advertisement
B
P-Series Emulation
Character Sets
Introduction
This appendix shows the character set charts (also referred to as code pages) for the P-Series emulation. The character sets are shown in Near Letter
Quality (NLQ). They may be selected using the configuration menus, described in detail in your User’s Guide . There are also several control codes that allow you to select different character sets, described in Chapter 3 of this book. These include “SFCC l”, “SFCC OSET”, “SFCC R” and “SFCC PSET”.
The maximum set of printable symbols is shown for columns hex 80-9F
(selected via the ESC 6 control code).
223
Appendix B P-Series Emulation Character Sets
IBM PC, Primary Subset: ASCII (USA)
224
IBM PC, Primary Subset: French
225
Appendix B P-Series Emulation Character Sets
IBM PC, Primary Subset: German
226
IBM PC, Primary Subset: English (UK)
227
Appendix B P-Series Emulation Character Sets
IBM PC, Primary Subset: Danish
228
IBM PC, Primary Subset: Swedish
229
Appendix B P-Series Emulation Character Sets
IBM PC, Primary Subset: Italian
230
IBM PC, Primary Subset: Spanish
231
Appendix B P-Series Emulation Character Sets
IBM PC, Primary Subset: Japanese
232
IBM PC, Primary Subset: French Canadian
233
Appendix B P-Series Emulation Character Sets
IBM PC, Primary Subset: Latin American
234
IBM PC, Primary Subset: Danish II
235
Appendix B P-Series Emulation Character Sets
IBM PC, Primary Subset: Spanish II
236
IBM PC, Primary Subset: Latin American II
237
Appendix B P-Series Emulation Character Sets
IBM PC, Extended Subset: 0437 PC Character Set
238
IBM PC, Extended Subset: 0850 PC Multilingual
239
Appendix B P-Series Emulation Character Sets
Multinational, ASCII (USA)
240
Multinational, EBCDIC
241
Appendix B P-Series Emulation Character Sets
ECMA Latin 1, Primary Subset: ASCII (USA)
242
ECMA Latin 1, Primary Subset: German
243
Appendix B P-Series Emulation Character Sets
ECMA Latin 1, Primary Subset: Swedish
244
ECMA Latin 1, Primary Subset: Danish
245
Appendix B P-Series Emulation Character Sets
ECMA Latin 1, Primary Subset: Norwegian
246
ECMA Latin 1, Primary Subset: Finnish
247
Appendix B P-Series Emulation Character Sets
ECMA Latin 1, Primary Subset: English (UK)
248
ECMA Latin 1, Primary Subset: Dutch
249
Appendix B P-Series Emulation Character Sets
ECMA Latin 1, Primary Subset: French
250
ECMA Latin 1, Primary Subset: Spanish
251
Appendix B P-Series Emulation Character Sets
ECMA Latin 1, Primary Subset: Italian
252
ECMA Latin 1, Primary Subset: Turkish
253
Appendix B P-Series Emulation Character Sets
ECMA Latin 1, Primary Subset: Japanese
254
ECMA Latin 1, Extended Subset: Multinational
255
Appendix B P-Series Emulation Character Sets
ECMA Latin 1, Extended Subset: Barcode 10 cpi
256
ECMA Latin 1, Extended Subset: Greek
257
Appendix B P-Series Emulation Character Sets
ECMA Latin 1, Extended Subset: Graphic
258
ECMA Latin 1, Extended Subset: Scientific 10 cpi
259
Appendix B P-Series Emulation Character Sets
DEC Multinational, ASCII (USA)
260
DEC Multinational, French
261
Appendix B P-Series Emulation Character Sets
DEC Multinational, German
262
DEC Multinational, English (UK)
263
Appendix B P-Series Emulation Character Sets
DEC Multinational, Norwegian/Danish
264
DEC Multinational, Swedish
265
Appendix B P-Series Emulation Character Sets
