advertisement
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Appendix Section
Appendix A – Technical Specifications
General
Feature
Standards
Protocols
Data Transfer Rates:
Ethernet
Fast Ethernet
Gigabit Ethernet
Network Cables
Detailed Description
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3z 1000BASE-T (SFP “Mini GBIC”)
IEEE 802.1D/2004/Spanning Tree (802.1s, 802.1w)
IEEE 802.1Q-2005 VLAN
IEEE 802.1p Priority Queues
IEEE 802.1X Network Access Control
IEEE 802.3 Nway Auto-negotiation
IEEE 802.3ad Link Aggregation Control
IEEE 802.3x Full-duplex Flow Control
IEEE 802.1u Fast Ethernet
CSMA/CD
Half-duplex
10 Mbps
100Mbps
-------------
Full-duplex
20Mbps
200Mbps
2000Mbps
Cat.5 Enhanced for 1000BASE-T
UTP Cat.5, Cat. 5 Enhanced for 100BASE-TX
UTP Cat.3, 4, 5 for 10BASE-T
EIA/TIA-568 100-ohm screened twisted-pair (STP)(100m)
Number of Ports DGS-3120-24TC: 24-Port 10/100/1000Base-T, 4 Combo Copper/SFP ports and 2 dedicated stacking ports.
DGS-3120-24SC: 8-Port 10/100/1000Base-T/SFP combo ports, 16 SFP ports and 2 dedicated stacking ports.
DGS-3120-24SC-DC: 8-Port 10/100/1000Base-T/SFP combo ports, 16 SFP ports and 2 dedicated stacking ports.
DGS-3120-24PC: 24-Port PoE 10/100/1000Base-T, 4 Combo PoE Copper/SFP ports and 2 dedicated stacking ports.
DGS-3120-48TC: 48-Port 10/100/1000Base-T, 4 Combo Copper/SFP ports and 2 dedicated stacking ports.
DGS-3120-48PC: 48-Port PoE 10/100/1000Base-T, 4 Combo PoE Copper/SFP ports and 2 dedicated stacking ports.
Physical and Environmental
Feature
Internal Power Supply
Optional Redundant
Power Supply
Detailed Description
AC Input: 100 – 240 VAC, 50-60 Hz
Provide one connector in rear panel to install optional external RPS to enhance the reliability. When internal power is failed, the optional external RPS will take over all the power immediately and automatically.
32
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Power Consumption
Operating Temperature 0~50°C
Storage Temperature -40~70°C
Humidity
Dimensions
Operation: 10%-90% RH non-condensing
Storage: 5% ~ 90% RH non-condensing
DGS-3120-24TC: 440mm (W) x 210mm (D) x 44mm (H)
DGS-3120-24SC: 440mm (W) x 210mm (D) x 44mm (H)
DGS-3120-24SC-DC: 440mm (W) x 210mm (D) x 44mm (H)
DGS-3120-24PC: 440mm (W) x 310mm (D) x 44mm (H)
DGS-3120-48TC: 440mm (W) x 310mm (D) x 44mm (H)
DGS-3120-48PC: 440mm (W) x 380mm (D) x 44mm (H)
Weight
DPS-200: DGS-3120-24TC/24SC
DPS-500/DPS-500DC: DGS-3120-48TC
DPS-700: DGS-3120-24PC/48PC
DGS-3210-24TC: 40.5 Watts (Max.)
DGS-3210-24SC: 34.1 Watts (Max.)
DGS-3210-24SC-DC: 32.4 Watts (Max.)
DGS-3120-24PC: 477.7 Watts (Max.)
DGS-3210-48TC: 67.1 Watts (Max.)
DGS-3120-48PC: 506 Watts (Max.)
EMI
DGS-3210-24TC: 2.5kg.
DGS-3210-24SC: 2.6kg.
DGS-3210-24SC-DC: 2.6kg.
DGS-3120-24PC: 5.3kg.
DGS-3210-48TC: 4.6kg.
DGS-3120-48PC: 6.4kg.
CE Class A, FCC Class A, VCCI Class A, C-Tick Report
UL, CB Report Safety
Performance
Feature
Transmission Method
Packet Buffer
Maximum Forwarding
Rate
Switching Capability
Priority Queues
Detailed Description
Store-and-forward
2 MByte (Max)
DGS-3120-24TC: 65.48 million packets per second.
DGS-3120-24SC: 65.48 million packets per second.
DGS-3120-24SC-DC: 65.48 million packets per second.
DGS-3120-24PC: 65.48 million packets per second.
DGS-3120-48TC: 101.19 million packets per second.
DGS-3120-48PC: 101.19 million packets per second.
