Pattern edit. Yamaha SY-77, G10

PATTERN MODE

Summary: This is where you edit individual events that have been recorded in a pattern.

Procedure:

From: pattern play or pattern record mode

Press: EDIT.

To exit: edit mode and return to pattern play mode press EXIT.

The pattern edit display will differ according to whether graph or data editing has been selected.

Pattern graph editing: To select graphic editing press F7 (Grap). The display will show a horizontal bar to indicate the position in the measure, and a keyboard diagram to indicate the notes that have been recorded at each step.

Pattern edit

Pattern data editing: To select data editing press

F8 (Data). The display will show the type and numerical values for each event. Data editing is divided into two modes; graph mode and data mode. In data mode you can either Change or

Insert data. When you enter data mode, change will automatically selected.

Pattern data editing is exactly the same as song data editing, except that the pattern number is displayed instead of the song name, and that the maximum measure number is 32 instead of 999.

For details, please refer to Song edit (data

insert) on page 181 or Song edit (data change) on page 180.

Pattern graph editing is exactly the same as song graph editing, except that the pattern number is displayed instead of the song name, and that the maximum measure number is 32 instead of 999. For details, please refer to Song edit

(graph) on page 179.

209