DEC Multinational, Italian
266
DEC Multinational, Spanish
267
Appendix B P-Series Emulation Character Sets
DEC Multinational, Japanese
268
DEC Multinational, French Canadian
269
Appendix B P-Series Emulation Character Sets
DEC Multinational, Dutch
270
DEC Multinational, Finnish
271
Appendix B P-Series Emulation Character Sets
DEC Multinational, Swiss
272
OCR A
273
Appendix B P-Series Emulation Character Sets
OCR B
274
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 Front of Document
- 7 Table of Contents
- 17 Introduction
- 17 About This Guide
- 17 Warnings and Special Information
- 18 Related Product Information
- 19 Software Features
- 19 PCL-II
- 20 Proprinter III XL
- 20 Epson FX-1050
- 27 HP PCL-II
- 27 Introduction
- 28 HP PCL-II Emulation Default Settings
- 28 Switching Between the Emulations
- 29 Configuring the PCL-II Emulation with Control Codes
- 29 Printer Feature Set Compatibility
- 30 General Information
- 31 Escape Sequences
- 34 Bar Codes
- 38 Bar Code Width Information
- 47 Character Density Selection
- 50 Character Font Selection
- 53 Character Overstrike
- 53 Character Style Selection
- 54 Cursor Control
- 55 Display Functions Mode
- 55 Horizontal Margin Selection
- 56 Logical Page Length Selection
- 57 Perforation Skip Mode
- 58 Print Mode Selection
- 58 Print Pitch Selection
- 58 Printing in the Hex 80 through Hex FF Region
- 59 PTX Linefeed
- 60 Programmable Reset
- 60 Programmable VFC
- 69 Raster Graphics
- 71 Self-test
- 71 Standard (Computed) VFC
- 71 Stroke Weight (Bold)
- 71 Switching Character Fonts
- 72 Text Length (Vertical Margin) Selection
- 72 Transparent Print Data
- 72 Underline Mode
- 73 Vertical Forms Control (VFC)
- 74 HP 3000 Information
- 74 Feature Access and Transparent Modes
- 74 VFC Download with a Serial Interface
- 75 Carriage-Control Directives
- 75 Printing in the Perforation Skip Region
- 76 HP 1000 Information
- 76 Downloading VFC
- 76 Perforation Skip Mode
- 77 P-Series Printer Emulation
- 77 Overview
- 78 P-Series Default Values and States
- 80 Configuring the P-Series Emulation with Control Codes
- 113 Overview
- 80 Format for Control Code Descriptions
- 80 Switching Between the Emulations
- 81 Special Function Control Code (SFCC) Header
- 81 SFCC Command Line
- 82 Attribute Set and Reset Codes
- 82 NUL Code
- 82 Print Modes Supported for Character Sets
- 83 The Control Codes
- 85 Backspace
- 86 Bold Print
- 86 Bold Print Reset
- 87 Carriage Return
- 88 Character Set Select
- 90 Character Set Select: ECMA Latin 1 Extended
- 91 Character Set Select: International Languages
- 92 Characters 80-9F (Control Codes)
- 92 Characters 80-9F (Printable Symbols)
- 93 Elongated (Double High) Print, One Line Only
- 94 Elongated (Double High) Print, Set/Reset
- 94 Emphasized Print
- 95 Emphasized Print Reset
- 95 Emulation Reset
- 96 Expanded Print (Double Wide), One Line Only
- 96 Expanded Print (Double Wide), Set/Reset
- 97 Extended Character Set
- 97 Extended Character Set Cancel (Primary Set Select)
- 98 Form Feed
- 99 Forms Length Set (Inches)
- 99 Forms Length Set (Lines)
- 100 Line Feed
- 100 Line Spacing 1/6 Inch (6 lpi)
- 101 Line Spacing 1/8 Inch (8 lpi)
- 101 Line Spacing 8 or 10.3 lpi (1 Line Only)
- 102 Line Spacing 7/72 Inch
- 103 Line Spacing n/72 Inch
- 104 Line Spacing n/216 Inch
- 104 Overscoring