DGS-3120-24TC: 88Gbps
DGS-3120-24SC: 88Gbps
DGS-3120-24SC-DC: 88Gbps
DGS-3120-24PC: 88Gbps
DGS-3120-48TC: 136Gbps
DGS-3120-48PC: 136Gbps
8 Priority Queues per port
33
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
MAC Address Table
Wire Speed
Physical Stacking
Virtual Stacking /
Clustering
LED Indicators
Supports 16K MAC addresses
Full-wire speed (full-duplex) operation on all ports including Gigabit ports.
1. Two dedicated stacking ports in the rear panel of the Switch. Note: stacking cable length 3 meter for stacking DGS-3120 Series use only.
2. Provides bi-directional redundant stacking topology.
3. Topologies: Linear and Ring.
4. Bandwidth: Up to 10G.
5. The FCS version supports 6 units per stack. Supports backup master.
6. Support inter stacking trunking and mirroring.
7. Cannot stack EI and SI devices together.
1. Support D-Link Single IP Management v1.6
2. Manage up to 32 devices in a virtual stack with a single IP address.
Location
Per Device
LED Indicative
Power
Console
RPS
Fan Err
Master
7-Segment LED
Port LED Mode
Indicator
Color
Green
Green
Green
Status
Solid Light
Light off
Solid Light
Light off
Blinking
Description
Power On
Power Off
Console on
Console off
When switch detects that RPS is connected
Red
Solid Light
Light off
Blinking
Light off
RPS in using
RPS off
When any of the fans has failed
When all fans work normally
Green Solid Light When device is configured or selected to be a stacking master
When device is stacking slave
Green
Light off
Capable 1 – 6, H, h,
G
The box ID is assigned either by user
(static mode) or by the system
(automatic mode). When the box become a primary master, the 7 segment works as bi-function. That is box ID and “H” indicate as primary
Master and the display will be shown by turn. That is boxID -> H -> boxID -
> H
1-6: To indicate the stacking of the switch
H: When device was assigned as the stacking Master h: When device was selected to be the Backup Master
G: When Safeguard Engine entering the exhausted mode.
A LED Mode Select Button to switch two modes in turn for all
10/100/1000Mbps ports on DGS-3120-24PC/48PC:
- Link/Act/Speed Mode
34
LED Per
10/100/1000 Mbps
Port xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Green
- PoE Mode
Solid Light
Link/Act/Speed
Mode
PoE Mode
LED Per SFP Port Link/Act
LED Per Stacking
Port
SD
Link/Act
Green
Orange
Off
Green
Orange
Off
Green
Orange
Off
Green
Off
Green
Red
Solid Light
Solid Light
Blinking
Solid Light
Blinking
Light off
Solid Light
Solid Light
Light Off
Solid Light
Blinking
Solid Light
Blinking
Light off
Solid Light
Blinking
Light off
Solid Light
Blinking
Light off
Solid Light
A LED Mode Select Button to switch
Link/Act/Speed Mode
A LED Mode Select Button to switch
PoE Mode
When there is a secure connection (or link) to 1000Mbps Ethernet device at any of the ports.
When there is reception or transmission of data occurring at
1000Mbps.
When there is a secure connection (or link) to 10/100Mbps Ethernet device at any of the ports.
When there is reception or transmission of data occurring at
10/100Mbps.
No link.
Power feeding.
Error Condition.
No Power feeding.
When there is a secure connection (or link) to 1000Mbps Ethernet device at any of the ports.
When there is reception or transmission of data occurring at
1000Mbps.
When there is a secure connection (or link) to 100Mbps Ethernet device at any of the ports.
When there is reception or transmission of data occurring at
100Mbps.
No link
When there is a secure connection (or link) to Ethernet device at any of the ports.
When there is reception or transmission (i.e. Activity--Act) of data occurring at a port.
No link
SD card plug-in
Read/Write
No link
SD card failure
35
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Port Functions
Feature
LAN
Mini-GBIC
Combo ports
Detailed Description
24/48 x 10/100/1000Base-T ports for the DGS-3120-24TC/48TC
8 x 10/100/1000Base-T ports for the DGS-3120-24SC/24SC-DC
24/48 x 10/100/1000Base-T PoE ports for the DGS-3120-24PC/48PC
Compliant to following standards:
IEEE 802.3 compliance
IEEE 802.3u compliance
IEEE 802.3ab compliance
Support Half/Full-Duplex operations
Auto-negotiation
Auto MDI/MDIX
IEEE 802.3x Flow Control support for Full-Duplex mode, Back Pressure when Half-Duplex mode, and Head-of-line blocking prevention
16 x SFP ports for DGS-3120-24SC/24SC-DC
SFP Transceivers Supported:
• DEM-310GT (1000Base-LX, Single-mode, 10km)
• DEM-311GT (1000ase-SX, Mutli-mode, 500m)
• DEM-312GT2 (1000Base-SX, Multi-mode, 2km)
• DEM-314GT (1000BASE-LHX, Single-mode, 50km)
• DEM-315GT (1000BASE-ZX, Single-mode, 80km)
• DEM-330T/R (WDM transceiver, Single-Mode 10km)
• DEM-331T/R (WDM transceiver, Single-Mode 40km)
• DGS-712 (1G Copper, 1000Base-T, 100m)
• DEM-210 (100Base-FX, Single-Mode 15km)
• DEM-211 (100Base-FX, Multi-mode, 2km)
• DEM-220T/R (100Base-BX, Single-Mode, 20km)
Compliant to following standards:
• IEEE 802.3z compliance
• IEEE 802.3x Flow Control support for Full-Duplex mode.
