advertisement
▼
Scroll to page 2
of 52
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download
PDF
advertisement
Table of contents
- 3 IMPORTANT INFORMATION
- 6 SERIAL NUMBER LOCATIONS
- 6 Chassis number
- 6 Engine number, engine type
- 6 OPERATION INSTRUMENTS
- 6 Clutch lever
- 6 Hot start lever
- 7 Hand brake lever
- 7 Short circuit button
- 7 Starter button (450 SX-F)
- 7 Filler cap
- 7 Fuel tap
- 8 Choke
- 8 Shift lever
- 8 Kickstarter (250 SX-F)
- 8 Foot brake pedal
- 8 Plug in stand
- 9 Compression damping of fork
- 9 Rebound damping of fork
- 9 Compression damping of shock absorber
- 10 Rebound damping of shock absorber
- 11 MOTORCYCLE
- 11 Instructions for initial operation
- 11 Running in the Racing models
- 12 DRIVING INSTRUCTIONS
- 12 Check the following before each start
- 13 Starting when the engine is cold
- 13 Starting when the engine is warm
- 13 What to do when the engine is "flooded
- 14 Starting off
- 14 Shifting/Riding
- 14 Braking
- 14 Stopping and parking
- 15 PERIODIC MAINTENANCE
- 17 MAINTENANCE WORK ON CHASSIS AND ENGINE
- 17 Pivot bearing
- 18 Basic suspension setup for the weight of the driver
- 18 Checking the shock absorber and spring
- 18 Determining the static sag of the shock absorber
- 18 Determining the riding sag of the shock absorber
- 19 Checking the basic setup of the telescopic fork
- 19 Changing the spring preload on the telescopic fork
- 19 Replacing fork springs
- 19 Breather plug front fork
- 19 Cleaning the dust sleeves of the telescopic fork
- 20 Changing the fork offset (caster)
- 21 Checking and adjusting the steering head bearing
- 21 Checking the throttle cable installation
- 22 How to change the handlebar position
- 22 Check chain tension
- 23 Correct chain tension
- 23 sprocket teeth
- 24 Chain maintenance
- 24 Chain wear
- 25 General information about KTM disc brakes
- 26 Adjusting the free travel at the hand brake lever
- 26 Checking the brake fluid level - front brake
- 26 Refilling the front brake fluid reservoir
- 26 Checking the front brake pads
- 27 Replacing the front brake pads
- 27 Checking the rear brake fluid level
- 27 Refilling the rear brake fluid reservoir
- 28 Changing the basic position of the foot brake pedal
- 28 Checking the rear brake pads
- 28 Replacing the rear brake pads
- 29 Dismounting and mounting the front wheel
- 30 Dismounting and mounting the rear wheel
- 30 Checking spoke tension
- 31 Tires, air pressure
- 31 Battery (450 SX-F)
- 32 Charging the battery (450 SX-F)
- 32 Fuse (450 SX-F)
- 33 Cooling system
- 33 Checking the coolant level
- 33 Bleeding the cooling system
- 35 Cleaning the air filter
- 35 Adjusting the throttle cables
- 36 Changing the original position of the clutch lever
- 36 Checking the oil level of the hydraulic clutch
- 36 Bleeding of the hydraulic clutch
- 37 Carburetor - Adjust idling
- 37 Basic information on carburetor wear
- 37 Checking the float level (float height)
- 38 Draining the float chamber of the carburetor
- 38 Checking the engine oil level
- 39 Engine oil
- 39 Changing the engine oil
- 40 Changing the oil filter
- 41 TROUBLESHOOTING
- 43 CLEANING
- 43 STORAGE
- 44 TECHNICAL DATA - ENGINE
- 45 TECHNICAL DATA - CHASSIS
- 48 HEAD WORK INDEX