Configuring Time Settings. Netgear 150, WN604, WN604 - Wireless-N 150 Access Point, PY309300122

NETGEAR Wireless N150 Access Point WN604 Reference Manual

6. If the wireless client is added successfully and the WN604’s wireless settings have been changed, a Success dialog appears with a message. The the user can click to view the new settings.:

Figure 3-6 WPS success - settings changed

7. If the settings have not been changed, the user can click on the Success dialog to return to the

Add WPS Client screen.

8. In case of an error in completing the WPS process, refer to the help provided.

Configuring Security Manually

In case you are configuring security on your WN604 Wireless Access Point manually, the remaining sections of this chapter will guide you through the process.

SSID and WEP/WPA Settings Setup Form

For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step.

• SSID: The Service Set Identification (SSID) identifies the wireless local area network.

NETGEAR_11ng is the default WN604 SSID. However, you may customize it by using up to

32 alphanumeric characters. Write your customized SSID on the line below.

___________________________________

Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID:

• Authentication:

3-8 v1.0, March 2010