About the NETGEAR Wireless N150 Access Point WN. Netgear 150, WN604, WN604 - Wireless-N 150 Access Point, PY309300122

NETGEAR Wireless N150 Access Point WN604 Reference Manual

System Requirements

Before installing the WN604, make sure your system meets these requirements:

• A 10/100 Mbps Local Area Network device such as a hub or switch.

• The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the package, or one like it.

• A 100-240 V, 50-60 Hz AC power source.

• A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, or Mozilla

3.0 or above.

• At least one computer with the TCP/IP protocol installed.

• 802.11b/g/n-compliant devices, such as the NETGEAR WNDA3100v2 Wireless Adapter.

What’s In the Box?

The product package should contain the following items:

• NETGEAR Wireless N150 Access Point WN604.

• Power adapter and cord (12V dc, 1A).

• Straight through Category 5 Ethernet cable.

• Resource CD which includes this manual.

• Support Registration card.

Contact your reseller or customer support in your area if there are any missing or damaged parts.

You can refer to the Support Information Card for the telephone number of customer support in your area. You should keep the Support Information card, along with the original packing materials, and use the packing materials to repack the WN604 if you need to return it for repair. To qualify for product updates and product warranty registrations, we encourage you to register on the

NETGEAR Web site at: http://www.NETGEAR.com

.

Hardware Description

This section describes the front and rear hardware functions of the WN604.

Introduction 1-5 v1.0, March 2010