advertisement
2-48
Waste ink bottle replacement
This section explains [Waste ink bottle replacement procedure].
There are two situation that require Waste ink bottle replacement procedure:
- When no Waste ink bottle is installed
- When the Waste ink bottle is full
The procedure for each case is described below.
Note
- Do not replace the Waste ink bottle during printing.
- When replacing, use caution not to drip the ink. To prevent ink drips from occurring, cover with paper.
Waste ink bottle replacement procedure
1 Remove the bottle from the waste ink pouropening (tube) by slightly tilting the fully filled
Waste ink bottle.
Waste ink pour-opening
2 Cap the bottle and remove it.
3 Wipe out any ink stains around the Waste ink bottle.
4
Install a new Waste ink bottle.
5
The message is displayed to select the waste ink counter reset (clear).
#BOT TLE EMPT Y?
* NO
#BOT TLE EMPT Y?
* YES
Note
- The printer automatically calculates waste ink with a counter and displays the message prompting replacement the Waste ink bottle when the Waste ink bottle is full.
There is no visual sensing of the waste ink level. Therefore, if the waste ink counter is reset (set to *YES) and the bottle is not empty, the waste ink may overflow.
6
Select “BOTTLE EMPTY? * YES” and press key.
2
2-49
2-50
Treatment when no Waste ink bottle is installed
1 The guidance message is displayed.
BOT TLE OUT
INSTALL BOT TLE
2
Install a Waste ink bottle. Refer to P.2-48 [Waste ink bottle replacement] steps 1 to 4.
3
The message is displayed to select the waste ink counter reset (clear).
#BOT TLE EMPT Y?
* NO
#BOT TLE EMPT Y?
* YES
4
Select “BOTTLE EMPTY? * YES” and press key.
Note
- If the Waste ink bottle is removed to visually check the level in the Waste ink bottle, select *NO.
3
Menu of Operation panel
This section explains the basic operation of the operation panel menu, structure and operation in each menu.
(Content in this section)
Basic menu operation in the offline mode..............3-2
Explanation of each menu operation .......................3-17
advertisement
Key Features
- Dye-sublimation transfer printing ink for vibrant and long-lasting colors
- Supports media up to 64 inches wide for large-format printing
- Built-in USB interface for easy connectivity
- Automatic media take-up reel unit for effortless media handling
- Optional exhaust attachment and blower unit for improved ventilation
- Daily maintenance kit and cleaning liquid cartridges for easy maintenance
- User-friendly software for intuitive operation
Related manuals
Frequently Answers and Questions
What is the maximum media width that the IP-5610 can handle?
What type of ink does the IP-5610 use?
Does the IP-5610 have a built-in media take-up reel?
What is the purpose of the optional exhaust attachment and blower unit?
How do I maintain the IP-5610?
advertisement