Edit a Route Name. Lowrance electronic LMS-525C DF, LMS-520C

Edit a Route Name

1. From the N

AVIGATION

P

AGE

, press MENU | ENT or from the M

AP

P

AGE

press

MENU | MENU | ↓ to R OUTE P LANNING

| ENT .

2. Press ↓ to route name| ENT | ENT .

3. Press ↑ or ↓ to change the first character, then press → to move the cursor to the next character and repeat until the name is correct, then press ENT . Return to the previous page by pressing EXIT repeatedly.

Edit Route Waypoints

You can edit the route by adding and removing waypoints.

1. From the N AVIGATION P AGE

, press MENU | ENT or from the M AP P AGE

press

MENU | MENU | ↓ to R

OUTE

P

LANNING

| ENT .

2. Press ↓ to route name| ENT | ↓ to R

OUTE

W

AYPOINTS

L

IST

. Use ↓ ↑ to select a waypoint and press ENT .

Edit Route Waypoints menu.

3. Use ↓ ↑ to select a command from the Edit Route Waypoints menu and press ENT . Add From Map lets you insert a waypoint in the route by clicking on a map location with the cursor. Add Waypoint calls up the Waypoint List so you can insert a waypoint from the list. Remove

Waypoint will delete the waypoint from the route. View Waypoint will show you where the selected waypoint is on the map.

NOTE:

When adding waypoints to a route, the inserted waypoints will appear in the route in front of the waypoint you have selected. To insert waypoints at the end of the route, make sure to select "(End of route)" before adding them.

145