Connecting to a Display (Recommended Methods). OPPO Digital BDP-93

I N S T A L L A T I O N

Connecting to a Display (Recommended Methods)

HDMI Connection to a single TV

Rear Panel

Video In

HDMI In

Composite Video Cable

(optional)

HDMI Cable (to HDMI 1 or 2)

Method 1 – HDMI Connection Directly to a single TV

• If your TV has an HDMI (High-Definition Multimedia Interface) input, you can use the included

HDMI cable to connect the player to the TV. This connection method delivers both video and audio in a pure digital format via a single cable. The HDMI video output of the player allows for the highest possible video quality and resolution.

• There are two HDMI output terminals (HDMI 1 and HDMI 2) on the rear panel of BDP-93, both of which can be connected to your TV. We recommend to use HDMI 1 since it benefits from the dedicated Marvell QDEO video processor, and set the “Primary Output” option in the setup menu to “HDMI 1” (please refer to page 52 for more details).

• You may connect the composite video cable to the TV for troubleshooting purposes, in the event that there is a problem with HDMI video. However it is not recommended to use the composite video as the primary method of video delivery to the TV, because it only produces a standard definition video signal and forfeits the advantage of high definition video.

10