Selecting the image density. Electrolux 3000 DV Plus, 61371 M and

Selecting the image density

Using Auto Exposure

1. Press the Exposure Mode key to select the Auto Exposure mode.

2. If the Auto Exposure setting is not satisfactory, press the appropriate

Exposure Adjustment key, either Lighter or Darker, to set the desired image density.

Using Manual Exposure

1. Press the Exposure Mode key and select the Manual Exposure mode.

2. Press the appropriate Exposure Adjustment key, either Lighter or

Darker, to set the desired image density.

A-61371 April 2010 3-9

Entering the number of prints to be made

This function is only available in PR mode.

Entering a number from 1-9

• Enter the desired number of prints using the Multi Print key “1”.

If the 1 key is pressed when 9 is displayed, the number on the display is incremented by one: 10, 11, 12, etc.

Entering a number from 10-99

1. Set the tens digit using the 10 key.

2. Set the units digit using the 1 key.

For example, to set “25” press the 10 key twice and press the 1 key four times.

Correcting a number

To reset an entry:

• Press the Clear/Stop key, which resets the number on the Multi-Print display to “1”.

3-10 A-61371 April 2010