- Computers & electronics
- Computer components
- System components
- Internal hard drives
- Seagate
- Constellation ES
- Product Manual
Humidity. Seagate ST32000645NS, ST33000651NS, Constellation ES, ES.2 2TB, ST32000647NS, ST32000646NS, ST33000652NS, ST33000650NS
Add to My manuals50 Pages
advertisement
b. Non-operating
–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive.
HDA Temp.
Check Point
Figure 3. Location of the HDA temperature check point
Note.
Image is for reference only, may not represent actual drive
2.9.2
Humidity
2.9.2.1
Relative humidity
Operating:
Nonoperating:
5% to 90% noncondensing (30% per hour max)
5% to 95% noncondensing (30% per hour max)
2.9.3
Altitude
Operating:
Nonoperating:
–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)
–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)
2.9.4
Shock
All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.
2.9.4.1
Operating shock
These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 70 Gs
(read) and 40 Gs (write) based on half-sine shock pulses of 2ms. Shocks should not be repeated more than two times per second.
2.9.4.2
Nonoperating shock
The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2ms duration.
2.9.5
Vibration
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws.
Vibration may be applied in the X, Y or Z axis.
16 C ONSTELLATION ES.2 S ERIAL ATA P RODUCT M ANUAL , R EV . H
advertisement
Related manuals
advertisement
Table of contents
- 9 Introduction
- 10 About the Serial ATA interface
- 11 Drive specifications
- 11 Specification summary tables
- 12 Formatted capacity
- 12 LBA mode
- 13 Default logical geometry
- 13 Recording and interface technology
- 13 Physical characteristics
- 13 Seek time
- 14 Start/stop times
- 14 Power specifications
- 14 Power consumption
- 19 Conducted noise
- 19 Voltage tolerance
- 19 Power-management modes
- 21 Environmental limits
- 21 Temperature
- 22 Humidity
- 22 Altitude
- 22 Shock
- 22 Vibration
- 23 Acoustics
- 23 Test for Prominent Discrete Tones (PDTs)
- 24 Electromagnetic immunity
- 24 Reliability
- 24 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)
- 24 Agency certification
- 24 Safety certification
- 25 Electromagnetic compatibility
- 25 FCC verification
- 26 Environmental protection
- 26 European Union Restriction of Hazardous Substances (RoHS) Directive
- 26 China Restriction of Hazardous Substances (RoHS) Directive
- 26 Corrosive environment
- 26 Reference documents
- 27 Product warranty
- 28 Configuring and mounting the drive
- 28 Handling and static-discharge precautions
- 28 Configuring the drive
- 28 Serial ATA cables and connectors
- 29 Drive mounting
- 30 Mechanical specifications
- 31 About FIPS
- 32 About self-encrypting drives
- 32 Data encryption
- 32 Controlled access
- 32 Admin SP
- 32 Locking SP
- 32 Default password
- 32 Random number generator (RNG)
- 32 Drive locking
- 33 Data bands
- 33 Cryptographic erase
- 33 Authenticated firmware download
- 33 Power requirements
- 33 Supported commands
- 33 RevertSP
- 34 ATA Security Erase Unit Command on SED SATA drives
- 34 Sanitize Device - CRYPTO SCRAMBLE EXT
- 35 Serial ATA (SATA) interface
- 35 Hot-Plug compatibility
- 36 Serial ATA device plug connector pin definitions
- 37 Supported ATA commands
- 39 Identify Device command
- 43 Set Features command
- 44 S.M.A.R.T. commands