Installation Summary. Melody Hi Fi 1130AG - Aironet - Wireless Access Point, 1130AG

Installation Summary

Installing the access point involves these operations:

• Mounting the access point

• Connecting power

• Obtaining an IP address

• Configuring power

• Configuring basic settings

• Configuring security settings

Before you install the access point, make sure that you are using a computer connected to the same network as the access point, and obtain the following information from your network system administrator:

• A system name

• The case-sensitive wireless service set identifier (SSID) for your radio network

• A Simple Network Management Protocol (SNMP) community name and the SNMP file attribute (if SNMP is in use)

Quick Start Guide Cisco Aironet 1130AG Access Point 13