CD CHANGER OPERATIONS. JVC KD-LX10

CD CHANGER OPERATIONS

We recommend that you use one of the CH-X series (ex: CH-X1200) with your unit.

If you have another CD automatic changer, consult your JVC car audio dealer for connections.

• For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K) for connecting it to this unit.

Before operating your CD automatic changer:

• Refer also to the Instructions supplied with your CD changer.

• If no discs are in the magazine of the CD changer or the discs are inserted upside down, “NO DISC” will appear on the display. If this happens, remove the magazine and set the discs correctly.

• If “RESET 1 - RESET 8” appears on the display, something is wrong with the connection between this unit and the CD changer. If this happens, check the connection, connect the connecting cord(s) firmly if necessary, then press the reset button of the CD changer.

Playing CDs

¢

4

Number buttons

1(7) to 3 (9)

SOURCE

(ATT)

Number buttons

4 (10) to 6 (12)

Select the CD automatic changer.

Each time you press the button, the source changes as described on page 5.

Playback starts from the first track of the first disc.

All tracks of all discs are played back.

Track number Elapsed playing time

32

Disc number appears.

Note:

When a CD is in the CD changer, selecting CD changer as the source by pressing SOURCE (ATT) starts CD play.

EN32-35.LX10[J]/f 32 99.12.25, 4:11 PM

To fast-forward or reverse the track

Press and hold

¢

, while playing a CD, to fast-forward the track.

Press and hold 4 , while playing a CD, to reverse the track.

To go to the next tracks or the previous tracks

Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back.

Press 4 briefly, while playing a CD, to go back to the beginning of the current track. Each time you press the button consecutively, the beginning of the previous tracks is located and played back.

To go to a particular disc directly

Press the number button corresponding to the disc number to start its playback (while the CD changer is playing).

• To select a disc number from 1 – 6:

Press 1 (7) – 6 (12) briefly.

• To select a disc number from 7 – 12:

Press and hold 1 (7) – 6 (12) for more than 1 second.

Ex. When disc number 3 is selected

Track number

Disc number

To show the CD Text information

This is possible only when connecting a JVC CD automatic changer equipped with CD Text reading capability.

See “Playing a CD Text” on page 12.

33

EN32-35.LX10[J]/f 33 99.12.25, 4:11 PM