Printer maintenance. Electrolux 3000 DV Plus, 61371 M and

Printer maintenance

Clean the printer at regular intervals.

NOTES:

• Use a soft cloth and NEVER use abrasives or corrosive detergents; a damp cloth and a mild home detergent can be used for heavier cleaning.

• Never spray cleaning solution directly on the printer’s surface; the spray could penetrate the air vents and damage the printer.

• Do not spill water or detergent into the printer.

• Never touch the copper or brass electrodes or electrical parts that are located inside the top cover and underneath the toner cartridge, as a printer malfunction can result.

• Do not touch around the image transfer roller (may result in reduced print quality) or around the fusing unit (may result in burns).

Cleaning the paper cassette pickup rollers

1. Before cleaning the printer, turn off the power, unplug the power cord and disconnect all interface cables.

2. Clean the exterior panels with a soft, dry cloth.

3. Open the top cover.

4. Remove the toner cartridge and store it in a light-tight protected bag.

5. Open the paper feed roller cover.

6. Wipe the paper feed rollers with a soft, dry cloth.

7. Close the paper feed roller cover.

8. Reinstall the toner cartridge and close the top cover.

9. Turn the printer on.

1. Pull the paper cassette out of the printer and remove it.

2. Wipe the pickup roller with a soft, dry cloth.

3. Reinsert the paper cassette into the printer.

4-14 A-61371 April 2010