- 105 Plot, Even Dot (P-Series High Density Graphics)
- 105 Plot, Odd Dot (P-Series Normal Density Graphics)
- 106 Print Mode/Pitch Selection
- 110 Superscript/Subscript Printing
- 110 Superscript/Subscript Printing Reset
- 111 Underline
- 111 VFU Commands
- 111 Vertical Tab
- 113 IBM Proprinter III XL
- 113 Overview
- 114 Proprinter III XL Emulation Default Settings
- 116 Configuring the Proprinter III XL Emulation with Control Codes
- 116 Format for Control Code Descriptions
- 116 Escape Control Codes Overview
- 117 Graphics Control Codes Overview
- 119 Switching Between the Emulations
- 120 The Control Codes
- 122 Backspace
- 122 Bell
- 123 Bit Image Mode, Single Density (Normal Speed)
- 124 Bit Image Mode, Double Density (Half Speed)
- 125 Bit Image Mode, Double Density (Normal Speed)
- 126 Bit Image Mode, Quadruple Density (Half Speed)
- 127 Bold Printing
- 127 Bold Printing, Cancel
- 128 Cancel
- 128 Carriage Return
- 129 Carriage Return Set
- 129 Character Set Select: Set 1 (A)
- 129 Character Set Select: Set 2 (B)
- 130 Condensed Print
- 130 Condensed Print, Cancel
- 131 Deselect Printer
- 131 Double Wide Print
- 132 Double Wide Print (One Line Only)
- 132 Double Wide Print (One Line Only) Cancel
- 133 Emphasized Print
- 133 Emphasized Print, Cancel
- 134 Form Feed
- 134 Forms Length Set in Inches
- 135 Forms Length Set in Lines
- 136 Initialize Parameters
- 138 Line Feed
- 139 Line Feed n/216 Inch (One Line Only)
- 140 Line Spacing 1/8 Inch (8 lpi)
- 140 Line Spacing 7/72 Inch (10.3 lpi)
- 141 Line Spacing n/72 Inch (Executes)
- 142 Line Spacing n/72 Inch (Storage)
- 143 Line Spacing n/216 Inch
- 144 Margin, Bottom
- 144 Margin Cancel, Bottom
- 144 Margins, Horizontal
- 145 Overscoring
- 145 Print All Characters
- 146 Print Next Character
- 146 Print Mode
- 147 Print Quality
- 147 Proportional Spacing
- 148 Select Attributes
- 149 Set Top-of-Form
- 150 Superscript/Subscript Printing
- 150 Superscript/Subscript Printing, Cancel
- 151 Tab, Horizontal
- 151 Tab Set/Clear, Horizontal
- 152 Tab, Vertical
- 153 Tab Set/Clear, Vertical
- 153 Tabs, Clear All (Return to default)
- 154 Underline
- 154 Unidirectional Printing
- 155 Epson FX-1050 Emulation
- 155 Overview
- 156 Epson FX-1050 Default Values and States
- 158 Epson Emulation Exceptions and Differences
- 159 Epson Character Sets
- 160 Configuring the Epson FX-1050 Emulation with Control
- 160 Format for Control Code Descriptions
- 160 Escape Sequences
- 161 Attribute Set and Reset Codes
- 161 NUL Code
- 161 Switching Between the Emulations
- 162 The Control Codes
- 165 Backspace
- 165 Bell
- 165 Cancel Line
- 166 Carriage Return
- 166 Character Pitch 10 CPI
- 166 Character Pitch 12 CPI
- 166 Character Pitch 15 CPI
- 167 Character Set Select: International Languages
- 168 Clear Bit 7 of Incoming Data Bytes to 0
- 168 Condensed Print
- 169 Condensed Print Reset
- 169 Define a Download Character
- 169 Delete Character
- 170 Double High Print, Set/Reset
- 170 Double Strike
- 171 Double Strike, Cancel
- 172 Double Wide Print (One Line)
- 172 Double Wide Print (One Line), Cancel
- 173 Emphasized Print
- 173 Emphasized Print, Cancel
- 173 Enable Printing Hex Codes 00-1F and 80-9F
- 175 Form Feed
- 175 Graphics, Standard Density
- 176 Graphics, Double Density
- 177 Graphics, Double Density Double Speed
