advertisement
Computer Control
3.4
Error Messages
If an error occurs during a command execution, the player returns an error code.
The table below lists each code with a description of the error:
Code
E00
E04
E06
E11
E12
Message
Communication error
Feature not available
Missing argument
Disc does not exist
Search error
Description
Communication Line Error due to framing error or buffer overflow
Non-Usable Function has been tried – either the command mnemonic is wrong or the command can not be used in this mode
Correct parameter is not specified
There is no disc in the tray
Search address can not be found
E15
E16
Picture stop
Interrupt by other device
Read error of Text File; (When the command (UU) is executed)
Playback has been stopped by a picture stop code while in the Auto Play mode
The command(s) sent via the serial line were not executed before commands were sent from the front panel buttons and/or remote control unit
E99 Panic
Forced end of the data transfer while Text File sends to PC (When the command (UU) is executed)
Unrecoverable Error occurred – possible that a disc cannot be loaded and/or playing can not continue
3.5
Initial Setting
The following table provides the default internal register and switch settings. Take care to set each to the required parameters when creating an application program.
Register/Switch Setting at Power ON
Key Lock 2 : If set 2 at power OFF
0 : All other cases
Video Switch
Audio Switch
1
3
: ON
: Audio 1
Display Switch
Address mode
0 : OFF
1 : Time
Speed Parameter 30 : ½ Speed
CCR 3 : Mode 3
Register A
Register B
Register D
3 : Title/Chapter and Frame
Display (DVD)
Track/Time Display (CD, VCD)
0 : Normal Squelch
0 : CR
- 7 -
advertisement
Related manuals
advertisement