advertisement
10 Camera and IP Setup
Contents
Camera and IP Setup by ESP .................................................................................................... 10-2
Camera and IP Setup Serial Commands.................................................................................... 10-3
Video........................................................................................................................................... 10-4
Evaluation ................................................................................................................................... 10-5
Calibration................................................................................................................................... 10-8
Window of Interest ...................................................................................................................... 10-9
Configuration Database ............................................................................................................ 10-13
Dynamic Setup ......................................................................................................................... 10-14
X-Mode™.................................................................................................................................. 10-15
Pixel Sub-Sampling .................................................................................................................. 10-16
Camera Settings ....................................................................................................................... 10-18
Focal Distance .......................................................................................................................... 10-19
Focal Distance Table (Read-Only) ........................................................................................... 10-20
Increment Focus Position ......................................................................................................... 10-21
Decrement Focus Position........................................................................................................ 10-21
Illumination Brightness.............................................................................................................. 10-22
Skew Correction ....................................................................................................................... 10-23
Morphological Pre-Processing.................................................................................................. 10-26
Morphological Operation and Operator Size ............................................................................ 10-27
This section provides adjustment parameters for the physical controls of the camera, image acquisition, database settings, and image diagnostics.
MINI Hawk Xi High Performance Imager User Manual 10-1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 43 Step 1 Check Hardware
- 43 Step 2 Connect the System
- 43 Step 3 Position Imager and Symbol
- 43 Step 4 Install ESP
- 43 Step 5 Select Model
- 43 Step 6 Connect
- 43 Step 7 Locate the Symbol in the Field of View
- 43 Step 8 Calibrate
- 43 Step 9 Test Read Rate
- 43 Step 10 Configure the Imager in ESP
- 43 Step 11 Save Configuration in ESP
- 44 EZ Mode
- 44 Application Mode
- 44 Menu Toolbar
- 44 Navigating in ESP
- 44 Send/Receive Options
- 44 Using EZ Trax
- 45 Communications by ESP
- 45 Communications Serial Commands
- 45 Host Port Connections
- 45 Host Port Protocol
- 45 ACK/NAK Options
- 45 Polling Mode Options
- 45 Ethernet
- 45 Response Timeout
- 45 LRC Status
- 45 Protocol Configuration Examples
- 45 ASCII Character Entry Modifier
- 45 Preamble
- 45 Postamble
- 46 Calibration Serial Commands
- 46 Calibration Overview
- 46 Calibration Options
- 46 Calibration by ESP
- 46 Initiating Calibration
- 111 Additional Notes about Calibration
- 112 Read Cycle by ESP
- 112 Read Cycle Serial Commands
- 112 Read Cycle Setup
- 112 Multisymbol
- 112 Trigger Mode and Filter Duration
- 112 External Trigger Polarity
- 112 Serial Trigger
- 112 Start Trigger Character (Non-Delimited)
- 112 Stop Trigger Character (Non-Delimited)
- 112 End of Read Cycle
- 112 Capture Mode
- 112 Capture Timing
- 112 Image Processing Timeout
- 112 Image Storage
- 112 Decodes Before Output
- 112 Setting Up the Imager for EZ Trax
- 113 Symbologies by ESP
- 113 Symbologies Serial Commands
- 113 Data Matrix
- 113 Aztec Code
- 113 QR Code
- 113 Micro QR Code
- 113 Code 128/EAN
- 113 Interleaved 2 of
- 113 Codabar
- 113 UPC/EAN
- 113 Pharmacode
- 113 Postal Symbologies
- 113 GS1 DataBar
- 113 MicroPDF
- 113 Composite
- 113 Narrow Margins/Symbology Identifier
- 113 Background Color
- 114 I/O Parameters by ESP
- 114 I/O Parameters Serial Commands
- 155 Symbol Data Output
- 155 No Read Message
- 155 Read Duration Output
- 155 Output Indicators
- 155 Beeper
- 155 LED Configuration
- 155 Serial Verification
- 155 EZ Button
- 155 EZ Button Modes
- 155 Configurable Output
- 155 Trend Analysis Output
- 155 ISO/IEC 16022 Symbol Quality Output
- 155 Diagnostic Output
- 155 Configurable Output
- 155 Trend Analysis Output
- 155 ISO/IEC 16022 Symbol Quality Output
- 155 Diagnostic Output
- 155 Configurable Output
- 155 Trend Analysis Output
- 155 ISO/IEC 16022 Symbol Quality Output
- 155 Diagnostic Output
- 155 Power-On/Reset Counts
- 155 Time Since Reset
- 155 Service Message
- 155 Frame Information
- 155 Image Output
- 155 Database Identifier Output
- 155 Quality Output
- 155 Configuring EZ Trax Output
- 156 Symbol Quality by ESP
- 156 Symbol Quality Serial Commands
- 156 Overview of Symbol Quality
- 156 Symbol Quality Separator/Data Matrix Output Mode
- 156 ISO/IEC 16022 Symbol Quality Output
- 156 ISO/IEC 16022 Symbol Quality Output by ESP
- 156 Microscan Symbol Quality Output
- 156 Microscan Symbol Quality Output by ESP
- 157 Matchcode by ESP
- 157 Matchcode Serial Commands
- 157 Overview of Matchcode
- 157 Matchcode Type
- 157 Match Replace
- 230 Mismatch Replace
- 230 New Master Pin
- 231 Camera and IP Setup by ESP
- 231 Camera and IP Setup Serial Commands
- 231 Video
- 231 Evaluation
- 231 Calibration
- 231 Window of Interest
- 231 Configuration Database
- 231 Dynamic Setup
- 231 X-Mode
- 231 Pixel Sub-Sampling
- 231 Camera Settings
- 231 Focal Distance
- 231 Focal Distance Table (Read-Only)
- 231 Increment Focus Position
- 231 Decrement Focus Position
- 231 Illumination Brightness
- 231 Skew Correction
- 231 Morphological Pre-Processing
- 231 Morphological Operation and Operator Size
- 232 Configuration Database Serial Commands
- 232 Number of Active Indexes
- 232 Configuration Database Status
- 232 Database Mode
- 232 Save Current Settings to Configuration Database
- 232 Load Current Settings from Configuration Database
- 232 Request Selected Index Settings
- 232 Request All Configuration Database Settings
- 233 Terminal Window
- 233 Macros
- 233 Terminal Window Menus
- 234 Serial Utility Commands
- 234 Read Rate
- 234 Counters
- 234 Device Control
- 234 Differences from Default
- 234 Master Database
- 310 Firmware
- 310 Default/Reset/Save
- 310 Imager Status Requests
- 310 Learn Operations
- 310 Other Operational Serial Commands
- 311 Output Format Serial Commands
- 311 Output Format Status
- 311 Format Assign
- 311 Format Extract
- 311 Format Insert
- 311 Output Filter Configuration
- 311 Number of Filters