- Computers & electronics
- Computer components
- System components
- Internal hard drives
- Seagate
- Constellation ES
- Product Manual
Mechanical specifications. Seagate ST32000645NS, ST33000651NS, Constellation ES, ES.2 2TB, ST32000647NS, ST32000646NS, ST33000652NS, ST33000650NS
Add to my manuals
50 Pages
advertisement
▼
Scroll to page 2
of 50
3.4.1
Mechanical specifications
Refer to Figure 5 for detailed mounting configuration dimensions. See Section 3.4, “Drive mounting.”
3TB models
2TB models
Weight: (max)
Weight: (max)
1.499 lb
1.444 lb
680 g
655 g
Note.
These dimensions conform to the Small Form Factor Standard documented in SFF-8301 and
SFF-8323, found at www.sffcommittee.org
.
in mm in mm in mm
Figure 5. Mounting dimensions—top, side and end view
24 C ONSTELLATION ES.2 S ERIAL ATA P RODUCT M ANUAL , R EV . H
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 9 Introduction
- 10 About the Serial ATA interface
- 11 Drive specifications
- 11 Specification summary tables
- 12 Formatted capacity
- 12 LBA mode
- 13 Default logical geometry
- 13 Recording and interface technology
- 13 Physical characteristics
- 13 Seek time
- 14 Start/stop times
- 14 Power specifications
- 14 Power consumption
- 19 Conducted noise
- 19 Voltage tolerance
- 19 Power-management modes
- 21 Environmental limits
- 21 Temperature
- 22 Humidity
- 22 Altitude
- 22 Shock
- 22 Vibration
- 23 Acoustics
- 23 Test for Prominent Discrete Tones (PDTs)
- 24 Electromagnetic immunity
- 24 Reliability
- 24 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)
- 24 Agency certification
- 24 Safety certification
- 25 Electromagnetic compatibility
- 25 FCC verification
- 26 Environmental protection
- 26 European Union Restriction of Hazardous Substances (RoHS) Directive
- 26 China Restriction of Hazardous Substances (RoHS) Directive
- 26 Corrosive environment
- 26 Reference documents
- 27 Product warranty
- 28 Configuring and mounting the drive
- 28 Handling and static-discharge precautions
- 28 Configuring the drive
- 28 Serial ATA cables and connectors
- 29 Drive mounting
- 30 Mechanical specifications
- 31 About FIPS
- 32 About self-encrypting drives
- 32 Data encryption
- 32 Controlled access
- 32 Admin SP
- 32 Locking SP
- 32 Default password
- 32 Random number generator (RNG)
- 32 Drive locking
- 33 Data bands
- 33 Cryptographic erase
- 33 Authenticated firmware download
- 33 Power requirements
- 33 Supported commands
- 33 RevertSP
- 34 ATA Security Erase Unit Command on SED SATA drives
- 34 Sanitize Device - CRYPTO SCRAMBLE EXT
- 35 Serial ATA (SATA) interface
- 35 Hot-Plug compatibility
- 36 Serial ATA device plug connector pin definitions
- 37 Supported ATA commands
- 39 Identify Device command
- 43 Set Features command
- 44 S.M.A.R.T. commands