dated July 26, 2001.

MANUFACTURED:

Brother Corporation (Asia) Ltd. Brother Buji Nan Ling Factory

Gold Garden Ind., Nan Ling Village, Buji, Rong Gang, Shenzhen, CHINA

This product complies with FDA performance standards for laser products except for deviations pursuant to Laser

Notice No.50, dated July 26, 2001.

Caution:

Use of controls, adjustments or performance of procedures other than those specified in this User’s Guide may result in hazardous radiation exposure.

Internal laser radiation

Maximum radiation power:5 mW

Wave length:770 - 810 nm

Laser class:Class 3B

C - 4