- 178 Graphics, Quadruple Density
- 178 Half Speed Mode, On/Off
- 179 Horizontal Tab Execute
- 180 Initialize Printer
- 180 Italic Printing
- 180 Italic Printing, Cancel
- 181 Line Feed
- 181 Line Feed n/216 Inch
- 182 Line Spacing 1/6 Inch (6 lpi)
- 182 Line Spacing 1/8 Inch (8 lpi)
- 183 Line Spacing 7/72 Inch
- 183 Line Spacing n/216 Inch
- 184 Line Spacing n/72 Inch
- 184 Make Hex 80-9F Control Codes
- 184 Make Hex 80-9F Printable
- 186 Master Print Select
- 186 Paper Out Detection, Enable
- 187 Paper Out Detection, Disable
- 187 Pass Bit 7 from Host
- 187 Printer Select
- 187 Printer Deselect
- 188 Reassign Graphics Mode
- 188 Remove Downloaded Characters
- 189 Select Graphics Mode
- 190 Select Italic Character Set
- 190 Select 9-Pin Graphics Mode
- 191 Select Print Quality
- 191 Select/Deselect Proportional Spacing
- 192 Select Serif or Sans Serif Font
- 192 Select User-Defined Font
- 192 Select Vertical Tab Channel
- 193 Set Absolute Horizontal Print Position in 1/60 Inch
- 193 Set Bit 7 of Incoming Data Bytes to 1
- 193 Set Form Length in Inches
- 194 Set Form Length in Lines
- 195 Set Intercharacter Spacing in 1/120 Inch
- 195 Set Margin, Left
- 195 Set Margin, Right
- 196 Set Relative Horizontal Print Position in 1/120 Inch
- 196 Set Vertical Tabs in Channels
- 197 Skip Over Perforation
- 197 Skip Over Perforation, Cancel
- 198 Superscript and Subscript Printing
- 198 Superscript and Subscript Printing, Cancel
- 199 Underline
- 199 Unidirectional Printing, 1 Line
- 199 Unidirectional Printing, Set/Reset
- 200 Vertical Tab, Execute
- 200 Vertical Tab, Set/Clear
- 201 Graphics
- 201 Overview
- 201 Bit Image Graphics
- 203 Designing a Bit Image Pattern
- 204 Bit Image Programming Format
- 205 Bit Image Sample Program
- 206 Plot Mode
- 206 Plot Density
- 207 Plot Data Byte Format
- 208 Plot Data Line Format
- 210 Plotting the Data
- 211 Exiting from P-Series Plot Mode
- 212 Combining Graphics and Text
- 215 Vertical Page Formatting
- 215 Overview
- 215 Planning a Vertical Page Format
- 216 VFU Characteristics
- 216 Proprinter and Epson Vertical Tab Table
- 216 Executing Vertical Tabs
- 217 Vertical Tab Positions
- 218 P-Series EVFU (Electronic Vertical Format Unit)
- 218 Start Load Code - Hex 1E
- 218 Channel Assignment
- 218 End Load - Hex 1F
- 219 Using the EVFU
- 220 Clearing the EVFU Memory
- 221 Standard ASCII Character Set
- 223 P-Series Emulation Character Sets
- 223 Introduction
- 224 IBM PC, Primary Subset: ASCII (USA)
- 240 Multinational, ASCII (USA)
- 242 ECMA Latin 1, Primary Subset: ASCII (USA)
- 260 DEC Multinational, ASCII (USA)
- 273 OCR A
- 274 OCR B
- 275 Proprinter Emulation Character Sets
- 275 Introduction
- 276 0437 PC Character Set
- 277 0850 PC Multilingual
- 278 OCR A
- 279 OCR B
- 281 Epson Emulation Character Sets
- 281 Introduction
- 282 0437 PC Character Set
- 283 0850 PC Multilingual
- 284 Epson Set, ASCII (USA)
- 285 Epson Set, French
- 286 Epson Set, German
- 287 Epson Set, English (UK)
- 288 Epson Set, Danish I
- 289 Epson Set, Swedish
- 290 Epson Set, Italian
- 291 Epson Set, Spanish I
- 292 Epson Set, Japanese
- 293 Epson Set, Norwegian
- 294 Epson Set, Danish II
- 295 Epson Set, Spanish II
- 296 Epson Set, Latin American I
- 297 Epson Set, French Canadian
- 298 Epson Set, Latin American II
- 299 OCR A
- 300 OCR B
- 301 Index