GXV3601 FTP Page. Grandstream Networks GXV3601_HD, GXV-3601-P, GXV3601

GXV3601 IP Camera

SSL – Checked if the SMTP server requires a secure connection.

Test Email Account Settings – Click the Test button to send a test email from the From

E-Mail to the To E-Mail to make sure that SMTP is configured properly. If the receiver can get the test email, then the SMTP settings are ready to go.

GXV3601 FTP Page

The FTP server is used to store video files if you configure the GXV3601 to record video and upload it to the FTP server when an alarm event or motion detection is triggered.

FTP Settings

Enable FTP – The default setting is “No,” if you want the GXV3601 to upload the recorded video to the FTP server when an alarm is triggered, set this field to “Yes.”

FTP Server – The IP address or hostname of the SMTP server, ie. ftp.myserver.com.

FTP Server Port – The port that your FTP server is using.

User Name / Password – The user name and password required to log into your

FTP server

Path – The directory in the FTP server where recorded video will be uploaded.

Test FTP Account Settings – Click the

Test button to upload a sample file to make sure that FTP is properly configured.

GXV3601 PTZ Page

This page configures the PTZ settings. Select the PTZ protocol that your connected equipment supports by clicking on the radio in front of the protocol. Next, select the

Baudrate from the drop down menu.

PTZ Configuration Items

PTZ Protocol – The GXV3601 supports both Pelco-D and Pelco-P.

Select the protocol your PTZ equipment supports.

PTZ Baudrate – The Baud rate is the number of distinct symbol changes (signaling events) made to the transmission medium

Firmware 1.0.4.6 Page 26 of 36

Grandstream Networks, Inc. 09/2010