Windows Client AP Login. ATEN KL1516Ai

KL1508Ai / KL1516Ai User Manual

Windows Client AP Login

The Windows AP Client allows direct remote access to Windows systems users, without having to go through a browser (although you initially download

the Windows AP Client program from the browser page – see Chapter 15,

Download). To connect to the KL1508Ai / KL1516Ai, go to the location on

your hard disk that you downloaded the Windows AP Client program to, and double-click its icon (WinClient.exe). If this is the first time that you are running the utility, a dialog box appears requesting that you input your serial number:

The serial number can be found on a sticker on the inside cover of the User

Manual. Key in the serial number – 5 characters per box – then click OK to bring up the Windows Client Connection screen, shown below.

Note: 1. Letters in the serial number must be entered in upper case.

2. This dialog box only appears the first time you run the program. In the future, you go directly to the Windows Client Connection screen.

To connect to the KL1508Ai / KL1516Ai, click the WinClient.exe program icon (on your desktop) to bring up the Windows Client Connection screen:

64