• Support Auto-negotiation for Full-Duplex/ flow control operations
Combo 1000BASE-T/SFP ports for DGS-3120-24TC/48TC/24SC/24SC-DC
1000Base-T ports compliant to following standards:
• IEEE 802.3 compliance
• IEEE 802.3u compliance
• IEEE 802.3ab compliance
• Support Full-Duplex operations
• IEEE 802.3x Flow Control support for Full-Duplex mode, Back Pressure when Half-
Duplex mode, and Head-of-line blocking prevention
SFP Transceivers Supported:
• DEM-310GT (1000Base-LX, Single-mode, 10km)
• DEM-311GT (1000ase-SX, Mutli-mode, 500m)
36
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
• DEM-312GT2 (1000Base-SX, Multi-mode, 2km)
• DEM-314GT (1000BASE-LHX, Single-mode, 50km)
• DEM-315GT (1000BASE-ZX, Single-mode, 80km)
• DEM-330T/R (WDM transceiver, Single-Mode 10km)
• DEM-331T/R (WDM transceiver, Single-Mode 40km)
• DGS-712 (1G Copper, 1000Base-T, 100m)
• DEM-210 (100Base-FX, Single-Mode 15km)
• DEM-211 (100Base-FX, Multi-mode, 2km)
• DEM-220T/R (100Base-BX, Single-Mode, 20km)
Compliant to following standards:
• IEEE 802.3z compliance
• IEEE 802.3x Flow Control support for Full-Duplex mode.
• Support Auto-negotiation for Full-Duplex/ flow control operations
37
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Appendix B – Cables and Connectors
Ethernet Cable
When connecting the Switch to another switch, a bridge or hub, a normal cable is necessary. Please review these products for matching cable pin assignment.
The following diagrams and tables show the standard RJ-45 receptacle/connector and their pin assignments.
6
7
8
4
5
2
3
Contact
1
Figure B- 1. The standard RJ-45 port and connector
MDI-X Port
RD+ (receive)
RD- (receive)
TD+ (transmit)
1000BASE-T
1000BASE-T
TD- (transmit)
1000BASE-T
1000BASE-T
RJ-45 Pin Assignments
MDI-II Port
TD+ (transmit)
TD- (transmit)
RD+ (receive)
1000BASE-T
1000BASE-T
RD- (receive)
1000BASE-T
1000BASE-T
38
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Console Cable
When connecting the Switch a PC, a Console cable is necessary. The following diagrams and tables show the standard Console-to-DJ-45 receptacle/connector and their pin assignments.
Pin
3
4
1
2
7
8
5
6
Figure B- 2. Console-to-RJ-45 Cable
Console-RJ-45 Pin Assignments
Console (DB9/RS232)
Not Used
RXD
TXD
Not Used
GND (shared)
Not Used
Not Used
Not Used
RJ-45
Not Used
Not Used
TXD
GND
GND
RXD
Not Used
Not Used
39
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Redundant Power Supply (RPS) Cable
When connecting the Switch to a Redundant Power Supply, an RPS cable is necessary. Please review these products for matching cable pin assignment.The following diagrams and tables show the standard RPS receptacle/connector and their pin assignments.
14-pin DC power cable
Pin
1
2
10
11
12
13
14
7
8
9
5
6
3
4
Figure B- 3. Redundant Power Supply (RPS) 14-pin DC Power Cable
RPS 14-pin DC Power Cable Pin Assignments
Device
GND
NC
+12V
+12V
+12V
+12V
GND
GND
NC
NC
Power Good
Power Present
GND
GND
DPS-200
GND
NC
+12V
+12V
+12V
+12V
GND
GND
Power Good
Power Present
NC
NC
GND
GND
40
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
22-pin DC power cable
12
13
14
15
16
17
18
19
20
21
22
8
9
10
11
6
7
4
5
Pin
1
2
3
Figure B- 4. Redundant Power Supply (RPS) 22-pin DC Power Cable
RPS 22-pin DC Power Cable Pin Assignments
Device
-54Vrtn
-54V
+12V
+12V
+12V
+12V
NC/GND
+12Ven
LS-54V
-54V
-54Vrtn
GND
GND
RPS Present
Status_1
Status_2
RPS PG
GND
+12VRTNsen
LS+12V
-54Vsen
-54VRTNsen
DPS-700
-54Vrtn
-54V
+12V
+12V
+12V
+12V
GND
+12Ven
LS-54V
-54V
-54Vrtn
NC/GND
GND
Status_2
RPS PG
RPS Present
Status_1
GND
+12VRTNsen
LS+12V
-54Vsen
-54VRTNsen
41
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Appendix C – Module Specs and Cable Lengths
Use the following table to as a guide for the module specs and maximum cable lengths.
