Cleaning the control panel. Miele G 1040

Cleaning and care

Cleaning the control panel

,

Do not use abrasive cleaning agents, glass cleaning agents or all-purpose cleaners. Because of their chemical composition they could cause serious damage to surfaces.

Plastic panels:

^ This type of control panel should only be wiped with a damp cloth or suitable cleaning agent designed for use on plastic.

Stainless steel panels:

^ Control panels made of stainless steel should be cleaned using a damp cloth and a little washing up liquid, or a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel (do not use it on the controls).

^ To help prevent re-soiling, a proprietary conditioning agent for stainless steel, such as Neoblank

(available from the Miele UK Spare

Parts Department) can also be used.

Follow the manufacturer's instructions on the label and apply sparingly with an even pressure following the direction of the grain.

Aluminium panels:

^ Clean aluminium panels with a damp cloth and a little washing up liquid.

Aluminium is affected by the way that light falls on it, by the surrounding environment and by the angle you observe it from.

,

Stainless steel and aluminium surfaces and controls are susceptible to scratching and abrasion, and must be treated with due care. They may suffer discolouration or damage if soiling is left on them for too long.

Remove soiling immediately.

36