Standard
Mini-GBIC
Media Type Maximum Distance
1000BASE-LX, Single-mode fiber module
1000BASE-SX, Multi-mode fiber module
1000BASE-LH, Single-mode fiber module
1000BASE-ZX, Single-mode fiber module
10km
550m / 2km
50km
80km
1000BASE-T
100BASE-TX
10BASE-T
DEM-310GT
Category 5e UTP Cable
Category 5 UTP Cable (100 Mbps)
Category 3, 4 or 5 UTP Cable (10 Mbps)
1000Base-LX, Single-mode
100m
100m
100m
10km
DEM-311GT
DEM-312GT2
DEM-314GT
DEM-315GT
DEM-210
DEM-211
DEM-220T
DEM-220R
1000ase-SX, Multi-mode
1000Base-SX, Multi-mode
1000BASE-LH, Single-mode
1000BASE-ZX, Single-mode
100BASE-FX, Single-mode
100BASE-FX, Multi-mode
100BASE-BX, Single-mode
100BASE-BX, Single-mode
500m
2km
50km
80km
15km
2km
Up to 20km
Up to 20km
DEM-330T
DEM-330R
DEM-331T
DEM-331R
TX-1550/RX-1310nm, Single-mode
TX-1310/RX-1550 nm, Single-mode
TX-1550/RX-1310 nm, Single-Mode
TX-1310/RX-1550 nm, Single-Mode
Up to 10km
Up to 10km
Up to 40km
Up to 40km
DGS-712 1G Copper, 1000BASE-T 100m
Network pluggable optical modules meet the following regulatory requirements:
• Class 1 Laser Product
• EN60825-1+A2:2001 or later, European laser standard
• FCC 21 CFR Chapter 1, Subchapter J in accordance with FDA & CDRH requirements
42
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Warranties
43
xStack
®
DGS-3120 Series Managed Switch Hardware Installation Guide
Technical Support Information
44
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Intended Readers
- 5 Typographical Conventions
- 5 Notes, Notices, and Cautions
- 6 Safety Instructions
- 6 Safety Cautions
- 7 General Precautions for Rack-Mountable Products
- 8 Protecting Against Electrostatic Discharge
- 9 Chapter 1 Introduction
- 9 Switch Description
- 10 Features
- 12 Ports
- 13 Front Panel Components
- 14 LED Indicators
- 16 Rear Panel Description
- 17 Side Panel Description
- 18 Chapter 2 Installation
- 18 Package Contents
- 18 Installation Guidelines
- 19 Installing the Switch without a Rack
- 19 Attaching Brackets to a Switch for Rack Mounting
- 20 Mounting the Switch in a Standard 19" Rack
- 20 Power On (AC Power)
- 20 Power Failure (AC Power)
- 21 Connecting DC Power to the DGS-3120-24SC-DC
- 21 Installing SFP Ports
- 23 Connect to a Redundant Power Supply
- 24 External Redundant Power System
- 24 DPS-700
- 26 DPS-800
- 27 DPS-900
- 29 Chapter 3 Connecting the Switch
- 29 Switch to End Node
- 30 Switch to Switch
- 31 Connecting to Network Backbone or Server
- 32 Chapter 4 Introduction to Switch Management
- 32 Management Options
- 32 Connecting the Console Port
- 34 First Time Connecting to the Switch
- 34 Password Protection
- 35 IP Address Assignment
- 35 SNMP Settings
- 36 Traps
- 36 MIBs
- 37 Chapter 5 Web-based Switch Configuration
- 37 Introduction
- 37 Logging onto the Web Manager
- 38 Web-based User Interface
- 38 Areas of the User Interface
- 38 Web Pages
- 40 Appendix Section
- 40 Appendix A – Technical Specifications
- 40 General
- 40 Physical and Environmental
- 41 Performance
- 42 LED Indicators
- 44 Port Functions
- 46 Appendix B – Cables and Connectors
- 46 Ethernet Cable
- 47 Console Cable
- 48 Redundant Power Supply (RPS) Cable
- 50 Appendix C – Module Specs and Cable Lengths